Replacement of ACSR Weasel to Dog/Rabit Conductor and erecting Mid span Pole

Amount

Annexure -A ( Works )

Cartage of material from store center to work site including loading at store & unloading, at work site safly distrance approx. 40Km. ( Other line small material with conductor.

Cartage of material from store center to work site including loading at store & unloading, at work site safly distrance approx. 40Km. ( P.C.C. Pole 8.5 Mtr. long. )

Cartage of material from store center to work site including loading at store & unloading, at work site safly distrance approx. 40Km. (ST Pole SP 33/35)

Straighting of Tilted 11KV, X-arm with Opening of binding on insulator and Re-binding after completion of work as per direction of Engineer-In-Charge of the work.

Errection of P.C.C. single support after digging of pit andback filling by soil for reducing long span of LT, ABCline and complete in all respect as per RESPO specification and instruction of Engineer In Charge of the work.

Errection of single support after digging of pkits & back filling by soil with grouting of STP-SP-33/35 poles by Ccmixture of ratio 1:4:8 including fitting of all accessories with the cost of required cement, sand, stone grit etc. Complete in all respect as per RESPO specifixcation & instruction of Engineer In Charge of ther work.

Errection & Grouting of stay by digging of pits & grouting of Stay rod by C.C. mixture of ratio 1:4:8 with binding andmuzling stay wire 7/10 SWG including cost of cement, sand and stone grit complete in all respect.

Fixing of M.S. Earthing rod 20x2500mm2 with Earth wire 7/16 SWG complete in all respect as per RESPO specification and instruction of Engineer In Charge of the work.

Loopint-Chooping of Tree brances passing along with the line as per Direction of Engineer-In-Charge of the work.

Straightning of Tilted P.C.C./STP- SP Pole with opening of binding on insulator and Re-binding after completion of work as per direction of Engineer-In-Charge of the work.

Replacement of Damaged Disc insulator, Pin Insulator,Disc Fitting, X-arm and Clamps etc, including opening of binding from insulator and rebinding on insulator with ACSR conducor work complete as per direction of Ebngineer In Charge of the work.

Dismentliong of 11KV. Lines on ACSR Weasel donductor and Re-Rolling of old conductor making bundles and back cartgage of the same from work site to Stone Centre /JE store.

Laying, Spreading,Stringing and sagging of 11KV. Line on ACSR Dog donductor including binding on insulator and final jumpering etc as per direction of Engineer In Charge of the work.

Laying, Spreading,Stringing and sagging of 11KV. Line on ACSR Rabbit donductor including binding on insulator and final jumpering etc as per direction of Engineer In Charge of the work.

Annexure - B ( Supply )

Supply of Stay Clamps, M.S. Clamp made of M.S. Flat of size 50x6mm. Suitable size Nut & bolt duly painted by red ioxide primer . Clamps should be free from any defects like joints, crack, welding and burrs as per sampe . ( Sample may be seen at JE Store Rudrapur )

Supply of F-Type clamps with nut & bolts of M.S. Clamp made of M.S. Flat of size 50x6mm. Suitable size Nut & bolt duly painted by red ioxide primer . Clamps should be free from any defects like joints, crack, welding and burrs as per sampe . ( Sample may be seen at JE Store Rudrapur )

Supply of X- Arm holding clamps with nut & bolts of M.S. Clamp made of M.S. Flat of size 50x6mm. Suitable size Nut & bolt duly painted by red ioxide primer . Clamps should be free from any defects like joints, crack, welding and burrs as per sampe . ( Sample may be seen at JE Store Rudrapur )

Supply of L.T. Shackle Insulator with Nut and bolts.

Supply of L.T. clamps for P.C.C./STP with nut & bolts of M.S. Clamp made of M.S. Flat of size 50x6mm. Suitable size Nut & bolt duly painted by red ioxide primer . Clamps should be free from any defects like joints, crack, welding and burrs as per sampe . ( Sample may be seen at JE Store Rudrapur )

Supply of Bolts and Nuts.

Supply of M.S. Clamps for suspension with nut and bolts. made of M.S. Flat of size 50x6mm. With suitabnle size Nut & bolt duly painted by red ioxide primer . Clamps should be free from any defects like joints, crack, welding and burrs as per sampe . ( Sample may be seen at JE Store Rudrapur )

Supply of Suspension Clamps with I Hook and nut and Bolts complete in all respect with nut & bolts complete As per drawing and UPCL Specification.

Supply of P.G. Clamps suitable for Dog to Dog as per RESPO specification and instruction of Engineer In Charge of the work.

m/s aryan electrical

RAVI CONSTRUCTION CO