SPECIAL REPAIR TO BLDG NO P 08 01 TO 04 QTRS BATHROOM BLDG NO A 10B PROVN OF INTERLOCKING PATHWAY HARD STANDING IN FRONT OF BLDG NO P 27 AND PROVN OF CHAIN LINK FENCING AROUND THE BUILDING NO A 6 AT ALHILAL MIL STN

Dismantling of plain or corrugated sheeting any gauge, thickness, including Nainital or similar pattern roof covering etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantling 40 sq cm & over in section , any position in unframed work complete all as specified and directed.

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde-250) quality-A complete all as specified and directed.

S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Dismantling of wall & ceiling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets of any thickness, including cover fillets.complete all as specified and directed.

S&F Providing and fixing tiled false ceiling of size 595 x 595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanised steel section (galvanized @ 120 gsm/sqm, both side inclusive) consisting of 3600mm long main 'T' runner size 24x38mm and 0.30mm thick,1200mm long cross 'T' of size 24 x 25mm and 0.30mm thick, 600mm secondary cross 'T' of size 24 x 25mm and 0.30mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main 'T' runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 8mm dia and 45mm long dashfasteners, 4mm GI adjustable rods with galvanised buttrtfly level clips of size 85x30x0.8mm spaced at max 1200mm centre to centre along main 'T' and not more than 150mm from spliced joints.The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall, then 1200mm long cross 'T' is interlocked between the main 'T' at 600mm center to center to form a grid of 1200x600mm and then secondary cross 'T' of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are,to be supported independently. Finally white coloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595mm having foil on backside & PVC paper on front side wrapped around edges to be placedin grid complete all as specified and directed.