PROVN OF 04 X BATH AND 04 X TOILET NEAR BLDG NO OW 57 PROVN OF 06 X TOILET AND BATH ATTACHED TO SINGLE LIVING JCOs ACCN AND SPL REPAIR TO BATH AND TOILET BLDG NO P04 MH COMMUNICATION COMPLEX AND P 03 MH OR LIVING AREA AT ALHILAL MIL STN

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.

Excavation in trenches,nexc 1.50m wide and n exc 1.50m in depth for foundation,etc or for shafts,wells,cesspits,manholes,pier holes,etc n exc 10 sq m on plan and getting out any type of soil complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

M&L walling of random rubble, un-coursed, well bonded bedded & solidly hearted built in cement mortar 1:6, complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Rendering 10mm thick plaster on stone masonry or than fair faces of brick wall in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper, white or tinted complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/footpath finished even and smooth without using extra cement complete all as specified and directed.

M&L joint free coloured glazed ceramic tiles in vertical surfaces350x450x7mm,450 x 300x 7mm/ 600 x 300 x 7mm as in skirting/dado etc, over and including 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring & roof complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. complete all as specified and directed.

M&L RCC 1:2:4 nominal mix type B1 using 20mm graded crushed stone aggregate as in plinth beams, lintel beam, roof beam, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.

S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21 complete all as specified and directed.

S&F 200 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars dove tailed or welded complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F vitreous china wash down Europian water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing complete all as specified and directed.

S&F plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed.

S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed.

S&F Vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm size with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends complete all as specified and directed.

S&F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified & directed.

S&F soap dish vitreous china white,approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms) complete all as specified and directed.

S&F fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.

S&F swivel shower of PTMT any colour for fixing with shower arms 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minium eight 40gms) complete all as specified and directed.

S&F stop valve/angle valve, fancy type, chromiun plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

S&F stop cock, fancy type with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

S&F 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI tubing complete all as specified and directed.

S&F 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI tubing complete all as specified and directed.

S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

S&F steel water tubing, 25 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 290 (Grade E-165) complete all as specified and directed.

S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills, gratings,etc,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge.

Excavation post holes (or similar holes) in any type of soil each n exc 0.50 cu.m,getting out,returning,filling on and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm, complete all as specified and directed.

M&L preparation of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L 30cm x 30 cm x 25mm thick, coloured rubber moulded chequered cement concrete tiles with grey cement and pigment set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc25 cm any type of soil complete all as specified and directed.

Excavation over areas not exc 1.5m deep and getting out in any type of soil complete all as specified and directed.

Excavation over area exc 1.5m but not exc 3m deep getting out in any type of soil complete all as specified and directed.

Excavation over area exc 3.0m but not exc 4.5m deep getting out in any type of soil complete all as specified and directed.

M&L 150mm thick hardcore of guage not exc 63mm, deposited spread and levelled in layers not exc 15mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L 200mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring of septic tank complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones(fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

M&L 50mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate for septic tank finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:4, complete all as specified and directed.

Rendering 20mm thick plaster on internal surfaces of wall for septic tank in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L RCC 1:2:4 nominal mix type B1 using 20mm graded crushed stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L 150mm dia sail-glazed stoneware drain/sewage pipes laid in trenches and jointed complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) bed to drain pipes including packing under and complete surrounding pipes with concrete after they are laid and tested in trenches for 150 mm bore reinforced concrete pipes, class NP2complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to walls/laid in trenches or in floors, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction, (double T) equal or unequal with oval access door ,complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, (double T) equal or unequal with oval access door ,complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor/Nahani trap, plaint with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore dia, complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore dia, complete all as specified and directed.

M&L broken bricks for loose filling of gauge 80mm to 150mm graded in soakage pits, soakage well, complete all as specified and directed.

S&F brick, sub class B, laid flat in floors, old size brick in CM 1:4 complete all as specified and directed.

S&F brick, sub class B, laid flat in floors, old size brick in CM 1:6 complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Removing excavated soil not exc. 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L preparing of newly plastered surface of walls and applying two coats of white wash complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate for septic tank finished the surface even and smooth using extra cement complete all as specified and directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L 6mm thick E-board (classic)false ceiling of size 600x600 mm fixed to aluminium snap grid false ceiling complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Rendering 5mm thick on ceiling in CM 1:3 finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparing of newly plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls, priming plastered and other surface with alkali resistent priming paint and applying two coats of cement base paint complete all as specified and directed.

M&L preparing newly plastered surface of ceiling and applying three coats of white wash complete all as as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.50 sq.m in each pane, complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 200 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in sub base of flooring, leveling course of flooring or levelling course of roof etc, complete all as specified and directed.

M&L glazed ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc. and including 10mm plaster in CM 1:4 complete all as specified and directed.

Dismantling 75/100mm dia cast/PVC drain pipe, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directedd.

S&F 75mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F vitreous China squatting pan orissa pattern size 580mm x 440mm white with integral foot rest (including making good the disturbed portion as per surrounding areas excluding flushing cistern and flush pipe) including PVS (SWR) 'S'trap, provn of lime concrete and jointing to flush pipe all as specified.

S&F in repair vitreous china wash down Europian water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing complete all as specified and directed.

S&F PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed.

S&F Vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm size with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repairs) complete all as specified and directed.

S&F in repair vitreous china half stall urinal complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal including water spider to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repairs aluminium anodised tubular towel rail, 20mm dia, D type 60cm long , fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and directed.

S&F in repairs fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.

S&F in repairs stop valve/angle valve, fancy type, chromiun plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

S&F in repair stop cock, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed..

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed

Taking up or down 25mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed

Cutting chase, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing,steps, cills, sunshades, shelves,lintels,etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting exc. 10cm but not exc. 20 cm girth complete all as specified and directed.

M&L preparing the surface of roof slab by brushing with wire brashes for removal of loose materials etc and sweeping with brooms, gunny bags and finally remove dust by compressed air by compressor complete all as specified and directed.

M&L applying neat cement slurry with 3Kg of cement slurry per sq.m mixed with liquid water proofing compound on surfaces of roof and plastering 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instructions and finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L one coat of cold bituminous primer to the plastered surface @ 0.40 litres per sqm conforming IS-3384 and laid a layer of APP polymeric membrane 3mm thick (minimum) weighing 3.0 kg per sqm reinforced with polyster non woven fabric (weight not less than 150gm/sqm) by toarch application method complete all as per manufacturer instructions and sealing all the over lap shall be minimum 75mm in length side and 100mm on with side. complete all as specified and as directed.

M&L 40mm thick plain cement concrete, M-15 (Nominal Mix), type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregates) as in roof kerbs, mud stops, roof padding over APP etc using water proofing compound, complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L plain cement concrete,1:3:6 type C-1 (using 40mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured)

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330m x 160mm complete all as specified and directed.

Providing and fixing tiled false ceiling of size 595x595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanized steel section (galvanized @ 120 gms/sqm, both side inclusive) consisting of 3600mm long main "T" runner size 24x38mm and 0.30mm thick, 1200mm long cross "T" of size 24x25mm and 0.30mm thick, 600mm secondary cross "T" of size 24x25mm and 0.30mm thick and PPGI wall angle of size 24x24mm and 0.4mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main "T" runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasterners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8mm spaced at max 1200mm center to center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent = wall, then 1200mm long cross "T" is interlocked between the main "T" at 600mm center to center to form a grid of 1200x600mm and then secondary cross "T" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally whitecoloured Gyproc 9mm thick Dew Drop/Granular tiles of size 595x595 having foil on back side & PVC paper on front side wrapped around edges to be placed in grid complete all as specified and directed.

Dismantling of old rusted plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

Taking down carefully existing aluminium / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down unsv sheet metal box & MCB DB SPN with MCB's of any make/capacity complete all as specified and directed.

M&L concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694: 2010 having multi stranded copper conductor 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No.) drawn in and including concealed non metallic rigid PVC conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting and fixing accessories and 1.5 sqmm FRLSH PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc eith and including 2.8mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete fo the following:-

One light point controlled by one switch

One Exhaust fan point controlled by one switch

One 5 pin multipurpose socket outlet 5/6 amps on the same board with other switch.

One 3 pin socket oulet 5 amp controlled by one switch on independent board.

Description all as per item No. 130 here in before but point wiring with 2.5 Sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 amps controlled by one switch on independent board and 2.5 Sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F switch piano, flush button single pole one way 5/6 Amp complete as specified and directed

S&F switch piano, flush button single pole one way 15 Amp complete as specified and directed

S&F socket outlet, multipurpose, 2 in 1, 5 pin, 5/6 Amp complete all as specified and directed

S& F socket outlet multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.

S& F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S& F Lamp holder with metal ring, PVC/ Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and directed.

S& F LED Bulb 09/10 watt with provision of fixed in lamp holder complete all as specified and directed.

S& F LED 'T' type mirror light fitting 09/10 watt with provision of fixed in lamp hpolder complete all as specified and directed.

S& F decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviromental friendly energy efficient ready to use, 20 watt, 6500K fitting, including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core coppor conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S& F security light fitting better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 X 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washer grouted in wall complete including reqd lingth of 1.5sqmm PVC multistranded BIS marded, 03 cpre copper conductor for connection rom ceiling rose to lilght fittings incl testing on completion all as specified and directed.

S&F 250mm sweep exhaust fan made of sturdy engineering plastic complete with lorvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding complete all as specified and directed.d.

S&F exhaust fan, steel body double bearing AC single phase 230 V of size 300mm sweep with, blades and frame and louvers, energy saving including cutting of wall complete all as specified and directed.

S&F electric water heater, storage type metallic outer body and stainless steel inner container, 25 ltr capacity, electric suitable for single phase, 50 Hz, AC supply, 5 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 Sqmm twisted copper conductor cable PVC sheathed, three pin plug top complete with necessary fittings and fixtures complete all as specified and directed.

S&F electric water heater, storage type metallic outer body and stainless steel inner container, 50 ltr capacity, electric suitable for single phase, 50 Hz, AC supply, 5 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 Sqmm twisted copper conductor cable PVC sheathed, three pin plug top complete with necessary fittings and fixtures complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multistranded copper conductor (ISI marked with valid CML No) cable 1100 volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia confirming to IS 14930 (Part-I) 2001,with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (Note: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any discription for concealing the conduits to required deapth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 63 Amp, 4 pole & including MCCB 63 amps 4 pole 16 KA complete (when MCB's are to be used) with suitable size of busbar complete fixed flush in wall including chases wall for fixing DB and making good the disturbed wall surfaces to match with existing specification including taking down all as specified and directed.

S&F MCB SP 240 volts, 10 to 32 amps, 'C' series 16 KA including connection with suitable size copper lugs complete all as specified and directed.

S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20 amps, 240 volts, 10 KA complete all as specified and directed.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F MCB SPN ‘C’ curve, 16KA, 240V, 63 amps, including connection with suitable copper lugs complete all as specified and directed.

S&F MCB SP 240 volts 6 to 32 amps, 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

Supplying, laying and testing cable XLPE insulated screened PVC bedded galvanised strip or wire armoured electric power cables (heavy duty) 1100 volt grade with stranded aluminium conductor of size 16 Sqmm, 4 core flat cable complete all as specified and directed.

Supplying, laying and testing cable XLPE insulated screened PVC bedded galvanised strip or wire armoured electric power cables (heavy duty) 1100 volt grade with stranded aluminium conductor of size 10 Sqmm, 2 core flat cable complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for laying of underground cables, errection of poles, struts / stays etc including taking out cable cover or stone slab, not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed.

M&L sand cushioning to undergound cable with using a layer of sand 8cm before laying the cable and 15cm after laying the cable (10cm punned thickness above the top of the upper most cable, total 18cm), complete all as specified and directed.

M&L old size brick class "B" as in cable protection laid dry,flat,transversally along the length of cable on sand cushioning with width equalto length of the brick complete all as specified and as directed.

S&F 40mm bore galvanised iron, light grade (ISI marked) laid in trenches / fixed on wall / poles etc for protection of cable, including taking out old tubing complete all as specified and as directed.

S&F tube medium grade galvanised with all fittings laid in trenches of 25mm dia complete all as specified and directed.

S&F tube medium grade galvanised with all fittings laid in trenches of 40mm dia complete all as specified and directed.

S&F tube medium grade galvanised with all fittings fixed to wall/floor of 20mm dia complete all as specified and directed.

S&F 40mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI tubing complete all as specified and directed.

Drilling and tapping existing cast iron pipes in position, for branch connection of internal dia 20mm & fixed with 40mm dia GI pipe complete all as specified and directed.

M&L construction of valve chambes with 150mm thick PCC foundation 1:4:8 type D2 using 40mm graded trap stone aggregate, 230mm thick brick masonry wall with sub class 'B' bricks built in CM 1:4, 10mm thick plastering to brick masonry in cement mortar internally and externally upto 15cm below ground level, 50mm thick coping with PCC 1:2:4 type B1 using 20mm graded crushed trap stone aggregate valve chamber frame cover made of mild steel angles of size 40mm x 40mm x 6mm and cover made of 2.5mm thick mild steel sheet fixed with mild steel hinges- 02 Nos, locking arrangements with provision of locks and painting the steel surfaces with two coats of synthetic enamelled paint over a coat of zinc chromate primer including necessary earth work, excavation, complete all as specified and directed of size 0.9 x 0.9 x 0.9m internal dimensions.

Fixing only electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed.

Fixing only exhaust fan (M.D. supply) and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connecting to GI earth wire of size 4mm size by means of bolts, nuts, check nuts and protected by provision of GI medium grade pipe of 15mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no less than 4Kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm dia pipe for watering of suitable length placed on tp edge of earth plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m complete all as per plate No. 3 of SSR 2009 Part-I and connecting to earth test point all as specified and directed by Engineer-in-Charge and including testing on completion.

Note:-(i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B1, 80mm thick reinforcement with 8mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50m and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includese in the unit rate of item. (iv) The earth chamber shall be constructed 5m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate for this item.

VIVEKA ENTERPRISES (BID ID -3157850)