Special repairs to Sewage Lines in certain locations and Provn of other sanctioned Jobs at INS Valsura, Jamnagar

Amount

Demolition of brick/ PCC block work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of entire debris as ordered outside MoD land complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for in this Schedule and removal of entire debris as ordered outside MoD land complete all as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, including removal of entire debris as ordered outside MoD land complete all as directed.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC or Reinforced concrete) of 150 mm internal dia set in cement mortar including bedding and haunching complete all as specified and as directed

All same as per serial item No. 4 here-in-above, but 200 mm bore.

All same as per serial item No. 4 here-in-above, but 300 mm bore.

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed.

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed.

All as per item No. 8 here-in-above but exc 1.5 m and not exc 3.0 m in depth -do-

Returning, filling in trenches, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance exceeding 250m but not exceeding 500m and depositing where directed.

M&L for broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.

M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs, mud stops, coved fillets and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed.

M&L for cement concrete 1:3:6 type C1, using 20mm graded crushed stone aggregate as in copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed.

M&L for factory made pre cast cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified & as directed.

M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:4) complete all as specified & as directed. Note :- Reinforcement shall be measured and paid for separately under respective item of this Schedule.

Supply only Integral Water Proofing Compound (ISI Marked).

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.

M&L for 75 mm thick plain cement conctere 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection, hard standing, etc, finished the surface even and smooth without using extra cement, complete all as specified & as directed. Note : Plinth protection shall be of width as directed and shall be laid with an outward slope of 1:40 in alternative bays not exceeding 2.5 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic filling comprising 1 part of heated bitumen Blown grade any penetration and 3 parts of sand (all by weight). Quoted rate of this item shall deemed to include this provision.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregate) as in sub-floors, sub-bases, floors and pavings, etc finished fair and even complete all as specified & as directed.

M&L for machine pressed coloured chequered cement concrete tiles of size 295x295x25 mm thick with grey cement and pigments, set and jointed in neat cement slurry in floors and pointed with coloured cement to match the shade of tiles and laying over & including 15 mm thick screed bed in CM 1:6 complete all as specified. Notes: (i) Quoted rate shall deemed to be inclusive of cement screed. (ii) Colour of tiles shall be got appproved from GE before incorporation in the work.

M&L for factory made M-35 grade, 60 mm thick machine pressed, rubber moulded precast cement concrete interlocking paver blocks of shape and size as directed with grey cement and pigment confirming to IS: 15658-2006 (ISI marked), laid over and including 50 mm thick compacted sand cushion complete all as specified and as directed. Notes : (i) Quoted rate shall deemed to be inclusive of 50 mm thick compacted sand cushioning. (ii) Shape of paver blocks shall be as approved by the GE.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall mixed with WPC mixed @ minimum 3% by weight of cement or as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid for separately as 'Supply only'.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints/ solvent cement joints, laid in trenches or in floors, complete all as specifed & as directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls, complete all as specified & as directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints/ solvent cement joints, laid in trenches or in floors, complete all as specifed & as directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls, complete all as specified & as directed.

S&F in repair 75mm bore PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as specified & as directed.

S&F in repair 110mm bore PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as specified & as directed.

S&F in repair 75mm bore PVC (SWR) junction single (single T) equal or unequal with access door including jointing the same with solvent cement complete all as specified & as directed.

S&F in repair 110mm bore PVC (SWR) junction single (single T) equal or unequal with access door including jointing the same with solvent cement complete all as specified & as directed.

S&F in repair 75mm bore PVC (SWR) branch piece (Single Y) equal or unequal with access door including jointing the same with solvent cement complete all as specified & as directed.

S&F in repair 110mm bore PVC (SWR) branch piece (Single Y) equal or unequal with access door including jointing the same with solvent cement complete all as specified & as directed.

S&F in repair PVC (SWR) Vent cowl 75mm bore size fixed complete all as directed.

S&F in repair PVC (SWR) Vent cowl 110mm bore size fixed complete all as directed.

S&F in repair PVC (SWR) gully trap 125/110 mm including jonting with solvent cement complete all as specified & as directed.

S&F in repairs 100 mm bore Cast Iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears, fixed with cement joints, laid in trenches or floors, complete all as specified and as directed.

S&F in repairs 100 mm bore Cast Iron, sand cast, soil, waste and vent pipes (ISI marked) in any length with or without ears, fixed with cement joints, fixed to walls, complete all as specified and as directed.

S&F in repairs 75 mm bore Cast Iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears, fixed with cement joints, laid in trenches or floors, complete all as specified and as directed.

S&F in repairs 75 mm bore Cast Iron, sand cast, soil, waste and vent pipes (ISI marked) in any length with or without ears, fixed with cement joints, fixed to walls, complete all as specified and as directed.

S&F in repair 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval acess door complete all as specified and as directed.

S&F in repair 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval acess door complete all as specified and as directed.

S&F in repair 100mm bore cast iron branch piece, 'Y', 'T', single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval acess door complete all as specified and as directed.

S&F in repair 75mm bore cast iron branch piece, 'Y', 'T', single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval acess door complete all as specified and as directed.

S&F in repair 100mm bore Cast Iron vent cowl complete all as specified & as directed.

S&F in repair 75mm bore Cast Iron vent cowl complete all as specified & as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore drain pipe complete all as specified and as directed. Note : Drain pipe shall be measured and paid for separately.

All as per serial item No. 48 here-in-above, but for 200mm bore pipe -do-

All as per serial item No. 48 here-in-above, but for 300 mm bore pipe -do-

All as per serial item No. 48 here-in-above, but for 450 mm bore pipe -do-

S&F salt glazed stone ware drain pipes of 150mm bore, Class ‘SP 2’, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified & as directed.

M&L for Reinforced concrete pipe 150 mm bore, Class NP2 with collars, laid to slope in trenches & jointed in cement mortar (1:1) and tested on completion, complete all as specified and as directed.

All as per serial item No. 53 here-in-above, but 200 mm bore -do-

All as per serial item No 53 here-in-above, but 300 mm bore -do-

All as per serial item No 53 here-in-above, but 450 mm bore -do-

M&L for cutting into existing manholes/Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate), reforming benching as required and finishing surface even & smooth for 150mm bore pipe complete all as specified and as directed.

All as per serial item No. 57 here-in-above, but for 200 mm bore pipe -do-

All as per serial item No. 57 here-in-above, but for 300 mm bore pipe -do-

Supply and laying of instant ready mix premixed bituminous material for repairing depression on pot holes, material consisting of modified all-weather bitumen paste in liquid asphalt with chemicals, anti-stripping agents, graded aggregates & additives / granular material 5-20mm crushed stone aggregate with 5.5% of bitumen, in 25 Kg bag, laid as per manufacturer’s instructions including preparation of surfaces, complete all as specified & as directed. Make: ‘ShaliPatch’ of STP Ltd or equivalent as approved by GE. Note : The unit of measurement and payment purpose is ‘Per Bag’ of 25 Kg ready mix material.

Cutting and cleaning of vegetation, tree, grass and fencing above ground level for sewage line inspection & line cleaning including removal of entire debris/ vegetation outside MoD land complete all as directed.

E&M Items : S&F 5 star rated Split Air conditioning unit Inverter type of capacity 2 TR consisting of outdoor unit with fan motor, hermetically sealed rotary type compressor with complete accessories and condensing unit of copper tubing complete duly connected with separately erected indoor unit with blower motor, plasma filter, inbuilt air ioniser, insulated copper tubings (suction line & liquid line) upto 5 metre suitable for 2 TR AC, PVC insulated and FR PVC round sheathed multistranded copper conductor flexible cable 2.5 sqmm 3 core 1100 Volts (ISI marked) upto 5 metre, including MS Stand duly powder coated painted, Gas charging, internal copper wiring, remote control complete including making opening in stone/ brick wall by cutting, drilling for placing ducts, pipes etc and making good the disturbed surfaces of wall as per its original specification including mounting brackets for wall/ stand to rest on slab etc, AC installed as per manufacturer’s instructions and testing on completion to entire satisfaction of Engineer-in-charge complete all as directed. Note : Cost of copper tubings & electric cable upto 5 metre length shall deemed to be included in quoted rate of this item. Copper tubings & electric cable required beyond 5 metre length shall be measured & paid for separately under relevant item of this Schedule.

S&F suitable size insulated copper tubings (suction line & liquid line) suitable for 2 TR capacity split AC all as per AC manufacturer’s recommendation complete all as specified and as directed. Note :- 01 run of suction line copper tube & 01 run of liquid line copper tube and insulation shall be measured as one run length for payment purpose.

S&F PVC insulated and FR PVC round sheathed, multistranded copper conductor flexible cable, 2.5 sqmm 3 core, 1100 Volts, ISI marked, for split AC, complete all as specified and as directed.

M&L for sub main wiring with two runs of 4 sqmm (nominal area) size main cable & one run of 4 sqmm size earth continuity conductor cable, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade (ISI marked) cables, drawn through & including suitable size of heavy duty PVC casing and capping double lock type (ISI marked) with accessories, fixed on wall/ceiling complete all as specified & as directed. Note :- 02 runs of 4 sqmm size main cable, 01 run of 4 sqmm size earth continuity conductor cable and casing and capping with accessories shall be measured as one run length for payment purpose.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete 240 V with one Single Pole MCB 20 Amps, 'C' Curve complete all as specified & as directed.

S&F Distribution Board (DB) sheet metal enclosure, VTPN, TPN, Vertical, 4 Way, flush mounted & surface mounting, suitable for fixing 3 Pole / 4 Pole MCCBs & MCBs, 415 Volts with 200 Amps rated bus bar, DB fitted with bus bar neutral links blank plates, fitted, complete all as specified and as directed. Make:- Legrand Cat No. 5077 50 or equivalent in makes mentioned in Appendix 'B' here-in-after. Note : (i) Cost of cutting/leaving forming chases for sinking for DB and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) DB & MCCB of same make shall be provided.

S&F MCCB, 4 Pole, 200 Amps, rupturing capacity 36 kA, 415 Volt grade, AC, 50 Hz, adjustable Thermal - Magnetic release type including electric connection & testing complete all as specified and as directed. Make: Legrand Cat Part No. 4202 48 or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F MCCB, 4 Pole, 160 Amps, rupturing capacity 36 kA, 415 Volt grade, AC, 50 Hz, adjustable Thermal - Magnetic release type including electric connection & testing complete all as specified and as directed. Make: Legrand Cat Part No. 4200 97 or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F MCB SP 6 to 32 Amp, 240 V, 50 Hz, AC supply, 10 kA, 'C' Curve, complete all as directed. Make: Legrand Cat No. 4085 87 to 4085 95 or equivalent in makes mentioned in Appendix 'B' here-in-after.

M&L for LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with copper stranded conductor 1100 Volt grade cross sectional area 50 sqmm 3.5 core (ISI marked) fixed on wall/ pole or laid in trenches/ floor etc complete all as specified & as directed.

Supply and laying/fixing 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 with all fittings, laid in trenches, under floors or roads/ along poles etc for protection of electric cables complete all as directed.

M&L for earthing complete with galvanized steel earth plate as electrode 600x600x6 mm buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected using galvanized iron earth lead wire 4 mm dia upto 7.5mtr as earthing lead by means of bolts, nuts, check nuts and washers of GI earth lead wire protected by Gl light grade pipe 15 mm bore, including provision of concrete pit of PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) with 40 mm thick cover of RCC 1:2:4 reinforced with 8 mm dia TMT bars reinforced at 100 mm C/C both ways and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 2 m long placed on top edge of earth plate, charcoal and common salt filling test point made out of 40x8 mm flange with fixing arrangement, funnel, wire mesh and earth work in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m all as per electrical Plate No. 3 of SSR Part I and connected to earth test point including testing on completion complete all as specified & as directed.

S&F 4mm dia galvanised iron or steel wire earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and as directed.

Supply, laying/fixing & jointing 15mm bore uPVC Pipes (Sch 40) Solvent Weld Pipe (Lead Free) including necessary fittings (Sch 40) such as bend, tee, elbow etc laid in trenches/duct or fixing on wall complete all as specified and as directed.

Supply, laying/fixing & jointing 40mm bore uPVC Pipes (Sch 40) Solvent Weld Pipe (Lead Free) including necessary fittings (Sch 40) such as bend, tee, elbow etc laid in trenches/duct or fixing on wall complete all as specified and as directed.

M&L for Canopy (hut type) made out of 2mm thick MS sheet with necessary cutting, made to shape, welding, etc as per requirement of canopy suitable for outdoor AC compressor unit with MS angle support structure all as directed with & including painting with two coats of 1st quality synthetic enamel paint of approved tint over a coat of red oxide zinc chrome primer after necessary preparation of surfaces complete all as specified and as directed. Notes :- (i) Size, section and shape of steel sections shall be as directed by Engineer-in-Charge. (ii) Weight of paint shall not be considered for payment purpose and quoted rate shall deemed to be included this aspect.

Pioneer Infrastructures

M/s Bombay Novelty Stores

M/s Rohit Construction Co.