Loading
Loading…
Loading…
Tender Value
₹60.0 Cr
EMD Value
₹60.0 L
Closing Date
31 Oct 2026, 5:30 pm
Karnataka Neeravari Nigam Limited
MOHAMMED MUSTAFA S H
Survey, Investigation, Design, Supply, Installation, Testing and Commissioning of Lift Irrigation Scheme Comprising Preliminary Works, Construction of Intake Canal, Forebay & Jack well cum Pump House, Construction of Rising Main-I and Feeder main (Part), Pumping machinery and its components, Electrical works (Substation, Feeder bay and transmission line) including O&M for 5 years for Augmenting Suffering atchkut of 9801 Ha Coming under Raibag High Level distributory (RHLD) and Raibag distributory in Raibag and Chikkodi taluks of Belagavi district by Lifting water from Krishna River on Turnkey basis (PHASE -I).
KNNL/2026-27/LI/WORK_INDENT4782
KNNL/2026-27/LI/WORK_INDENT4782
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
KNNL Division GLBC Div No 1 Ghataprabha
18 documents required · 14 mandatory · 4 optional
To qualify for award of this contract, each tenderer (either individual or JV Partner) in his / her name should have in the last five years (2021-22 to 2025-26) period. Achieved in at least two financial years a minimum financial turn over (in all classes of civil engineering works only) of Rs. 9445.00 Lakhs(including GST) Audited profit and loss account certified by a practicing Chartered Accountant along with the copy of income tax returns filed for the years indicated above should be furnished. Duly mentioning UDIN on Turnover certificate (from CA).(The annual turnover of previous year shall be updated to the year of tender invitation at 10% per annum). In case of JV all the partners combined satisfy the annual turnover. However, the lead partner should have at least 51% of the Turnover in any of the two years during the last five years
To qualify for award of this contract, each tenderer (either individual or JV Partner) in his / her name should have in the last five years (2021-22 to 2025-26) period. Satisfactorily completed (at least 90% of contract value of ongoing works) as a prime contractor, at least one similar work costing not less than Rs. 3542.00 Lakhs (including GST). Work done certificate issued by an officer not below the rank of Executive Engineer of the concerned Division and Countersigned by the Superintending Engineer of the concerned circle is to be uploaded for the technical bid. The cost of completed works of the previous year shall be given a weightage of 10% per year to bring it to the price level of financial year in which tenders are invited.Note-: Similar work comprises of Survey, Investigation, Design, Supply and construction of Lift irrigation scheme/ tank filling scheme / water supply scheme involving Jack well cum pump house, fore bay, Intake, Rising Main, Electro-mechanical & Electrical work includes transmission line, Bay and Sub Station etc/
The intending Bidder (Individual/JV)/Tie-up partner Should have supplied and successfully commissioned at least 1 number of VT pumps with a capacity (flow rate) not less than 1.033 Cumecs for each pump with a head not less than 70.0 mtrs for each pump during the last 5 years (i.e., from 2021-22 to 2025-26). The necessary work done certificate issued by an officer not below the rank of Executive Engineer and countersigned by the Superintending Engineer of the same circle should be uploaded
The intending Bidder (Individual/JV)/Tie-up partner Should have supply, erection, testing, completion & commissioning of at least 3.22kms of pipeline made of MS pipes with inner dia not less than 900 mmduring the last 5 years (i.e., from 2021-22 to 2025-26). The necessary work done certificate issued by an officer not below the rank of Executive Engineer and countersigned by the Superintending Engineer of the same circle should be uploaded.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 Executed in any one year, (for a continuous period of 12 months) the following minimum quantities of work.Earthwork (both in Excavation & Embankment)-43022 Cum,Cement Concrete (including RCC & PSC)-3290 Cum,Reinforcement steel-363 MT
The intending bidder can submit bids as an Individual bidder along with Tie up of pump manufacturer. The Tie up is to be formed prior to the bidding.Tenders from a Tie-up proposed in this bid, the bidder shall upload an agreement with only one pump manufacturer on Rs 500-00 stamp paper in the prescribed format which shall be concluded prior to bidding and enclosed to the bid document. For proof of the Tie up, in the technical bid, the prescribed format under section 2 - instruction to tenderer (ITT) shall be followed. (Multiple tie-ups are not allowed)
In case of Joint Venture bidding, the lead partner should have at least 51% partnership if applicable
Each Tenderer should further demonstrate: Availability by owning at least 50 % of the required / specified key and critical equipment for this work and the remaining 50 % can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.) for availability for this work are to be furnished. Excavators(2own&2hire),Tippers (2own&2hire),RMC Plant(1own&1hire),Transit Mixer(2own&2hire),Vibrators(1own&1hire)
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculatedas under ASSESSED AVAILABLETENDERCAPACITY (A X N X 1.5- B) WhereA Maximum value of civil engineering works executed inanyone year duringthe lastfive years (Updated to FY 2026-27 price level) taking into account the completed a well as works in progress. N Number of years prescribed for completion of the works for which Tenders are invited. B Value, at FY in which the tenders are invited price level, of existing commitments and on-going works to be completed duringthe next 2026-27 years. If a bidder participates in more than one bid and technically qualifies and subsequently becomes lowest in more number of bids than his/her bid capacity, then the tenderer can give his option to select the works based on his/her preference equivalent to his bid capacity. Further for the balance bids next lowest bidders will be eligible to accept at lowest bidders rates equivalent to their bid capacity provided if the competent authority accepts it.Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
Each Tenderer should further demonstrate: Liquid assets and / or availability of credit facilities of not less than Rs1771.00 Lakhs (Credit lines letter of credit / Certificates from banks for meeting the fund requirement etc
Technical details containing document with preliminary designs, working methodology in support of their bid as per the bidding document
₹7,500
₹60.0 L
1 Oct 2026
1 Oct 2026
2 Nov 2026
30 Oct 2026
13 Oct 2026
Prelimnary Works
Survey, Investigation and Detailed Engineering of Lift Scheme consisting of Electromechanical, Electrical works, Intake channel, Jackwell cum Pump House, Raising Main including structures, Delivery C...
Construction of Intake Canal and Forebay
Earth work excavation for foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing 25 mm dia 2.50 m long cold twisted defomed steel anchor rod with 1.25 m length driven into 38 mm dia hole drilled in bed rock and remaining length embedded in concrete / masonry i...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 4...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate i...
Providing and fixing GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including cost of all materials, labour, drilling 8 mm...
Construction of Jackwell cum Pump house including delivery pipes and manifold, machinery bay, unloading bay, Regulators, and other miscellaneous works
Earth work excavation for foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and filling murrum / gravelly soil ( CNS soil ) for foundation or around pipes including cost of all materials, labour, spreading soil in layers of 100 to 150 mm, breaking clods, watering, c...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing 25 mm dia 2.50 m long cold twisted defomed steel anchor rod with 1.25 m length driven into 38 mm dia hole drilled in bed rock and remaining length embedded in concrete / masonry i...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement mortar 1:4 (1 c...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required smo...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...
Drilling 50 mm dia. holes vertical or inclined upto 10 degrees to vertical in rock / masonry / concrete by percussion drilling method using waggon drill or any other suitable equipment including cost ...
Grouting with neat cement grout mix of suitable consistency under specified grout pressure as directed in drilled holes by stage grouting method including cost of all materials, machinery, labour, red...
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Finishing walls with water proofing cement paint of required shade : Old work (one coats @ 2.20 kg/10 m²) complete. including preparing the surface after thoroughly cleaning the surface to remove all...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing, fabricating, assembling and fixing in position aluminum partitions Using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 1...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...
Providing & installing of Galvalume Roofing sheet of approved make 1060mm width (1000mm cover width), 28-30mm crest height with crest distance of 200mm c/c with 2 ribs at the centre for stiffing. The ...
Providing and fixing Aluminium Turbo Ventilator complete as per technical Specifications.Non Power Driven with 1.3mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total weight not le...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) Manifold pipe system of specif...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) Delivery pipes of specified...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying and fixing kinetic AIR VALVE PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 /EN 1074-4. Body and bonnet of DI conforming to IS-1865 of gra...
Providing and supplying C.I. DIF angle type spring loaded pressure relief valves of approved make and quality including nspection charges, transportation to Mepartmental stores excluding GST levied by...
Forebay Intake Gate Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift service gate consisting of skin plate, vertical and horizontal girders, wheels, s...
Forebay Intake Gate (Embedded Parts)Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breas wall liner upto 1m...
Under Slung Mono Rail Hoist for Forbay IntakeDesign, fabrication, supply, erection and commissioning of electrically operated mono-rail hoist assembly consisting of electric motor, rope drum, gear sys...
Under Slung Mono Rail Hoist Supporting Structure Design, fabrication, supply, erection and commissioning of structural steel hoist supporting structure consisting of columns, cross beams, bracings, st...
Embedded parts Trash rack Design, fabrication, supply, erection and commissioning of embedded parts consisting of liners for trash rack grooves ( for coarse and fine screenS ) with all accessories for...
Trash rack Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of panels of suitable height with vertical trash bars welded to structural steel frame at wider...
Construction of Rising Main I -1 No. of 1800mm diameter MS pipe of FE 410 grade with 10mm thick for a length of 4.540km (Ch 0.000 to 4.540).
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Manufacturing, supplying, laying in position, aligning, jointing, testingand commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specifi...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing 25 mm dia 2.50 m long cold twisted defomed steel anchor rod with 1.25 m length driven into 38 mm dia hole drilled in bed rock and remaining length embedded in concrete / masonry i...
VALVE CHAMBER: Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with ...
Supplying and fixing kinetic AIR VALVE PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 /EN 1074-4. Body and bonnet of DI conforming to IS-1865 of gra...
Providing and laying 250 mm thick sand blanket below embankment including cost of all materials, machinery, labour, spreading to specified thickness and all other ancillary operations complete.
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary / demarcation / chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, mu...
Construction of Feeder Main-1 No of 900mm diameter MS pipe of FE 410 grade with 5mm thick for a length of 1.500km (Ch 0.000 to 1.500).
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Manufacturing, supplying, laying in position, aligning, jointing, testingand commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specifi...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
VALVE CHAMBER: Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with ...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845/ EN 1074-4. Body and bonnet of DI conforming to IS-1865 of...
Providing and laying 250 mm thick sand blanket below embankment including cost of all materials, machinery, labour, spreading to specified
thickness and all other ancillary operations complete.
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary / demarcation / chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, mu...
Construction for Nala/Road and Canal Cross drainage Works along the Rising Main-I and Feeder Main(part)
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...
Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete
Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 4...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Supply, installation, testing and commissioning of Pumping Machinery and including Pumphouse lightening works (Vertical turbine pumps of capacity 1600 HP-2 Nos (1working & 1Standby), Pump Head is 87m Discharge Q is1.033Cumecs each
Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS: 1710 having specified pump output under specifie...
Design, fabrication, supply, assembling, testing & commissioning of HT pump panel board made of sheet metal duly painted with recess for cable entries at bottom suitable for 6.6 KV equipped with vacuu...
Additional VCB including sheet metal enclosure, extension bus bars,metering and relays complete for each additional pump for moumtingon common panel board
Supply, installation and commissioning of Load Break Switch with HRO fuses, CBCT and ELR in painted sheet metal enclosure with operating console complete for use along with Power Factor capacitor bank...
Supply, installation and commissioning of High tension Power factor capacitor bank operating at 6.6 KV of specified KVAr rating with all accessories complete as per specifications, terms and condition...
Supply, installation and commissioning of High tension Power factor capacitor bank operating at 6.6 KV of specified KVAr rating with all accessories complete as per specifications, terms and condition...
Supply, installation and commissioning of soft starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by- pass vaccum contactor with all accessories complete ho...
Supplying, laying and connecting XLPE 6.6KV, 3 core cable suitable for 28 KA short circuit rating with end connectors from HT panel to motor, starters, capacitor panels etc., complete as per direction...
3 core 400 sqmm cable with end connecters 3 R from power trafo to 6.6kV Switchgear panel;
Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder inlets w...
Supply 2X55Nos Cells =110VDC 100AH Plate Type Battery Set (Exide Make).
Inclusive of Battery Set Commissioning
BATTERY CHARGER :
Float cum Boost charger
110 V, 15A float and 30A boost (with float and boost battery charger as per technical specification
Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 V AC mounted in a duly painted sheet metal enclosure provided with NO / NC relays for transmitting signal ...
Supplying, installing and commissioning electrode actuated water level transmitter of approved make with all accessories to protect against dry running of pump.
Supplying and fixing Butterfly valve actuator DOL panel board with push button starter and all other accessories including wiring for specified number of valves etc complete..
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part - 1) or IS-7098 Part-1, Armouring strip thickness in av...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part - 1) or IS-7098 Part-1, Armouring strip thickness in av...
Labour charges for - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminium Rollers as directed by the departmental staff 120 to 240 Sqmm
Labour charges for - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminium Rollers as directed by the departmental staff 35 to 95 Sqmm
Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573
Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573
Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carriages with long and cross travel arrangement, main an...
Supplying and fixing of Double Flanged Resilient seated short body Butterfly valves of various dia as per IS 13095/EN 593 with integral DI seat face with approved soft sealing with body and disc of du...
Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for working pres...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
FIRE FIGHTING EQUIPMENT
Foam Extinguishing Type
Electrical works inside pumphouse Open Conduit System : Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fix...
Electrical works inside pumphouse Open Conduit System : Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fix...
Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering etc., complete with all le...
Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering etc., complete with all le...
Point wiring using class A Materials Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & ...
Point wiring using class A Materials Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & ...
Point wiring using class A Materials Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & ...
Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying 4mm thick plastic with necessary niches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws etc., complete with all leads & lifts
Supplying PVC/GI flexible conduit pipe 25mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Supplying and fixing of Electronic Ballast suitable for T5 Lamp with housing made of pre-coated steel/PC, Operating voltage range from 180V to 256V, 50Hz AC power supply flicker free warm start with o...
Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street lig...
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076 twin twisted PVC insulated wires, r...
Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 etc., complete with all leads & lifts 6Amps one way Switch
6Amps one way S...
6Amps 3way socket
Stepped Fan Regulator
16Amps one way switch
6/16Amps universal socket
Supply and installation of Auxiliary transformer 6.6 KV / 433 Volts160 KVA copper wound, insulating oil filled with all accessories complete
as per specifications.
Construction of Feeder Bay at Ankali Sub-station (110 kV Equipment) and its allied Works.
Earth work excavation for foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...
Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete
Providing hearting / casing embankment using homogeneous approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other op...
33 kV, 2500 A, 25 kA Outdoor Vacuum Circuit Breaker with terminal connector suitable for Al. tube/conductor and mounting structure etc., as per technical specification.
Erection of 33 KV Breakers ( a+ b + c)
a. Breaker erection, assembly, alignment & interpole wiring of breakers with its connected equipment including movement from the point of unloading to the point ...
Erection of 33 KV CT's and PT's ( a+ b + c + d)
a. Breaker Erection, assembly,
b. Assisting in Testing and Commissioning
c. Testing & Commissioning: Wiring & Testing
33 kV, 800 A, 25 kA Isolators, double break with
manual operating mechanism, with solid core
insulator, terminal connector suitable for Al.
tube/conductor, marshalling box etc., complete
For Erection Charges Upright
ACSR DRAKE conductor
(30/2.79 mm Al + 7/2.79 mm St), Std Wt: 842 Kg/KM
Support structure for switchyard Station structures Tower - 1T1 with peak(.932MT) 1 no's
Station Beams (1B1)(Sl.no II, A ii) (.504MT) - 1 no.s
Lighting arrestor (.147MT) 3 no's
Current transformer(.151MT) 3 no's
Isolator (.475MT) 2 no's
SS for Post insulators(.141MT) - 3 no.s
Supply of galvanised Bolts & Nuts
33 KV Solid core Insulators
Fixing of Solid Core Insulator
Earthing Materials / Earthing Grid FOR Pump house and Switchyard
30 kV Normal Duty Metal Oxide lightning arrestor (LA) with surge counter Arrestor (Discharge Class - 2)
33KV Line Control Panel
Earthing for the above equipments CI pipes 2.74 mts long, 126mm outer dia with two clamps GI flat.
Construction of 33kV Transmission line from Ankali Sub-Station to pump house to provide power supply to pumping station.( for a length of 9 km)
RCC Pole - 9.5 Mtr Long, 350 Kg WL for 33kV Lines) including material,labour ,erection,excavation,fixing.
(Average Span 40 Meters, for 9km=226-9 Total = 217
RCC Pole - 9Mtr Long, 145 Kg WLfor stud) including material,labour ,erection,excavation,fixing.
I-Beam 11mt long (200x100MM)
(ISLB-200X100=19.8KG/Mtr=217.8KG-RS 85/KG)
(32 numbers I-Beam consider for road /11KV crossings)
DP Set (2RCC Pole Strucrure Kit except pole) including 5 Kg, 8 SWG GI Wire for Structure Grounding.
(for 9 km=20 DP set = 40 Poles, already 20 poles taken so remaining 20 poles excess for DP Set)
DP Set (3 RCC Pole Strucrure Kit except pole) including 5 Kg, 8 SWG GI Wire for Structure Grounding
DP Set (4RCC Pole Strucrure Kit except pole) including 5 Kg, 8 SWG GI Wire for Structure Grounding
(for 9 km= 4 RCC Pole = 1 Set )
33KV,800A,25KA isolator double break with maunal operating mechanism with solid core insulator as per technical specification. upright without EB
Mounting structure for 1 set (1* 0.25 MT =0.25 MT)
Sl No. 18.2 Page No.43
Supply of galvanised Bolts & Nuts for 1 set
33 KV V shape cross arms with HT Single Top supports, clamps, bolts, nuts & washers. ( 217 poles + 23 extra)
Clamp 9.5M RCC Pole for 33kV (For 9 Km)
A)33kV Polymer Pin Insulator (For 9 Km) 10 % extra
Sl No 6.02 Page No.69 of 81
B)Silicon Rubber composite insulator 90KN-Tension strings
LT 2 Pin cross arms, with pole clamps, bolts, nuts (for RCC poles)
Sl No 2.07 Page No.4 of 81
Guy set with 2 Nos.15 Strain Insulator & Concreting materials etc (For 9 km)
a)Providing guarding between HT & LT line/Road crossing up to a Span of 40 Mtr (Including labour for fixing of necessary cross arms) (For 9 km)
b)11KV Horizontal cross arm with clamps,B&N for gaurding
Coyote ACSR (26/2.54 mm Al + 7/1.90 mm St), Std Wt : 521 kgs/km (1km =3.045) (For 9 Km=30.45 Km) = 30450 meter
a) Single Tension Clamps for Coyote ACSR (For 9 km)
b) Repair sleeve joints for Coyote ACSR Conductor (For 9 Km)
c) MSC joints for Coyote ACSR Conductor (For 9 km)
Spiral Earth Electrode for RCC/I-Beam poles with No 8 SWG Earth wire for earth connection 16 mm nutsexcluding charcoal and salt. (For 9 km)
a) Danger board with clamps, bolts nuts for fixing single pole and for DP Sructure as per drawing (For 9 km)
b) Number Plates with pole clamps, bolts nuts for fixing single pole (For 9 km)
c) Suppling and fixing of barbed wire to poles (1.5mtr/pole) (For 9 km)
C-Type wedge connectors for Coyte to Coyote ACSR
Grounding of 33KV GOS including cost of 40 mm dia 2.5 mm thick, class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation c...
Base concreting CC 1:4:8, a) Pole base 9.5 mtrs pole supports (500*650*150 mm)
Pole cocreting CC 1:2:4 (With coping), a) 9.5 mtrs poles ( Pole concreting ) (650*500*1850 mm)
Guy concreting CC 1:2:4 (600*600*450 mm)
Supplying and painting of two coats of good quality Red Oxide primer after cleaning and scrapping the surface of I-beam poles.
As above with 2 coats of good quality Aluminium paint after 2 coats of good quality Red Oxide primer of I-beam poles.
Operation and Maintaince of Lift Irrigation Scheme for a period of 5 Years
Operation and Maintenance for I year
Operation and Maintenance for II year
Operation and Maintenance for III year
Operation and Maintenance for IV year
Operation and Maintenance for V year
Construction of 33/6.6kV Electrical Sub station withs 2 Nos of (1 Working & 1stand by) 7.5 MVA Capacity Transformers with Maintenance Tools and Plants including all allied Works
Earth work excavation for foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...
Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete
Earth work excavation for foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Providing hearting / casing embankment using homogeneous approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other op...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing 25 mm dia 2.50 m long cold twisted defomed steel anchor rod with 1.25 m length driven into 38 mm dia hole drilled in bed rock and remaining length embedded in concrete / masonry i...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate i...
Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete
Power Transformer: (HV Side and LV side cable type) power Transformer copper winding. 7.5 MVA, 33/6.6 KV Delta/star, Dynll, 3ph, 50 Hz, Core type winding with OLTC, RTCC, panel, etc., Complete filled ...
Erection of Transformers Moving the Transformer to the plinth. Maximum allowable distance is 50 metres (More than 50 metres approval of D(T) has to be obtained). Considered 100mrs for each transformer...
Assembly of Transformer parts like bushings, radiators, filling oil into Transformer etc., for the total weight of the Transformer
Each Transformer Weight Approximately 10T * 2 = 20MT
Wiring of Transformer marshalling box, Buchholz relay, fixing Thermometer, OLTC up to control panel and assisting in testing and commissioning by RT/MT/Firm Engineers
5 MVA to 6.3/8 MVA Tr.
Testing & Commissioning of Power Transformers
Inspection of wires and Ferrules. Inspection of wiring of Protective Devices, Cooling fans, Oil flow Pumps, OLTC, RTCC
30 kV Normal Duty Metal Oxide lightning arrestor (LA) with surge counter Arrestor (Discharge Class - 2)
Erection of Lightning Arrestor and wiring including movement from the point of unloading to the point of erection. Insulation resistance test, leakage current test, surge counter operation test
33 kV, 2500 A, 25 kA Outdoor Vacuum Circuit Breaker with terminal connector suitable for Al. tube/conductor and mounting structure etc., as per technical specification.
Erection of 33KV Breakers ( a+ b + c)
a. Breaker Erection, assembly,
b. Assisting in Testing and Commissioning
c. Testing & Commissioning: Wiring & Testing
33kV CT's 33 kV Class : 400-200/1-1-1 A
PT's 33 kV/sqrt3, 110V/sqrt3, 110V/sqrt3
Core 1 : Class-3P, 30VA
Core 2 : Class - 0.5, 30VA
Erection of 33KV CT's and PT's ( a+ b + c + d)
a. Breaker Erection, assembly,
b. Assisting in Testing and Commissioning
c. Testing & Commissioning: Wiring & Testing
33 kV, 800 A, 25 kA Upright with Earth Switch complete metallic portion with insulator
For Erection Charges Upright
33 kV, 800 A, 25 kA Upright with out Earth Switch complete metallic portion with insulator
For Erection Charges Upright
For Erection Charges Upright
33KV Line Control Panel
33/6.6 kV Transformer Control Panel
Control and Relay Panel Erection charges
ACSR COYOTE conductor
(26/2.54 mm Al + 7/1.90 mm St), Std Wt: 521 Kg/KM
Support structure for switchyard For Erection
Station structures Tower - 6T1 with peak(.932MT) 6 no's
Station Beams (1B1)(Sl.no II, A ii) (.504MT) - 6 no.s
Lighting arrestor (.147MT) 9no's
Current transformer(.151MT) 12 no's
Potential transformer (.173MT) 6 no's
Isolator (.475MT) 4 no's
SS for Transformer (.218MT) - 2 no.s
SS for Post insulators(.141MT) - 9 no.s
Supply of galvanised Bolts & Nuts
33KV Solid core Insulators
Fixing of Solid Core Insulator
Power Connector , Terminal connectors for clamps for COYOTE conductors
Fire Fighting System
a. Providing ABC Powder based MAP 90, 9Kg
Providing 9kg Fire Extinguisher Mono Ammonium Phos phate Powder 90, Stored Pressure Type, Pressure Gauge, Gross Weight 14.9 ...
Supplying of four bucket stand along with buckets. Complete
CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port UNIDIRACTIONAL (Used for HT Installation, LT Metering Cubicle 50-150 KW).
Supply and Installation / Fixing / Provision of Outdoor typeThermoplastic Modular Panel enclosure with transparentPolycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof,dust proof, water pro...
Supplying, installing,testing and commissioning of dewatering pump, including cost of all materials, machinary,labour,etc.,complete with all leads and lifts ( 15HP) as per budgetory offer
EARTHING:Providing and fixing Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as termi...
Bentonite clay slurry for earthing in 50 Kg Bag etc., complete with all leads & lifts
Digging of Pit for providing GI Pipe type Earthing (Hard Soil) etc., complete with all leads & lifts
Earthwork excavation for trial pits / borrow pits and other investigation works in all kinds of soil including boulders upto 0.30 m dia and disposingoff excavated soil & all necessary works as directe...
Station Yard Lighting & Street lighting at around pump house and roads Fabricating, supplying and erecting swaged tubular pole of height Mtr having three sections, and providing two coats of red oxid...
Supplying & fixing - flexible LED Strip Light ..... W Power consumption in 5 ms length CCT6500 degree K, CRI 70%.efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598,...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Ring spanner set: 12 nos per set
Pipe wrench 24 inches size
Pipe wrench 18 inches size
Double end spanner- 12 nos. per set
Hack saw frame B185
Rubber hand gloves 15 kV tested
Rechargeable 5 W LED Hand Torch
Insulated cutting plier 12 inch size
Insulated cutting plier 8 inch size
Line live tester
Screw driver 18 inches size
Screw driver 12 inches size
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Notification.pdf
Instructions to Tenderers • 0.65 MB
dtp fINAL PHASE 1.pdf
Tender Document • 68.66 MB
6B.pdf
Design Document • 0.56 MB
8A.pdf
Others - DRAWINGS • 45.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .