REPAIR TO FLOORING, PLUMBING AND SANITARY WORKS IN OTM ACCN AT NORTH OF RAILWAY LINE UNDER GE MISAMARI

Amount

Demolition Brick Work or Stone/ Bolder masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed. Note:Demolished material to be used for filling under floors to bring upto required level.

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. (Note:Demolished material to be used for filling under floors to bring upto required level, if neccesary)

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed.

Dismantling Stone Slabs and tiles of any description or thickness in Floors, Aprons, etc., laid dry or laid dry and pointed, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each,,complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each, complete all as specified and as directed.

Taking down Shutter of any description, not exc 1.00 Sqm Each, complete all as specified and as directed.

Taking down shutter from the frame exc. 1.00 Square Metre but not exc. 2.00 Square Metre and refixing in same opening, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness including Nainital or similar Roof Coverings, complete all as specified and as directed.

Dismantling Timber Scantling 40 Sq Cm and over in Section in any position in Unframed Work, complete all as specified and as directed.

Dismantling Timber Fillet, Rails, Posts, Rafter, Purlins, etc. under 40 Sq Cm in Section in Unframed Work, complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel Work of any description not otherwise provided, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces mixed with water proofing compound, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : Integral Water Proofing Compound shall be Measured and Paid separately as ‘Supply only’ under relevant Items.

Supply only Integral Water Proofing Compound, conforming to IS-2465-1975 and/or as approved, complete all as specified and as directed.

M&L preparing new plaster surface of Walls and applying Two Coats of Cement Base Paint over a coat of cement primer, complete all as specified and as directed.

M&L preparing new Plastered Surfaces of Walls and applying Two Coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 ( Using 20mm graded agg) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates concrete complete all as specified and directed.

M&L Cement Concrete 1:3:6, C2 (40mm graded aggregate), 75mm thick as in Plinth Protection, etc., finishing Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles, complete all as specified and directed.

M&L Marble of green shade other than white and black, 18 to 20mm thick (table rubbed and polished) in steps, jambs,pillars, window cills, cocking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Vtirified Ceramic Tiles 10mm thick (Square/ Rectangular) Dark shade polished, area of each Tile not exc. 0.36 Sqm, in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L glazed ceramic coloured tiles, glossy finished of size 350x450x7mm/ 350x250x7mm thick as in vertical surfaces such as skirting/dados and riser of steps., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.

S & F in repair 25mm dia, MS curtain rod of PVC coated including brackets end stop as requried for door/window for each, complete all as specified and as directed.

Refixing door shutter of any description exc. 1.00 square meter and n.exc. 2.00 square meter each in size at same or other opening, complete as all specified and as directed.

Refixing door shutter of any description n.exc. 1.00 square meter each in size at same or other opening, complete as all specified and as directed.

M&L Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

M&L Factory Made Second Class Hardwood 30mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(a) and fitted to Wooden Chowkat, complete all as specified and as directed.

M&L Factory Made Second Class Hardwood 30mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(a) and fitted to Wooden Chowkat if prepared to slide horizontlly on beads including supplying and fixing beads, complete all as specified and as directed.

M&L Flush Door Shutter 30mm thick, Solid Core Construction with Block Board Core and Plywood face Panels commercial type on both side with Particle Board and fitted to Wooden Chowkat, complete all as specified and as directed.

S & F Powder coated Aluminium door with frame and shutter and glazing 5 mm thick tinted glass and 12 mm thick pre-laminated particle board exterior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, Aluminium stopper cleats, iron mongary etc. section of aluminium door shall be of following sizes :- Frame : 100 X 44 X 1.5 mm thick with rawal plug, Middle lock rail : 150 X 44 X 1.5 mm htick Bottom Rail : 150 X 44 X 1.5 mm thick Top Rail/Style : 85 X 44 X 1.5 mm thick, Glazing beading : 0.70 mm thick, Aluminium Handle D type : 150 mm , Aluminium Tower bolt 200 mm long , Mortice lock - 100 mm 4 lever, 4 Nos 100mm long med wt aluminium hinges for each door, Aluminium stopper cleat : 02 Nos, incl hydraulic door closer for each shutter, incl taking down old unserviceable aluminium door of any description complete all as specified and as directed.

S & F Anodised Aluminium window, ventilator with shutters and frame made with aluminium section with and including glass (as specified below), Aluminium section shall be of size as given below :- Frame : 65 X 40mm X 1.50 mm thick, Top and botttom and side style/ rail of shutter : 44 X 47 mm X 1.50 mm thick, Glass : 3 mm thick tinted glass fixed with rubber gasket with aluminium beading Aluminium fitting such as aluminium handle , aluminium Tower bolt 100 mm long, 3 Nos 75mm long med wt aluminium hinges for each shutter, Aluminium handle 100 mm long incl taking down old unserviceable aluminium window/ventilator of any description complete all as specified and directed.

Repairs to Aluminium doors of any size by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading scrw etc and refix in the same opening after complete repair except glass, complete all as specified and as directed.

M&L for easing of door / window shutter n.exc 1.00 sq m in size without taking down and making operation in all respects complete all as directed.

M&L for easing of door / window shutter exc 1.00 and n.exc 2.00 sq m in size without taking down and making operation in all respects complete all as directed.

S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick wood grain printed PVC sheet and edge will be painted to match with printed sheet as per specification and drawing, complete all as specified and as directed.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), design with 2mm thick 3D wood grain moulded PVC sheet painted on the front face & 2mm thick plain colour PVC sheet on back face complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F extruded aluminium alloy with galvanised mild steel hinge pin butt hinges, 100mm long, type C-21, andosid and fixed,complete all as specified and as directed.

S&F Mild Steel Butt Hinge of size 75mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F Mild Steel Sliding Door Bolt 250mm long, Plate type, Black Japanned Finish with bright Bolt not less than 12mm dia, minimum 6 Bolts and Nuts 4 on Bolt Plate 2 on Staple Plate and fixed, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt 100 mm long, Extruded Section and fixed, complete all as specified and as directed.

All as per Item no.46 here in before but for 150 mm, complete all as specified and directed.

S&F Aluminium Handle 100mm long Cast type, complete all as specified and as directed.

All as per Item no.48 here in before but for 150 mm, complete all as specified and directed.

Supply and fix in repair aluminium body door closer hydrauliclly regulated, designation No. 2, universal type, suitable for door shutters of 700mm in width and weight more than 35 and fixed complete all as specified and as directed.

Supply and fix in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

M&L Welding in repair exc 2.5cm but n.exc 5cm in length ( exc 20mm but n.exc 25mm in length), complete all as specified and as directed.

S&F in repair Ordinary Rat Tail 300mm, Rod Pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

S&F Steel Window with side Hung Shutters including Hinges with Steel Handle and Steel Peg Stay, complete with Glazing Bars, dovetailed or welded, complete all as specified and as directed.

S&F Steel Window with side Hung Shutters including Hinges with Steel Handle and Steel Peg Stay, complete without Glazing Bars, dovetailed or welded, complete all as specified and as directed.

M&L Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165,complete all as specified and as directed.

M&L Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

S&F in repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

M&L preparing new or previously untreated Wooden Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Hacking out old/broken Glass (any thickness, size, quality or description) from Wooden Frames/metal frame, Glazed with Putty or fixed with Beads, complete all as specified and as directed.

M&L Sheet Glass, Ordinary, 3.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

Supply only Sheet Glass, frosted, 4.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

Repairs the leakage in the existing 15/20 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple upto 200 mm including necessary cutting/digging and making good disturbed surface to matching with existing one , complete all as specified and as directed.

Repairs to leakage in floors of WC / Bathroom / Kitchen by breaking of existing floor and providing new PVC floor trap and grating and making good as per existing floor, complete all as specified and as directed.

S&F of PVC bend pipe for PVC 10 ltr flushing cistern for EWC / IWC as in repairs, complete all as specified and as directed.

Repairs of leakage of any type by providing M-seal, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

All as per Item no. 71 here in before but for 20 mm, complete all as specified and directed.

S&F in repair Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in MES Schedule , complete all as specified and as directed.

S&F in repair Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in MES Schedule , complete all as specified and as directed.

Cleaning and removing all Scale dirt etc form PVC/RCC tanks and from mouths of circulating pipes including washing and old damaged PVC tank lid, capacity of tanks n.exc 500 ltr., complete all as specified and as directed.

All as per Item no. 75 here in before but capacity exc. 500 liter and n. exc. 1000 liter, complete all as specified and directed.

S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints fixed on wall, laid in Trenches or in Floors complete all as specified and as directed.

All as per Item no.77 here in before but for 110 mm, complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm bore (dia) Bend any type, and jointing with Solvent Cement , complete all as specified and as directed.

All as per Item no.79 here in before but for 75 mm, complete all as specified and directed.

Taking out existing worn out Bitumenous Felt by cutting, chiseling, scrapping, etc. including PCC Roof Padding not exc. 50mm thick if any, cleaning the surfaces by booming, brushing, washing, etc, removing dust, debries/ rubbish, etc. from the Site to a distance exc. 50.00 Metre and not exc. 100.00 Metre, complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:- (i) M&L for 25 mm thick PCC 1:2:4 type B-0 (12-50mm) graded stone aggregates) as in roof padding finished even & smooth for laying roof treatment. (ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be less applied over bituminous primer as specified above over a Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm.

S&F in repair PVC waste pipe 32 mm dia with coupling suitable for urinal and wash hand basin down pipes of required length , complete all as specified and directed.

S&F in repair Vitreous China White Squatting Pan, ‘Orissa’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed, complete all as specified and as directed.

S&F in repair Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm bore waste coupling of PTMT (half or full threaded of minium weight 32-445gms), a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair Ball Valve 15mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed.

All as per Item no.87 here in before but for 20 mm, complete all as specified and directed.

S&F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete as directed complete all as specified and as directed.

All as per Item no.89 here in before but for 20 mm, complete all as specified and directed.

S&F in repair Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc., complete all as specified and as directed.

S&F in repair CP jet for EWC etc, complete all as specified and as directed.

S&F in repairs to CP health faucet of 15 mm bore, complete set all as specified and directed.

S&F in repair PVC Connection Pipe 15mm in size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S&F in repair Brass Chromium plated Tubular Towel Rail, 20mm dia, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed, complete all as specified and as directed.

S&F in repair 15mm bore CP Brass Wall mixer 3 in 1 Chromium plated for mixing hot and cold water screwed down for iron pipe and fixed with connections with and including L bend for shower provision complete all as specified and directed.

S&F in repair bib Tap 15mm bore (dia), Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F in repair bib Tap 15mm bore (dia) Fancy Type, Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F in repair Stop Valve 15mm bore (dia), Fancy type, chromium plated, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S&F in repair Pillar Tap 15mm bore (dia), Cast Copper Alloy, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

S&F in repair Stop Cock 15mm bore , Chromium Plated with long shank, Concealed type, screwed down high pressure with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S&F in repair fancy type CP, 15 mm dia twin angle cock, cast copper alloy screwed above high pressure with crutch or butterfly handle and screwed both ends for iron or for union, complete all as specified and as directed.

S&F PTMT grating Doom 100mm dia (minimum weight 25 Grams) complete all as specified and as directed.

S&F in repair Brass Chromium plated Shower Rose 125mm size, with or without Swivel Joints, and fixing to Steel Pipe or Union and fixed, complete all as specified and as directed.

S&F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed, complete all as specified and as directed.

S&F in repair Sheet Glass Shelf Assembly consisting of 5.5mm thick Sheet Glass Shelf 12 Cm wide with Chromium plated Bracket Guard and Railing 60 Cm long and fixed, complete all as specified and as directed.

S&F in repair 1mm thick steel plate rack size 785x900 mm , complete all as specified and as directed.

S&F in repair Sink with Drainage Board made of Stainless Steel l.0mm thick Kitchen or Laboratory Overall size 915x460mm Bowl size 410x330x 160mm with Plugs, Washers and Wastes, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe,Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S & F 0.63 mm thick Plain galvanised,mild steel sheeting in ridges, hips, valley gutter all as specified with grade of zinc coating 275, complete all as specified and as directed.

S & F glavnised corrugated mild steel seathing 0.63 mm thick with two corrugation side lab fixed with coatch screw and washer in roof, wall etc with grade of zinc coating 275., complete all as specified and as directed.

S & F 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs fixed with L of J type bolt, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

M&L Second Class Hardwood in Scantlings Wrought Timber Framed and fixed complete all as specified and as directed.

M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in Section Clean sawn, secured with Nails, sectional area exc. 13 Sq Cm but not exc.25 SqCm , complete all as specified and as directed.

M&L Plain fillet bullnosed, splayed, chamfered or rounded on one edge of 2nd class hard wood (Sal) sectional area exc 6 sq cm and n.exc 13 sqm cm, complete all as specified and as directed.

M&L for 12 mm thick perforated particle board / tiles for insulation and acoustic purpose 60x60 cm in size fixed with nails to timber frame work or with staples on snap grid, complete all as specified and as directed.

M&L for 12 mm thick particle board for insulation purpose fixed with nail to timber frame work at any position complete all as directed.

S & F in repair 4 mm thick designer non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/aluminium framework with screw, , complete all as specified and as directed.

S & F 4mm thick Asbestos cement building boards fixed to timber frame work in ceiling, complete all as specified and as directed.

M&L for GI Frame Work for Seamless Ceiling comprising of GI Perimeter Channnel 0.55mm thick with Two Unequal Flanges of 20 and 30mm and Web of 27mm fixed to surrounding Wall using Nylon Sleeves and Screws at 450 mm Centre to Centre/ Intermediate Channel 0.9mm thick having Two Equal Flanges of 15mm each and Web of 45mm suspended from Soffit at approx 900mm centre to centre with GI Cleat and Steel Expansion Fasteners with and including Ceiling Section (not exc 1.20 Metre length) of 0.55mm thickness having Kurled Web of 50mm and Flange of 26mm each with Lips of 10.5mm fixed to the Interme-diate Channel with Connecting Clips across the Intermediate Channel at 457mm Centre to Centre, complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., conforming to Fe 290-W (Gde E-165) quality A, drilled for fixing of steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,complete all as specified and as directed.

S&F of Structural steel, rolled section as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410 W (Gde-E-250), complete all as specified and as directed.

Sunrise Enterprise

Markson