CERTAIN REPAIRS TO KERB STONES PATH ROAD BERMS BOUNDARY WALLS WATCH TOWERS ETC UNDER AGE BR II MAINT AT INA EZHIMALA

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for hardcore of gauge n exc.63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded aggregate) 100mm thick as in sub base complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-1, (using 20mm graded granite stone aggregate) as in hard standing and make impressions while concrete is green complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 ( using 40 mm graded aggregate) 75 mm thick as in plinth protection/ hard standing complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B- 1 (using 20mm graded stone aggregate) as in road berms and finishing top surface even and rough complete all as specified and as directed.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound Grade 'A' including necessary formwork etc complete all as specified and as directed.

M&L for providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, kerbs etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match,type C1, 1:3:6 using 20 mm graded aggregate exc. 10 cm in width and setting in mortar 1:6 complete all as specified and as directed.

M&L for providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in mortar complete with joints to match,type B1, 1:2:4 using 20 mm graded aggregate exc. 10 cm in width and setting in mortar 1:4 complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Demolition of brick work, PCC block or stone masonry built in cement mortar complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks type B1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 complete all as specified and as directed.

M&L for laterite stone walling of regular coursed , well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

M&L for walling of squared rubble, regular coursed, well bonded, bedded & solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M&L for laterite stone pitching of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete in road side berms etc all as specified and as directed.

Taking down of cement plaster of any description or thickness / chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster complete all as specified and as directed.

Raking out joints/ pointing to squared rubble masonry, coursed or uncoursed in cement or cement lime mortar complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement mixed with liquid water proofing compound (Work in foul condition and in shaft) complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured & paid separately.

M&L for rendering on fair faces of brick work or concrete surfaces 10mm thick in cement mortar 1:4 on internal surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on stone masonry external surfaces in cement mortar 1:4 and finish the surface even and smooth complete all as specified and as directed.

M&L for rendering 10 mm thick on stone masonry internal surfaces in cement mortar 1:6 and finish the surface even and smooth (without using extra cement) complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in ceilings using cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound of approved quality complete all as specified and as directed.

M&L for struck pointing to squared rubble, coursed or uncoursed masonry in cement mortar 1:3 complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of santex matt over a coat of primer on wall as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge.

M&L for preperation of new plastered surface and applying two coats of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer complete all as specified and as per manufacturer's instructions.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on surfaces of compound wall/parapet wall/ kerb stone etc. complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. (inner girth only measured) complete all as specified and as directed.

M&L for 75mm thick moorum filling as in berms including spreading , levelling, watering and well ramming and rolling with 8 to 10 power road roller / with vibratory roller HD 99 VV or equivalent roller to required gradient and camber complete all as specified and as directed.

Dismantling of structural steel work/aluminium work including doors etc complete all as specified and as directed.

S&F steel work in tubular trusses (tubular, angle, square and rectangular etc ) including shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and as directed.

S&F tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe- 290 Gde-E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F in repairs pillar taps 15 mm size, cast copper alloy, chromium plated screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed.

S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated bib taps (fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed.

S&F in repair brass chromium plated towel ring complete all as specified and as directed.

S&F in repair chromium plated soap tray fixed with CP brass screws complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated waste coupling with long shank, half thread, 32 mm dia, for WHB etc. complete all as specified and as directed.

S&F in repair aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and as directed.

S&F 15/20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Taking up or down steel tubing and connections 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections 20mm dia complete all as specified and as directed.

S&F in repairs 32mm dia PVC flexible waste pipe for urinals/WHB/ sink complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

p a hameed

PADMANABHAN. K.V

LAKSHMI BUILDERS

Palace constructions

GMS Builders