Supply and Installation of LED fittings.

Amount

Supply and Fixing of following 220V LED indoor/outdoor type fiitings incl all mounting accessories.

i) Philips luminaries Cat No. ST271T LED20/830 PSU-E NB 1C BK (Track Light from Ceiling) with all accessories.

ii) Philips luminaries Cat No. ST271T LED20/830 PSU-E NB 1C BK (Track Light on Table to be mounted from Ceiling) with all accessories.

iii) Philips luminaries Cat No. RS271B LED20/830 PSU-E NB WH (Spot Light) with all accessories.

iv) Philips luminaries Cat No. DN092B LED10S-4000 PSU WH (Down Light) with all accessories.

v) Philips luminaries Cat No. DN192B LED10S-6500 PSU WH S2 (Down Light) with all accessories.

vi) Crompton luminaries Cat No. LCDSPLN-R-18-CDL (Down Light).

vii) Philips luminaries Cat No. RC380B LED36S -6500 G4 L60 W60 PSU OD (2x2 Panel Light) with all accessories.

viii) Cromption luminaries Cat No. LCL-07-CDL (Mirror Light) with all accessories including lamp as required.

ix) Philips luminaries Cat No. BN308C LED20S-6500 L60 PSU WH with all accessories.

x) Philips luminaries Cat No. 30973 (Picture Light) with all accessories including lamp as required.

xi) Philips luminaries Cat No. WT202W LED6S NW PSU S2 PC (Bulkhead Light) with all accessories.

xii) Philips make 9 W LED Bulb, Model- Ace Saver.

xiii) Philips luminaries Cat No. BRP410 LED CW 072 MR FG S1 PSU GR (Compound Light) with all accessories.

Supply and Fixing 240 Volt, 50 Hz, 230 mm (9") sweep, 1370 rpm, heavy duty AC exhaust fan on wall after making hole on wall and mending good the damages and smooth cement finish etc. and providing 2x1.5 sq,mm. copper wire and making connection incl. S/F GI louver shutter on wall as to G.S.( Make-EPC Elect. Pvt. Ltd)

Supply & fixing 250 volt, 50 Hz, 1200 mm Sweep A.C. ceiling fan (without regulator) complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. (Make- Crompton Greaves, Model-Aura Prime Antidust, Colour- Husky Gold)

Supply and fixing of 220V, 50Hz, 450mm sweep AC wall mounted fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length (Make: Orient Electric, Model- Wall Tornado II)

Supply and Delivery of 1.1kV grade aluminium armoured XLPE cable (Make- Finolex/ Polycab/ Havells) of following sizes:

i) 4 core 185 sqmm

ii) 4 core 70 sqmm

iii) 4 core 50 sqmm

iv) 4 core 10 sqmm

v) 2 core 6 sqmm

vi) 2 core 4 sqmm

SITC of LT, Cubicle Type, Floor Mounted, totally enclosed, fully compertmentalized electrical control panel suitable for operation at 415Volt, 50Hz, asper size,design & drawing to be approved by EIC.The panel board will be fabricated by CPRI approved panel maker as per detail specification below

The Degree of IP protection for the enclosure will be IP-52. It will have multitier arrangement, having necessary cable alley better than 50% at both end, with rigid and self supporting structure fabricated with sufficient no. of channels & covered by 2mm thick CRCA sheet with Base channel ISME-100(Min).

All incoming, outgoing SFUs/MCCB sare to be house din respective compartments with hinged and gasketted doors at the front .All the doors should have pannel lock arrangements in such a fashion that it can not be unlocked unless the respective feeder remains OFF .The rear of the pannel should have gasketted wire netguard for ventillation and arrangement shall be made for easy access to each compatment by providing rear doors with locking system.

The pannel is to be properly gasketted to prevent the dust and vermin. All vertical and horizontal busbar chamnbers are to be properly arranged and all electrical switches, busbars are to be fixed by M Snut-bolts on suitable hylam board/non-hygroscopic insulators of adequate size and dimensions. The outgoing feeder connections from respective switches are to be made at the rear side of the pannel by means of bus-bar/ multi core copper cables, to be terminated on bolted type terminals for cable connections or bush insulators for bus connection. It will be powder coated after seven tank pre treatment process. 2Nos copper strip of size as per IS shallbe fixed all around the panel and will be connected to 2nos copper earth busbar connected to incoming earth conductor. All tests should be made for the complete panel.The following 415/230V olt Open Execution Type switches with fuses & accessories will be fixed in the panel. (The Incoming and Outgoing MCCB will be of Legrand or L&T make, all the other accessories will be Legrand/ Seimens/ L&T make].

INCOMING: 415V, 250A, 25kA/35kA FP MCCB (O/L, S/C protection rotary handle) - 1 Set.

CHANGEOVER: 415 V, 250A TPN on load front operated Changeover switch Change Over switch - 1 Set.

BUSBAR: 415 V, 315 A Copper Busbar of dimension of Cu. Bars [85mm long]: 4 x 40x5mm, Sheet Metal Box: 500x150mm - 1 Set.

OUTGOING: i) 415V,100A, 25kA/35kA FP MCCB (O/L, S/C protection rotary handle) - 1 Set. ii) 415V, 125A, 25kA/35kA FP MCCB (O/L, S/C protection rotary handle) - 2 Set. iii) 415V, 160A, 25kA/35kA FP MCCB (O/L, S/C protection rotary handle) - 1 Set. iv) 415V, 63A, 25kA/35kA FP MCCB (O/L, S/C protection rotary handle - 3 Set.

SITC of LED illumination sign board on the glow sign board structure fabricated by 12ft x 6' (ft) depth ACP box supported with 1.5"x1.5" MS hollow squre pipe or Aluminium hollow squire pipe of 18 SWG all around. The 3mm ACP fabricated should be provided by laser cutting 6mm laser cut acrylic latters out of which 5mm rising and border line of the front side should with cover 1.5" Aluminium channel as per the direction of EIC. The sign board should be glow by 1.5W LED module cool white in color incl. 12V 250W power supply. Back side of the board covered witrh 26SWG GI sheet to protect the rain water. The sign board should be fixed on Wall of the building with supply and mounting of iron frame structure for supporting the board as required & mending good damages as per direction of EIC. The cost of transpotation charges are included. The sign board should be made as per the matter and as per direction of EIC.

Supply and Installation of Single Phase Timer control panel for automatic segmentia; consisting of following:

i) 12 Way SPN MCB DB (L&T) - 1 No.

ii) Digital time switch (L&T, Cat no. AUTS02DIG00) - 1 No.

iii) 40 A DP Power Contactor (L&T, MU-2P Contactor) - 1 No.

iv) 40A DP MCB Isolator (L&T) - 1 No.

v) Toggle switch (L&T)- 1 No.

vi) Indicating lamp (L&T) - 1 No.

vii) Inter connection by suitable size copper conductor (Havells/ Finolex/ Polycab)

S & Erection of 2mtr long 80mm dia GI pipe pole (Make- Bansal ISI-M/ Jindal ISI-M/ Utkarsh-ISI-M) with pole cap and base plate welded with suitable sizes MS sheet in the bottom of the pole with pole cap & base plate in CC (6:3:1) foundation of dimention 450x450x600 mm incl drilled hole on pole above roof after chipping the roof surface incl. 3mm thick neat cement finish incl painting two coats of Al paint over one coat of RO primer as per direction of EIC.

Supplying and Fixing (200 x 150 x 100mm) CI water proof looping cable box having hinged CI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.

S & Fixing CMDA type Non-detachable 50 mm dia. 1.5Mtr Long arm Bracket at an angle 100 to 110” to horizontal with necessary Bolts, nuts etc. incl. Painting two coats of Al. Paint over one coat of R.O Primer as per G.S and as per direction of E.IC.S& Fixing CMDA type Non-detachable 50mm dia. 1.5Mtr Long arm Bracket at an angle 100 to 110” to horizontal with necessary Bolts, nuts etc. incl. Painting two coats of Al. Paint over one coat of R.O Primer as per G.S and as per direction of E.I.C. a) Single Arm Header

Pole wiring with 3x1.5 sqmm 'FR' PVC insulated unsheathed wire of Cu. conductor through S&F 19 mm dia heavy gauge polythene pipe through the pole and making necy. Connection.

Painting of GI Pole of 2 mtr. length and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint.

i) 1st coat of aluminium paint over 1 coat of RO priming

ii) 2nd coat of aluminium paint over 1st coat

NOTE:- The Rates to be Quoted by the Bidder should be Inclusive of all Taxes.

M/S Basak Electrical Repairing House

MILLENNIUM ENGINEERS CO OP SOCIETY LTD

M/S B. K. DEY SARKAR