Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAdmitted-Finance | ₹2.4 L | L1 | Admitted-Finance |
| 2 | L2₹2.8 L+₹42,546 (18.0%)Admitted-Finance | ₹2.8 L+₹42,546 (18.0%) | L2 | Admitted-Finance |
| 3 | L3₹3.0 L+₹65,096 (27.5%)Admitted-Finance 112 21 A 2 K N MUKHERJEE ROAD P O TALPUKUR BARRACKPORE 24 PGS N | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | ₹3.0 L+₹65,096 (27.5%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | MIK ENTERPRISES L3 | SRISTI AQUA SOLUTIONS L1 | S. P. ENTERPRISES L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supplying including cost of installation of cast iron Dismantling joint Double Flanged Flexible Short piece with collapsible arrangement, flangedface drilled to IS: 1538-93 table 4 & 6, flat face conforming to IS: 210-85,GR 150 FG complete with sealing rubber gasket made of EPDM quality with ISI mark to 5382-1985, type 4, cast iron follower gland and mild steel fastener with zinc coating. The whole assembly is to be mechanically and hydraulically tested to provision in IS: 1533.93. Fitting and fixing
should be in proper position with proper care of main pipe line for leak proof condition. Diameter in mm with minimum barrel pipe length in mm. 750mm with length 315 to 490mm. | 2 | Each | 1,40,500 ₹2,81,000 | 1,10,700 ₹2,21,400 Lowest | 1,30,200 ₹2,60,400 |
| 2.00 | Painting hoist structural components, tressle bridge ,crane, lifting beam, cat work bridge and other similar structure on prepared surfaces with two coats of zinc phosphate primer (airless spray preferred) 40 microns/coat and followed by two coats of synthetic enamel paint 25 microns/coat including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. | 12 | SqM | 650 ₹7,800 | 382 ₹4,584 Lowest | 540 ₹6,480 |
| 3.00 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m | 0.15 | MT | 86,200 ₹12,930 | 71,000 ₹10,650 Lowest | 82,000 ₹12,300 |
Tender Value
Refer Docs
EMD Value
₹4,800
Closing Date
19 Jun 2026, 1:00 pmClosed
Executive Engineer, GAP-II, EM, KMDA
OFFICE OF THE EXECUTIVE ENGINEER (E/M)/GAP-II 1/425, Gariahat Road(s), Kol-68
Supply, delivery, installation and commissioning of 750mm dia Dismantling joint (CI, double flanged) at delivery line along with other allied works at Maheshtala Booster Pumping Station under Maheshtala Municipality.
2026_KMDA_1025639_1
EE(E/M)/GAP-II/ KMDA/2W-17/2025-26/03 Date -26.05.2026
Open Tender
Electrical Work/ Equipment
Item Rate
10 days
Maheshtala Municipality.
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹4,800
Office of the Executive Engineer, GAP-II, EM, KMDA
24 Jun 2026
10 Jun 2026
22 Jun 2026
10 Jun 2026
19 Jun 2026
10 Jun 2026
15 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying including cost of installation of cast iron Dismantling joint Double Flanged Flexible Short piece with collapsible arrangement, flangedface drilled to IS: 1538-93 table 4 & 6, flat face conforming to IS: 210-85,GR 150 FG complete with sealing rubber gasket made of EPDM quality with ISI mark to 5382-1985, type 4, cast iron follower gland and mild steel fastener with zinc coating. The whole assembly is to be mechanically and hydraulically tested to provision in IS: 1533.93. Fitting and fixing
should be in proper position with proper care of main pipe line for leak proof condition. Diameter in mm with minimum barrel pipe length in mm. 750mm with length 315 to 490mm. | - | Each | - | - |
| 2 | Painting hoist structural components, tressle bridge ,crane, lifting beam, cat work bridge and other similar structure on prepared surfaces with two coats of zinc phosphate primer (airless spray preferred) 40 microns/coat and followed by two coats of synthetic enamel paint 25 microns/coat including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. | - | SqM | - | - |
| 3 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m | - | MT | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
BOQ_2520196.xls
BOQ • 0.32 MB
Form.pdf
Tender Documents • 0.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .