T CONSTRUCTION OF COMMUNITY TOILET NEAR THE HO MADHAI BAG S XIX

Page 1 of 315, Item No.-2(a) Earth work in excavation of foundation trenches or derains,in sorts of soil(including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling,dressing and ramming the bottom, bailing out water as required complete. % Depth of excavation not exceeding 1,500 mm.

Page 1 of 315, Item No.-3(a) Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc.layer by layer complete.(Payment to be made on the basis of measurement of finished quantity of work) % With earth obtained from excavation of foundation.

Page 2 of 315, Item No.-A/4 A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity.

Page 14 of 315, Item No.-1 Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Page 23 of 315, Item No.-1[VOLUME -I] Cement concrete with graded jhama khoa(30 mm size excluding shuttering1:3:6 proportion

Page 42 of 315, Item No.-36(a) Hire and labour charges for shuttering with centering and necessary staging upto 4 mtr hight using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams,columns, lintels curved or straight in ground floor

Page 26 of 315, Item No.-10(a) Ordinary cement concrete(mix 3:1.5:1) M-20 with graded stonechips (20 mm down) excluding shuttering and reinforcement if any as per IS 456-2000. pakur/chandi variety in ground floor.

Page 44 of 315, Item No.-40(a)(i)(II) Reinforcement for reinforced concrete in all sorts of structure including distribution bars stirrups, binders, etc. including supply of rods initial straighteining and removal of loose rast cutting to requsite length. hooking and bending etc. all complete in ground floor.(upto 4m)

Page 15 of 315, Item No.-7(a), (b) Brick work with 1st class bricks in cement mortar(4:1) (a)In foundation and plinth

Page 16 of 315, Item No.-16 125 mm thick brick work with 1st class bricks in cement mortar(1:4)

Page 17 of 315, Item No.-21(a) 75 mm thick brick work with 1st class bricks set in cement,sand mortar(1:4) including H.B.netting in every alternate layers.

Page 189 of 315, Item No.-1(ii)(a), (b), (c) Plaster to ( wall,floor,ceilling etc) with sand and cement morter including rounding off or chamfering corners as directed roughening of concrete surface including throtting, nosing & drip course where necessary a) 20 mm thick plaster (6:1) [outside]

(ii)15 mm thick plaster (4:1) [inside]

c)10 mm thick plaster (4:1) [ceilling]

Page 192 of 315, Item No.-15 Neat cement punning about 1.5 mm. Thick in wall, dado,window,sills,floor,drain etc.

Sl. No. 8 Page no. 15 Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement

Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer’s specification and direction of Engineer-in-Charge.

Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.

Page 104 of 315, Item No.-13(iii)(a) M.S.or W.I.Ornamental grill of approved design joints continuously welded with M.S.,W.I. Flats and bars of windows,railing etc.fitted and fixed with necessary screws and lugs. Grill weighing above 10 kg/sq.m and upto 10 kg/sq.m

Page 105 of 315, Item No.-F/15 Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./W.I. gate etc.with point weldin gat not more than 150 mm apart complete in all respect as per design including cost of all labour and materials.

Page 197 of 315 , Item No.-15(iii) Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. Two coats.

(b) Priming one coat on steel or metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Page 200 of 315, Item No.-2(A)(a), Page 200 of 315(b), Item No.-2(A)(b) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc.on the surface,if necessary. With super gloss(hi gloss) Two coats(with any shade except white) (b) On steel or other metal surface :

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer a)1000 litre capacity

Page 79 of 124, Item No.-1 Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing) : 510 mm long

Page 80 of 124, Item No.-B(III)/9 Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with (b) Porcelain of approved make.

Page No.-80 of 124, Item No.-B(III)/6 Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm

Page No.-80 of 124, Item No.-B(III)/6 Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately ). (i) 450 mm X 350 m

Page 80 of 124, Item No.-B(III)/8 Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete (Payment of concrete will be paid seperately). (i) 600 mm X 100 mm (b) White vitreous chinaware

Page No.-13 of 124, Item No.-19(I)(b) Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Concealed Work (a)25 mm dia

(b)20 mm dia

(c)15 mm dia

Page 213 of 315, Item No.-21(A)(ii) Supplying fitting & fixing UPVC pipes A-Type and fittings coforming to IS:13592-1992 with all necessary clamps nails,including making holes in walls,floor

etc.cutting trenches in any soil through masonry concrete structures etc.if necessary and mending good gamages including joining with jointing materials(Spun Yarn Valamoid/ Bitumen/M-Seal etc)complete UPVC Pipes: 110 mm.Dia.

Page 88 of 124, Item No.-3(i)(A) Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. For 10 users

Construction of Soak Pit/Leach Pit