SH 10 to Bagbud_Road_Pot hole repair and and SDBC_0.000 to 2.430

Trimming of grass and weeds from the shoulder / berms and disposal the same to the suitable location as per technical specification Clause 1914 of MORD as per direction of the Engineer in charge

Providing, laying, spreading and compacting graded stone aggregates to wet mixed macadam specification including Premixing the materials with water at OMC in mechanical mix plant,carriage of mixed materials by tripper to site ,laying in uniform layer with paver in sub-base/base course on well prepared surface and conpacting with vibratory roller to achieve the desire dencity as per clause of MoSRT&H Specification for road and bridge works.

Providing and applying Primer Coat with bitumen emulsion SS-1 at the rate of 0.60 kg/sqm on the prepared treated with primer and cleaned as per technical specification for Road and Bridge works.

Providing & applying Tack Coat with bitumen emulsion using emulsion pressure distributor @ 0.25 to 0.30 Kg/ Sqm on prepared bituminous surface using mechanical means as per Clause- 503 of MoSRT&H Specification for Road & Bridge works(4th Revision).

Providing and laying Semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per Clause-508 of MoSRT&H Specification for Road & Bridge works(4th Revision)

Construction of embankment with approaved materials obtained from borrow pits with a lift upto 1.5m transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification clause 301.5