SPL REPAIR TO BLDG NO P 02 P 07 AND P 08 AT CHAUBATTIA MIL STN UNDER GE RANIKHET

Amount

BOQ/Sch 'A' B/R portion Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, all as specified & directed by Engr-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

M & L 15mm thick screed bed in cement mortar 1:6 under floor tiles, all as specified and directed

M&L for 75mm thick plan cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base to flooring, complete all as specified & directed by Engr-in-charge.

M&L for Ceramic tiles exterior grade 300 x 300 x 10mm, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface of size 450x600x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 etc.

Dismantling laid dry or laid dry and pointed Stone slabs and tiles of any description or thickness in floors, aprons etc.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S&F for powder coated aluminium anodised snap grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2mm dia GI wire comprising of the Main Tee 28x24x3mm thick, Cross Tee 28x24x3mm thick and Wall angle 24x24x3mm thick sections complete all as specified and directed.

S&F 4 mm thick Everest designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on GI/Aluminium snap grid as in ceiling.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) Complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement Complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m

M&L for rendering 15 mm thick readymade plaster on inner/outer walls with Ultra Tech READIPLAST by adding 17-19% of potable water by weight of material. for thickness above 15mm, it is recommended to be applied in multiple layers. Ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 days- 10-12 Mpa/Bulk density-1500-1600 kg/cum. Note : The rate quoted by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 10 mtr height, all as specified and directed.

M&L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of primer(Priming the plastered and other surface preparatory to distempering) complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6)

M & L Precast cement concrete block masonry with solid blocks PCC Type C1 (1:3:6) (using 20mm graded aggregate) exc 10cm in width and setting in CM 1:6

Taking down window chowkhats or frames area n. exc 1.5 Sqm each with shutter (without taking off shutter from frame) as directed.

Taking down chowkhats or frames area exc 1.5 Sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) as directed.

S&F Pressed steel door frame for doors made out of 1.2 mm thick sheet with one or more rebates incl necessary fixing lugs , hinges ,lock strike plate , etc size 165x60 mm, all as specified and directed.

M & L for providing cement concrete Type C1 (1:3:6) 20 mm graded in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, filling hollow of frame with plain cement concrete as directed

S&F 35 mm thick Glazed and skeleton shutters 2nd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S & F Plain, framed, panelled shutters 35 mm thick in 2nd class hard wood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S & F in repairs, Aluminum die cast body door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete.

M & L for preparation of new or previously untreated wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer.

M&L for Powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing including stainless steel tubes of any size in grills as per directions of Engr-in-charge, complete all as specified.

S & F Aluminium window and ventilator shutters with powder coating of any colour (Thickness or powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified etc. complete all as specified

S & F 5.50mm thick Sheet glass black colour, ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane

S&F in repair, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

S & F 150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .

S & F 100mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .

S & F butt hinges, medium weight, stainless steel and fixed, size of hinges 100mm complete all as specified and directed.

S & F 150mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.

S & F 100mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.

S & F 300 mm long (Length of bolt) mild steel sliding door bolts plate type stove enamelled blackwith bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts four on bolt plate and two on staple plate complete all specified and directed.

S&F in repair, Vitreous china wash basin pedestal type, white, flat back, size 550x400 mm excluding taps, chain and plug and porcelain stopper but including CP waste coupling & brackets and fixed complete all as specified and directed. Make : Jaquar cat part No : - COP-001BPM or CERA cat part no-1067A or equivalent in Hindware .

S & F in repairs 15 mm bore Brass CP WHB mixer/ wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F in repairs, 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

M&L for applying Pitch free PU based Liquid applied single component elastomeric seamless, water and vapour proof membrane system Nitoproof 600F for concrete @ 2.50kg/Sqm (02 coats) over 15mm thick plastering in CM 1:4 for roof treatment portion only including taking down of existing roof treatment. Typical applications will include roofs, podium, balconies, floor slabs, suspended floors, patios, bathrooms and toilets, inspection pits, swimming pools, bridge decks, confirming Tensile strength (2N/mm2) (ASTM D412)/Tear resistance (15KN/m) (ASTM D624-00 and Crack bridging (ASTM C836/ASTM C1305 modified) 2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water. Make : Fosroc/Sika/CICO/Asian paints or equivalent . All above operations to be done in the presence and supervision of auth applicator in order.

S&F in Repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs of 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.

S&F in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long complete all as directed.

S&F in repair, PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as directed.

S&F in repair, 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with 20mm bore dia ball vallves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, (Minimum weight 15mm-142gms /20 mm- 210 gms/ 25mm-455gms/ 40mm - 690 gms) , all as specified in SSR Part-I, complete including dismantling of existing tank.

S&F in repairs Gun Metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as directed.

Dismantling boarding, any description, fixed in any position with screws

M & L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps

M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping, for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsMild steel bars, complete all as specified.

M&L for repair of ceiling of building by using polymer modified mortar as per below : - (a) Chipping of ceiling / slab / columns / beams / chajjas /parapet / roof projection / balcony / staircase and removing loose mortar with chisel hammer without much impact on concrete surface (b) Applying rust remover in two coats over rusted reinforcement and leave it for 24 hours than clean by wire/ rotary brush then application of anticorrosive coating on same reinforcement by two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 6-8 sqmtr/ltr not less than 50 microns dft with as per manufacturer’s instructions (c) Then, application of SBR based bonding agent in conjunction with cement in two layers. The second layer should be green or tacky at the time of placing single component, fiber reinforced, dual shrinkage-compensated thixotropic, cementitious ptch repair mortar Renderoc in at least 20-25mm thick in layer initially by hand or finishing with troweled carefuly. (d) Note : The rate quoted b contractor shall include cleaning of surface application as per instructions and scaffolding and probs for support and providing steel bars by anchoring from anchor grout as specified and directed (e) Required steel for rebaing shall paid separately. Make : Equivalent of Fosroc/Sika/Choksey etc

M&L PCC ( 1:2:4) type B-1 (using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work as required, complete all as specified and directed.

M & L for PCC ( 1:3:6) type C-2, using 40mm graded stone aggregate in Cement concrete in surface channels and drains

Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed. concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

S & F Welded steel wire fabric 50 x 50mm, supplied and fixed complete to wood or steel members n. exc 4 Kg per sqm in repairs, all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of red oxide primer etc,complete all as spd and directed.

S&F in replacment 8mm thick, wooden pieces, machine presured one side laminated and other side balancing green, as in parquet flooring with and including necessary padding as soft wool graded type as required at site, fixed with adhesive as per manufacturer's instructions including taking down old wooden flooring with or without plywood complete all as specified and directed.

M&L for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed as in repair of any thickness complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately.

S & F three track powder coated aluminium window with three sliding shutters, the size of outer frame three track 100 x 37x1.50mm (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37 x 18x 12mm and glazing with 5mm thick black glass of poly carbone including all round suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement. Each sliding window shall be provided with one number handle including locking arrangement and 02 numbers of sliding rollers of nylon with necessary fittings.

S & F in repairs, Cabinet mirror plastic premium multipurpose wall mounted storage cabinet with mirror, prime look (white) of size 30.8c x 49.5cm

M&L 18mm thick UV coating, MDF board exterior grade, both side laminated with any colour antifungal, moisture resistance, anti borer as per IS 14587 for kitchen/cupboards, shelfs fixing with first class hard wood lipping / beading etc complete all as specified and directed. Make;- Action Tessa/ Green Ply/ Century.

S & F in repair, Single Piece-WC with PP soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 360x640x685 mm, P Trap-180 mm, Code : SLS-WHT-6851P180PP of Jaquar or equivlent in PRAYAG/CERA.

S & F in repair, Bathroom Towel Rack Shelves - Premium SUS304 Stainless Steel of size 19.69"L x 8.46"W x 6.22"H (50 x 21.5 x 15.8 cm) , Rustproof with Double Bar & 5 Hooks, wall mounted and rectangular in shape, complete all as specified.

S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair Jet spray triangle nozzle with tube, 600mm of 304 grade stainless steel with glossy finish, all as specified and directed

M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 etc.

M&L for Anti skid floor tiles 10-12mm thick square of size 400x400mm set and jointed in neat cement slurry and pointed in white or coloured cement to match to match with the colour of tiles laid on, as specified.

M&L for preparing of old plastered wall surfaces including complete removal of existing treatment and applying two coat of distemper oil emulsion over a coat of primer(Priming the plastered and other surface preparatory to distempering) complete all as specified and directed.

S&F in repairs, Stainless steel wall mounted Plate rack of size 780x760x240mm, thickness of sheet not less than 1.00mm and weight not less than 7.50Kg of approved design/pattern (as approved by Engr-in-Charge with provision for keeping plate and other crockery, fixed with screw and rawl plugs etc on wall , complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows, reducers, union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in Stone, concrete block or slab walls, complete all as specified and directed.

BOQ/Sch 'A' E/M portion Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface.

M & L point wiring for modular fittings for one light point/ fan/bell/ 5Amps socket out let (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FR-LSH) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) including modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed one light/one fan/one bell point controlled by one modular switch.

All as per item No.83 herein before but One modular socket outlet 3 pin 6 amps controlled by one switch on same board.

All as per item No.83 herein before but One modular socket outlet 3 pin 6 amps controlled by one switch on independent board.

All as per item No 83 herein before but wiring with 2.5 sqmm copper wire (FR-LSH) PVC and 2.5 sqmm earth wire for modular socket outlet 5 pin 16 amps on independent board.

Supply and fix modular type switch single pole, one way 6 Amp complete all as specified and directed.

Supply and fix socket out let multi 5 pin, 6 Amps, modular type complete all as specified and directed.

Supply and fix switch modular type single pole, one way 16 Amp complete all as specified and directed.

Supply and fix socket out let 2 in1,3 pin, 6 and 16 Amp, modular type complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed.

S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fix High quality LED T8 indoor batten tube light 20 Watt with aluminium extrusion in D shaped have large diameter for increased convection heat transfer incl one LED PC tube rod and driver, internaly pre wired of 1.5 sqmm twin twisted flexible cable all as specified & directed. NOTE: The contractor must submit 5 years warranty for LED fitiings.

Taking down unservicable MCB and S&F MCB SP, 240 volts,AC C curve, 10 KA 6 to 32 Amps .

Taking down unservicable MCB and S&F MCB SPN , 240 volts,AC B curve, 10 KA 40 Amps.

Taking down unservicable MCB and S&F MCB DP , 240 volts,AC C curve, 10 KA 40 Amps.

Taking down unserviceable MCB S & F MCB TPN , 415 volts, AC C curve, 10 KA 100 Amps.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete. all as specified and directed .NOTE : The contractor must submit 5 years warranty for LED fittings

Taking down unservicable DB and S&F sheet metal enclusure for DBs(double door type) single pole and neutral 8 way including blanking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F sheet metal enclusure for DBs(double door type) Triple pole and neutral 4way including blacking platge as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed .

S & F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings

S&F Exhaust fan metallic bady ISI mark, 300 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

S&F Exhaust fan metallic bady ISI mark, 450 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 450 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

S & F Recess mounting LED luminaire 600mm x 600 mm ,36 W, 220v, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fitiings.

Taking out old U/S Sub main wiring for replacement including S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 6.0 Sqmm copper conductor PVC complete all as specified and directed (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

S& F LED Bulb of 9 watt as specified .NOTE: The contractor must submit 5 years warranty for LED fittings

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sq mm 4 core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of underground cable and getting out in any type of soil complete all as directed by the Engineer-in-Charge

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cms. thick in soft / loose soil complete all as specified and directed by Engr -in -charge .

Removal of surplus soil not exceeding 50 Mtr and depositing where directs at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified

M&L for laying of bricks well burnt sub class ‘B’ (old pattern) laid flat for cable protection width equal to the lengrth of brick complete all as specified .

M & L galvanised steel water tubing 'light grade' 50 mm bore with all fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed .

KUMAON VALLEY CONSTRUCTION (BID ID -3332809)

M/S S R Construction (BID ID -3333500)

NK CONSTRUCTION (BID ID -3340975)