GENERAL Non Plan 2020 21 Providing cabin work in NH Subdivision Office and Sheet Roofing at top of PWD Complex Punalur Work General Civil work

Amount

APPENDIX A: PROVIDING PARTITION AND CABIN WORKS

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge. Pre- laminated particle board with decorative lamination on both sides

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness

21.16.1:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium

APPENDIX B: PROVIDING CUPBOARD AND FURNITURE WORK

od69453/2019_2020/BL:providing and fixing High Density fiber board exterior grade panelling 18mm thick for office cubicle ,cupboard etc to frame ,backing or studding with screws,finishing and painting in all respect etc complete as per the direction of site engineer in charge

od69455/2019_2020/BL:providing and fixing both side laminated MDF board 18mm thick for office cublicle cupboard etc to frame backing or studding with screw etc complete as per the direction of engineer in charge

9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.

od69456/2019_2020/BL:providing and fixing steel Auto close hinges with necessary screws etc complete

9.90.1:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 40 mm

9.92.2:Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100 mm

9.114.2:Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)

od69785/2019_2020/BL:Providing and fixing partition arrangements with computer table using 18mm thick MDF one side decorative and other side balancing, Framing with second class teak wood, view panel with 5.5 mm thick clear float glass, Drawer, storage, key board tray etc (Size of cubicle 1.3x0.6x1.2m)

50.9.11.2:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.

APPENDIX - C - PROVIDING SHEET ROOFING AT TOP OF PWD COMPLEX, PUNALUR

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od76479/2019_2020/BL:Roofing with galvalume sheet 0.4mm thick with overlap 150mm at ends and selfdrilling screw including plain washers and bitumen washers etc.complete.

od76467/2019_2020/BL:Providing ridges or hips with Galvalume sheet 0.40mm thick ridge capping fixed with<br>polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete

4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

13.1.2:12 mm cement plaster of mix: 1:6 (1 cement : 6 fine sand).

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

od77221/2019_2020/BL:Engaging Man coolies

N V AJAYAKUMAR

Bidder Name

NASHA KABEER

N V AJAYAKUMAR