Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹35.9 LAccepted-AOC | ₹35.9 L | L-1 | Accepted-AOC Accepted as being L-1 and acceptable rate |
| 2 | L-2₹51.1 L+₹15.2 L (42.3%)Rejected-AOC | ₹51.1 L+₹15.2 L (42.3%) | L-2 | Rejected-AOC Rejected as being L-2 bidder |
| 3 | Rejected-Technical | - | - | Rejected-Technical Rejected as technically disqualified |
| 4 | Rejected-Technical MISSION HOSPITAL CHOWK KEDARPUR AMBIKAPUR DIST SURGUJA CG 497001 | SURGUJA | CHHATTISGARH | 497001 | - | - | Rejected-Technical Rejected as technically disqualified |
Tender Value
₹65.9 L
EMD Value
₹82,425
Closing Date
11 Jun 2022, 5:00 pmClosed
GM/STAFF OFFICER ENM SECL HASDEO AREA
OFFICE OF THE AREA GENERAL MANAGER, HASDEO AREA PO South Jhagrakhand Colliery, Distt Korea (CG) Pin 497448
1. Supply, installation of LT 440V PCC panel 11/3.3kv/440v substation of CHM. 2. for AHQ, 3.Annual electrical maintenance work of Service buildings AGM Office, HSD House, Neelkamal guest house, S/JKD Dispensary, Canteen, Vrindavan etc.
2022_SECL_244608_1
AGM/HSD/SO(EnM)/E-Tender/07, Dtd.27.05.2022
Open Tender
Electrical and Maintenance Works
Item Rate
730 days
HASDEO AREA
Please refer Tender documents.
7 documents required · 7 mandatory
₹82,425
16 Nov 2022
27 May 2022
13 Jun 2022
28 May 2022
11 Jun 2022
28 May 2022
28 May 2022 - 4 Jun 2022
Amount
Item Description/ Heading
Supplying of LT PCC Panel (PCB Panel - I)
Supplying of LT PCC Panel (PCB Panel - II)
Installation of panel PCB - I & II i/c transportation, disconnection from old board to new board and cable connection with required lugs, nut, bolt & washers etc. complete as required.
Supplying of LT PCC Panel (PCB Panel - I)
Supplying of LT PCC Panel (PCB Panel - II)
Installation of panel PCB - I & II i/c transportation, disconnection from old board to new board and cable connection with required lugs, nut, bolt & washers etc. complete as required.
Suppyling of ISI Marked Switch Fuse Unit (rewirable type) triple pole with neutral link ,415 Volt having conduit / cable gland entry with two earthing terminals confirming to IS : 13947(Part I & III) . (63Amp TPN)
Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor (2core x 6sq.mm Unarm.)
Supplying & fixing of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :- (6-32Amp SP)
Supplying & fixing of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :- (40Amp DP)
Supply & fixing of approved make powder coated sheet steel encloser SPN MCB DB inclusive of Bus bar, Neutral bar, Earth bar & two earth terminals etc. complete as per IS:13032( exclusive of MCB & isolator ) (8Way)
Supplying & fixing of approved make Industrial type metal plug & socket DBs (without MCB) SPN sheet encloser (dust protected ) inclusive of 2 pole and earth metal plug and socket and space to incorporate SP MCB complete as per specification as required. (20Amp)
Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5 Sq. mm. PVC insulated cable FR withcopper multi strand conductor ISI marked in Surface rigid P.V.C. CASING AND CAPPING ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping etc. as required as per specification for :- (light/fan) (medium point)
Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5 Sq. mm. PVC insulated cable FR withcopper multi strand conductor ISI marked in Surface rigid P.V.C. CASING AND CAPPING ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping etc. as required as per specification for :- (3 Pin 6 Amp socket outlet on Separate Board) (short point)
Wiring for sub main/circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C. CASING AND CAPPING of ISI marked suitable size etc. as required as per specification (2x2.5sq.mm.)
Wiring for sub main/circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C. CASING AND CAPPING of ISI marked suitable size etc. as required as per specification (2x4sq.mm.)
Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq.mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C.CASING AND CAPPING ISI Marked of suitable size etc. with 16 Amp. F.T. Switch & Socket/ S.S Combined 6/16 Amp. of ISI Marked and 4 Sq.mm. PVC insulated copper earth continuity conductor of green colour inside capping as per specification for :-(on seperate board) (medium point)
Point wiring (excluding metallic switch box & sheet ) for A.C. Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C, Conduit (MMS) ISI Marked of suitable size etc. with 16 Amp. F.T. Switch & Socket /S.S.Combined 6/16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for (without A.C. box) (long point)
Supplying and fixing as per specification Call bell / buzzer of approved make with necessary materials complete. (Electric/Musical Call Bell)
Supplying,Fixing and Testing of MPP condensor 440 Volt Single Phase of approved make as required as per specification (3.15mfd)
Supplying,Fixing and Testing of MPP condensor 440 Volt Single Phase of approved make as required as per specification (4mfd)
Supplying and fixing of approved make step type electronic Fan regulator including connection etc. as required on existing board (100Watt)
Suppyling & fixing of Electronic choke in the existing 36/40Watt T-8 tube fitting. (36/40Watt)
Supplying,Fixing and Testing of Flourescent Tube rod ISI marked of approved make as required as per specification (4' x 36/40Watt)
Supplying, Fixing and Testing of LED Lamp with inbuilt electronic driver ISI marked of approved make as required as per specification (5Watt)
Supplying, Fixing and Testing of LED Lamp with inbuilt electronic driver ISI marked of approved make as required as per specification (14Watt)
Supplying, Fixing and Testing of LED Lamp with inbuilt electronic driver ISI marked of approved make as required as per specification (18Watt)
Suppling,Fixing and Testing of Compact ,Fluorescent Lamp Non-Retrofit ISI marked of approved make as required as per specification (36Watt 4pin)
Supplying, Fixing and Testing of LED tube fitting with inbuilt electronic driver ISI marked of approved make as required as per specification (16 Watt)
Providing & fixing of 18WATT led, 240Volt surface mount ceiling light fitting with all accessories.
Total impact of GST for the purpose of CTC
P R ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .