Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹33.0 L
EMD Value
₹33,000
Closing Date
1 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Irrigation Mechanical Division No.7, Ahmedabad
Fabrication, manufacturing, supplying & erection work of New Chequared Plate with cross girder on hoist platform by dismantling old rusted chequared plate and cross girder, Providing, fabrication and fitting of new CDU-DHU Cover and its parts like Worm reduction gear unit, Electric motor, dog clutch, forward-reverse gear box, 10 HP Diesel Engine, Tyre coupling, EM Brake, Hand operation system and mechanical brake arrangement with wire and pulley by disnmantling old, Providing and fitting of New Rubber seal by dismantling old and other Mis. work for Radial gate size 30 x 20- Total- 3 Nos of Hamirpara Irri.Project. (Dist-Bhavnagar).
366065
20 of 2026-27
Open
Miscellaneous Works
Works
Ahmedabad
13 documents required · 12 mandatory · 1 optional
₹1,500
Executive Engineer, Irrigation mechanical Division No. 7, Ahmedabad
₹33,000
17 Nov 2026
17 Nov 2026
17 Nov 2026
1 Dec 2026
17 Nov 2026
120 days
Name of work :- Fabrication, manufacturing supplying & erectfln work of New Plate with cross girder on hoist platform by dismantling otd
rusd chequ.rrd pl.ta 9nd q!.5 tld€r, proyldln& f.brlc.Uon & itdry o, n w GDI}DHU Oovcr.nd h'. p.rtt llk Wo.m rcducdon ge.r untg El€ctrlc
moto., dot dudl, rorsard-reveE€ te.. bor, 10 HP Dlerel Erylne,lvrr Gouplln& EM arak€, H.nd oDGr.tlon sy$em & medt.nlcal brake Er.antement
wl6 wllt e pufley by dl5nm.ndlnt ol4 Prorldilr8 and fitdry of tl€w R!!be. teal by dlsm.ndlnt old & othe. Mb. wo* fo. Radlel 8.t shr 3dl2d-
Tot l- 3 Noc of H.mlrp.r. ld.Prclcct, Dbt-thtyn 8.r.
Item Description of ltem (with brief specification and reference to book of Rate in figures
Quantity Unit Amount
No. specifications)
ln Figures ln Words
Providing & fitting of MS chquared plate I mm thick for Hoist Platform by
dismantling existing 5 mm thick chequared plate of Hoist Platform and all cross
girder of hoist platform by dismantling old including cost of material, Four Lakh Eighty-Nine
1 labour,fabrication, erection, dismantling, painting, transportation etc complete as 3 GATE 489540.00 Thousand Five Hundred
per actual requirement & specification for Radial gate size 30'x20' -Total - 03 Nos Forty Rupees
of Hamirpara lrri.Project. Dismantled scrap material removed from the work will
be given to contractor.
Providing & fitting of new CDU-DHU parts like Worm reduction gear, Electric
motor, dog clutch, forward-reverse gear box, 10 HP diesel engine, tyre coupling,
hand operation system & mechanical brake arrangement with wire & pulley, Dial
lndicator system and bolt-nuts with providing & fitting of new modified cabin
cover made from 4 mm sheet with bracing angles having doors & locking
arrangement in cabin of C D Unit, D H Unit by dismantelling old components.
Providing and fiitng of New combine base frame of CD U & DHU & foundation of
Four Lakh Twenty-Five
engine & gear box of DHU by dismentle exisitng cross support channels below
frame, CD unit Base frame and install the new components in proper line & level Thousand Four Hundred
in C D Unit. Providing & fitting new chequarred plate at tap between hoist Forty-Seven Rupees and
platform and spillway bridge, Providing and fitting new channel - 5 nos and angle Seventy-Nine Paise
2 nos below hoist platform at main girder to girder for cleaning and painting
works etc lncluding cost of material, gas for cutting, welding, labour, tools,
tackles, scaffoldings, painting & transportation etc complete as per instruction of
engineer-in charge & specification for Radial gate size 30'X20'-03 for Hamirpara
lrri. Project. Dismantled scrap materials coming from this work will be given to
Providing & fitting of new "Z" type side rubber seal 130x76x19 mm & flat type
bottom Rubber seal80x10mm with providing and fitting of New side seal plates,
bottom seal plate, angle, rubber seal, new S.S.-AlSl.304 Hex. Head & C.S.K. type
bolts & nuts & Washers etc including dismantling of old Rubber seal & S S Bolts - Seventy-Eight Thousand
3 nuts & Washerc, side & bottom seal plates, angle etc. including cost of material, 3 GATE 78445.m Four Hundred Forty-Five 23s335.00
gas cutting,welding,labou r,painting, tools,tackles,scaffolding, Transportation Rupees
etc.as per drawing and specification of Radial gate size- 30'x20' -03 no's gate for
Hamirpara lrri. Project. Dismantled scrap material removed from the work will be
given to contractor.
Manufacturing, supplying & erecting of wire rope with rope socket- 4 no's, ss410
Quality socket pin-4 no's and providing & fitting of 25 mm dia. wire rope fiber
core type galvanized wire rope 6 x36 I 37 construction, rope clamp, H T bolts etc.
& fixing of one end of wire rope in new rope socket by filling of zinc metal &
other end of fixing on rope drum by clamp& H T bolts with applying cardium Sixty-Eight Thousand
4 compound to wire rope & alignment of gate etc. complete complete including 3 58110.00 One Hundred Ten
cost of material, fabrication, erection, labour, jigs and fixture, tools, tackles, Rupees
painting & transportation etc and dismantled scrap materials coming from this
work will be given to contractor etc complete as per drawing, direction of
engineer in charge & specification for Radial gate size 30'x20' -Total - 03 Nos of
Hamirpara lrri.Project.
Fabrication, supplying & erection of structural steel like M.S plates = 500 kg & M.S
Angles = 500 kg of required size & length for misc. Repairing work during tender
erection work including cost of gas for cutting,labour, tools & tackles, scaffolding, One lakh fourteen
5 safety equipment, transportation and painting with one coat of red oxide primer 1 Job 114534.00 thousand five hundred
paint and two coats of anti corrosive enamel paint etc.complete as per drawing, thirty-four rupees
specification and direction of engineer in charge for Radial tate size 30'x20' -Total
- 03 Nos of Hamirpara lrri.Project.
( tn words :- Rupees Thirty Two Lakh Ninety Nine Thousand One Hundred Sixty Two Onty l
( Signature of Contractor )
Deputy Executive Engineer
sxecutiv&/gineer
lrri. Mech. Sub. Div. No-712 lrri. Mech.Div. No-7
Gandhinagar Ahmedabad
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD Hamirpara Final_signed.pdf
Hamirpara BOQ.pdf
Tender Notice No. 20 of 2026-27.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .