Kozhikode Corporation 20-21 Providing Waterproofing, Landscaping and Stage for S K Hall (Project 3).

Amount

WATER PROOFING, STAGE PARTITION AND LAND SCAPING

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

10.26.3 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

9.117.1 : Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm

9.118.1 : Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).

od925316/2020_2021 : Roofing with polycarbonate sheet 2mm thick or nearest available thickness overlaps of 150mm at ends and aluminium hooks or bolts and nuts including plain washers and bitumen washers etc. complete. (OD based on data provided estimation record room construction at the open terrace of corporation office building)

21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

od937725/2020_2021 : Providing and fixing stainless steel tubular handle bar 32 mm outer dia, 3.0mm thick & 600 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.( OD based on DSR 21.12.1)

od937690/2020_2021 : Providing and fixing 150x50 mm stainless steel locks ( best make of approved quality ) for toughened glass doors including necessary cutting and making good etc. complete (OD based DSR 21.13)

od937738/2020_2021 : Providing and fixing 50 mm dia or nearest available size stainless steel finished floor door stopper with rubber cushion, necessary SS screws etc. to suit shutter thickness complete( based on DSR 14.34)

od937692/2020_2021 : Providing and fixing 12mm thick toughened glass for window openings and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of SS glass patch fittings shall be paid in seperately): ( OD based on DSR 21.3.3 )<br>With 12mm thick toughened glass

od937734/2020_2021 : Providing and fixing 50x50 mm SS glass patch fittings ( best make of approved quality ) for toughened glass windows / partitions including necessary cutting and making good etc. complete (OD based on 21.13)

21.3.3 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness

od908683/2020_2021 : Providing and laying Natural stone 600 x600 mm nearest available size in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of 6mm metal, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with green grass as per required size and pattern, finishing and sweeping extra complete all as per direction of Engineer-in-Charge.grade with approved color design and pattern.<br>

17.10.1.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 250 mm

od927613/2020_2021 : Supplying and fixing ready made soak pit perforated reinforced concrete ring with cover of 95 cm outer diameter, 4 mm thickness and 125 cm depth including earth work excavation and outer side filling with 20mm and 40mm nominal size stone aggregate including cost and conveyance of all materials labour charges etc complete

od911491/2020_2021 : Water proofing: Providing and laying waterproofing treatment on roof of slab by applying modified mortar/ screened concrete using bonding agents and applying a coat of MYK flow arm primer EPW. including cost and conveyance of labour charges including cost for screened concrete.

od911492/2020_2021 : Providing and laying in position screed cement concrete of specified grade excluding the cost of centering and shuttering- All work upto floor five level 1:2:4( 1 cement: 2 coarse sand: 4 Graded stone aggregate 6 mm nominal size)

13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

od912095/2020_2021 : Supplying and planting Australian grass at 100 plants per sqm over a 50mm thick layer of soil and mannure mix including proper drainage and a form a lawn in period of 100 days.

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od925593/2020_2021 : Providing & fixing Galvalume sheet 0.45mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5X55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required. (OD based on od270870/2017_2018)

50.6.1.8 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

11.3.1 : Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

BALAKRISHNAN P V

Bidder Name

biju p v

BALAKRISHNAN P V