REPAIRS AND REPLACEMENT OF JOINERY AND OTHER MISC WORK AT MD, OTM, MES AREA AT WEST SIDE OF LEHL MARG UNDER GE (S) BINNAGURI

Amount

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and removal off the site.

All as item No 1 here-in before but n.exc 1.5 Sqm each complete all as specified and removal off the site.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and removal off the site.

Taking down shutters and refixing in same openingof any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and removal off the site.

Re-securing or Easing and adjusting without taking down of shutter of any description exc 1 sqm but not exc 2.0 sqm complete all as specified.

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and removal off the site.

Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) and removal off the site.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc and removal of rubbish off the site complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc complete all as specified and removal off the site.

Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins complete all as specified and removal off the site.

S&Fof 3mm thick float glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified.

All as per item No.11 here-in- above but 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete all as specified.

M & L for providing plain cement concrete type C-0, 1:3:6, (using 12.5 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified and directed

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified.

M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified.

S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats.

S&F in of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existiog opening and making to match as per existing surfaces complete all as specified.

S&F in of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows complete all as specified.

S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and directed .

S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified.

S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed.

S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doors complete all as specified.

M&L for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties etc including one coat of red oxide paint.

Supply & fix framed work such as grills, gratings, etc., with ends of bars shouldered and/or rivetted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified.

S&F in repairs of 18 / 19mm thick block board grade 2 quality with decorative face veeners on one face fixed with screws to timber frame work as in repair including teak wood lipping 6mm thick all round fixed with nails complete all as specified.

S&F 8/9mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, corner cove,F/J edge trims where required fixed with hidden screws to and incl steel/wooden frame work of width 75mm complete all as specified and as directed.

Supply and fixing as in repair for aluminium anodised snap grid false ceiling to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including hanging proper hanging arrangement with 4 mm dia anodized galvanised iron wire and adjuster complete as specified.

S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as dirceted.

M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified.

M&L for applying one coat of synthetic enamel paint including preparation of old wood or wood based surface complete all as specified.

M&L for applying one coats of synthetic enamel paint including preparation of old steel surface over 10cm width or girth, not otherwise described.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth complete all as specified.

M & L for two coat of acrylic distember on new wall surface including preperation of the surface complete all as specified.

M&L for applying 1.0 mm thick (average thickness) wall care putty on new or old wall surface complete all as specified.

Material and labour applying one coat of exterior acrylic emulsion paint all as per manufacturer's specification including prepration of wall, chujja, facia etc surface as specified and as directed .

S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified.

S&F in repair 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified.

M&L for 150 mm size aluminium anodised cast type handles complete all as specified.

M&L in repair for 150 mm size aluminium anodised cast type handles complete all as specified.

S&F for 150mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified.

S&F in reapir of 150mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified.

S&F for 100mm size mild steel butt hinges medium weight complete all as specified.

S&F in repair of 100mm size mild steel butt hinges medium weight complete all as specified.

S&F in reapir 75mm size stainless steel butt hinges with mild steel hinge pin complete all as specified.

S &F in repair stainless steel (SS304 grade) curtain rods 20 -25 mm dia, anodised aluminium alloy with fixing brackets, stops,and complete fitments all as specified and directed.

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed.

M&L for glazed coloured ceramic tiles (350x450x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed.

S & F Continuous (piano) hinges Width of flaps 30 mm , mild steel, bright finish or electro galvanised complete all as specified.

S&F in repair Hasp and staple, aluminium anodised,100mm long including bolt to hinge plate and fixed with screws complete all as specified.

S&F Hasp and staple, aluminium anodised,100mm long including bolt to hinge plate and fixed with screws complete all as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair complete all as specified.

Material and labour rendering 20mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces in two layer 10mm each layer and top layer mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Supply only liquid water proofing compound complete all as specified.

NARAYAN MAJUMDER

SHRI ARABINDA GHOSH

SHIVAAY CONSTRUCTIONS

M/S NIKITA ENGINEERING CO

R K AGARWAL

MESSRS SEN BROTHERS

AYAN DAS