REPAIRS TO HARD STANDING, FOOT PATH, FENCING, COMPOUND WALL AND AREA DRAINAGE IN ZONE A AND B UNDER GE CLEMENT TOWN, DEHRADUN

Amount

Demolition in cement concrete (unreinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D2 (Using 40mm graded crushed stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and as directed.

M&L for rubber moulded vibro compacted coloured glossy finish precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 grade laid over and incl 25mm thick sand cushioning complete all as specified and as directed.

M&L for rubber moulded vibro compacted coloured glossy finish precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade laid over and incl 25mm thick sand cushioning complete all as specified and as directed.

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in coping, edging including necessary form work complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (Using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound complete all as specified and directed

M&L for PCC (1:2:4) type B2 (Using 40mm graded crushed stone aggregate), 100mm thick as in floor/paving etc finishing even and smooth without using extra cement as in floor/paving laid in panels including filling the joints with mastic compound complete all as specified and as directed.

Dismantaling fencing wire mesh of any type and in any position complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

Fixing only Chain link fencing inlcuding line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified and as directed.

Dismantling concertina coil 600 mm dia of coil fixed in slots of angle iron posts of any description complete all as specified and as directed.

S&F concertina coil with punched tape 600 mm dia with wire diameter 2.6 mm and razor size 15mmx12mmx0.5mm, spacing of blade 26mm, fixed on angle iron frames over RCC or brick post/wall including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and as directed. The razor tape should have minimum galvanised coating thickness 12 microns (both side inclusive). The concertina coil should have as per relevant IS and should be hot dip galvanised coated with CLR anticorrosive paint by making diamond shape with the help of dove tail clips (18 SWG) fixed over razor wire with the help of hug ringes (14 SWG) complete all as specified and as directed.

Fixing only concertina coil 600 mm dia of coil (except materials) on angle iron frames over RCC or brick post/wall including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and as directed.

Dismantling barbed wire fencing fixed in slots of angle iron posts of any description complete all as specified and as directed.

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed.

Fixing only Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing (except materials) and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with MS post of grade Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, brick work, masonary etc, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavation in post hole (or similar holes) each n. exc 0.5 cum, getting out, returning filling in watering and removing surplus soil to a distance n. exc 50m and making good surface in any type of soil complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C1 (Using 20mm graded crushed stone agrregate ) as in foundation of posts, railing and similar work complete all as specified and as directed.

M&L for mild steel work as posts and struts in fencing including cutting tops as required drilling holes, notching for wires etc and similar works conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F mild steel screw bolt (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 11 to 15 mm and length of bolt exc 5 cm but n. exc 10 cm complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and as directed.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L Cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundations or mass concrete complete all as specified and as directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Brick work except bricks with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and as directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM (1:4) on fair face of brick walls or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying two coats of cement base paint after preparation of newly plastered/concrete surfaces over alkali resistant primer on wall including preparation of surfaces complete all as specified and as directed.

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for factory made reinforced precast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs medium density, MD-10 confirming to IS-12592-2002 (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM (1:4) complete all as specified and directed. Note : Reinforcement shall be measured and paid for separately.

S&F mild steel framed work as in manhole cover frames conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

JBN CONSTRUCTION

M/S Manmohan Singh Anand

P K ASSOCIATES

kalakriti enterprises

Bharat Bhoomi Construction

V R Associates

M.K Engineers

SBG Buildcon Private Limited