SPECIAL REPAIR TO BUILDING NO P 312 OF ALKAPURI AT CQA SV GE DEHU ROAD

Amount

Taking down plaster from brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water Complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) with WPC on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of concrete in ground floors and paying not exceeding 15cm thick (below of above ground level)

Dismantling of stone slabs of any desc or thk in floors laid and bedded in any mortar

Taking down or up steel water tubing 15mm dia and connections with all fittings/valves in any place, wall, roof, ceiling etc. and removal to store all as specified

All as per item No 5 above but 20mm dia

Supplying and laying of 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Supplying and laying of 25mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Dismantling water tanks and removing to site up to n.exc 500Ltr capacity.

Dismantling water tanks and removing to site exc 500Ltr but n. exc 1000Ltr capacity.

M & L, applying two coats of oil bound distemper over one coat of primer including preparation of newly plastered surfaces of walls complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old treated wooden surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old decorated wall surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and efflorescence salt, oil and greasy spots etc and applying one coat of white wash on wall complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Material and labour for appying two coats of acrylic distemper of approved tint on wall surfaces complete including complete removal of existing treatment all as specified and as directed.

M&L for preparing surfaces plastered or unplastered new surfaces and applying two coats of cement base paint on walls complete all as specified and as directed by the Engr-in-charge.

Material and labour for applying 3 mm thick white cementitious putty on wall and making the surfaces smooth by rubbing with sand paper to achieve finished surface complete all as specified and as directed.

Material and labour for applying 3 mm thick white cementitious putty on ceiling and making the surfaces smooth by rubbing with sand paper to achieve finished surface including complete removal of existing treatment all as specified and as directed.

M&L Cement concrete type D2,1:4:8 (40mm graded agg) 50mm thick in sub base.

Material and labour for double charge dark shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tile exc. 0.18Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material and labour for double charge dark shade vitrified ceramic tiles of size 10 mm thick as in vertical surface, pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L joint free Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile exc. 0.06sqm but not exc. 0.11sqm, in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick screed bed or bedding layer in CM 1:6 for floor

M&L designer glazed ceramic coloured tiles of size 300 x 450 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete, all as specified.

M&L for 20 mm thick Granite ( of any type ) work (table rubbed and polished ) in door , window jambs & cills, cooking platforms and like in CM1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including cutting & polishing complete all as specified and directed.

Material and labour for green marble 10 to 12 mm thick (table rubbed and polished) as in staircases skirting/ border, jointed with grey cement slurry mixed with pigment to match the shade of slab complete all as specified and as directed.

S&F in repair 25mm dia Stainless steel curtain rod with fixing brackets.

S&F in repair Stainless steel fancy type ends for 25mm curtain rod .

S&F in repair Stainless steel fancy type corner for 25mm dia curtain rod .

S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

All as per item No. 44 above but 1000 litres.

S&F in repairs PVC float valve high pressure with polythene float and fly nut complete, screwed for iron pipe of bore 20mm dia or brass ferrule in repairs.

S&F in repairs gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe of bore 25mm dia.

All as per item No. 47 above but 15mm dia.

S&F as in repairs PVC low/high level flushing cistern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing flushing system of CI or any other quality incl brackets and WC, Seat cover and cistern should be of same make).

S & F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated high in device complete

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

Supply and fix in repair brass chromium plated mixer for mixing hot and cold water screwed down high pressure for iron pipe of 15mm bore complete all as specified and as directed.

Material and labour for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

S&F in repairs chromium plated two way bib cock with wall flange 15mm dia Cat No. QQT 7041 of make Jaquar ‘QUEEN'S series or equivalent of make as approved by GE all as specified and as directed.

Supply and fix in repairs, chromium plated long body bib cock with wall flange 15mm dia Cat No. CON-107 KN of make Jaguar ‘CONTINENTAL' series or equivalent of CERA, Prayag as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated single towel rail 600mm long including built in side brackets ,Cat No. AQN-7711 of make Jaquar ‘QUEEN'S Series or equivalent of make as approved by GE all as specified and as directed.

S&F in repairs chromium plated toilet paper holder ,Cat No. AQN-7751 of make Jaquar ‘‘QUEEN'S Series or equivalent of make as approved by GE all as specified and as directed.

S&F in repairs chromium plated soap dish ,Cat No. AQN-7731 of make Jaquar ‘QUEEN'S Series or equivalent as approved by GE all as specified and as directed.

S&F in repairs chromium plated towel ring round, Cat No. AQN-7721 of make Jaquar ‘QUEEN'S Series or equivalent as approved by GE all as specified and as directed.

S&F in repairs chromium plated towel rack, 600mm long with lower hangers,Cat No. AQN-7781 of make Jaquar ‘QUEEN'S Series or equivalent approved by GE all as specified and as directed.

S&F in reapir 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed . Make : Jaguar (Continental series ) or equivalent

Supply and fix in repair chromium plated health faucet with 8mm dia, 1.0 metres long flexible tube and wall hook as approved by GE with chromium plated angular cock 15mm bore with stud complete all as specified and as directed.

Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

M&L PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore dia

M&L Cutting / cleaning away small trees sapling surbs and under growth roots from brick wall, chajjas etc including taking out complete root from from inside wall / chajjas and making good surfaces in cement concrete (1:2:4) type or in CM (1:4) to match the existing surface as specifid.

S&F in repairs PVC connection 15mm dia 45 cm long with 02 Nos.PTMT check nuts with washer complete

Supply and fix in repairs chrome plated overhead shower 120mm dia round shape multi wall flow with cascade effect (ABS body chrome plated with gray face plate) with rubbit cleaning system including connecting rod product code OHS-CHR-1779 of make Jaquar ‘FUSION COLLECTION' Series or equivalent as approved by GE complete all as specified and as directed.

S & F in repairs 32 mm dia PVC waste pipe 60 cm long

S & F in repairs glass shelf 12" Long x 6" wide and thick of glass 8mm fixed in chromium plated frame screwed down for fixing to walls

S&F in repairs double Angular stop cock with wall flange cast copper alloy, chromium plated fancy type with long shank and cup screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed to 15mm bore GI pipe.

S&F, PVC cabinet fancy type of size 460mmx360mm with looking mirror complete(make-PRAYAG/COMMANDER, NILKAMAL).

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including fixing cantilever brack-ets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with 40mm dia CP wast coupling complete.

S&F, in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and as directed.

M&L for preparation of old painted surfaces of letters n.exc 30 cm high and applying one coat of synthetic enamel paint and re-writing of bldg number by different colour complete all as specified and as directed

S&F, in repair 19/20 mm thick pre laminated particle board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinet or fixed with screws to timber frame work, complete all as specified and as directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. (for Kitchen cabinets)

Supply and fix for brass locks, cupboard, grade 1, 75mm size, 4 levers with duplicate keys with brass key hole complete all as specified and as directed.

S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed (for Kitchen cabinets)

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30mm width of flaps (for Kitchen cabinets)

S&F 40 mm dia, mild steel bright finished cup board knobs fixed with nut, screw and washer complete all as spd and directed. (For Kitchen cabinets)

S&F, Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in complete all as specified and as directed. (for Kitchen cabinets)

Demolition of precast concrete block masonry built in cement mortar all as specified.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width type C1 1:3:6 (20mm graded aggregate) and setting in mortar CM 1:6, complete all as specified

M/L hardcore of gauge exc 63mm but n.exc 100mm deposited spread and leveled in layers n.exc 15cm thick watered an reamed to a true surface with broken stone or boulders

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg.) as in plinth protection 75 mm thick finished top surface even and smooth with out using extra cement

M/L for applying bitumen & sand in 1:3 mix for construction joint of road berm etc 10mm wide & depth n.exc 75mm complete

M&L cement concrete type E-2 1:5:10 using 40mm, graded brick agg as in sub base.

M&L for polymer modified bituminous elastomaric water proof coating @ 0.60 Kg per Sqm in two layers for sunken portion of toilet Make: Dr Fixit, Pidilite

M&L for integral water proofing liquid @ 0.30 ltr per Sqm using water proofing compound for plaster & concrete using pidi proof for LW for sunken portion of toilets in plastering vertical surfaces & concreting at the bottom of sunken floor. Make: Dr Fixit, Pidilite.

M&L for 40mm thick PCC type B0, (1:2:4, using 12.5mm graded stone aggregate) as in floor incl water proofing liquid @ 200ml per 50Kg cement. (water proofing liquid to be measured separately) finished even and smooth.

M&L rendering 15 mm thick in cm 1:4 in sunken portion on Brick / stone masonry surfaces, incl water proofing liquid @ 200ml per 50Kg cement. ((water proofing liquid to be measured separately) including finished even and fair.

Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 100/75mm with all fittings .

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 110mm dia pipe

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 75mm dia pipe

S/F (SWR) junction single ( single T) equal or unequal 110mm dia with access door

S/F (SWR) junction single ( single T) equal or unequal 75mm dia with access door

S/F PVC (SWR) vent cowl 110mm dia

S&F PVC (SWR) bend 110 mm dia all as specified and directed

S&F PVC (SWR) bend 75mm dia all as specified and directed

Taking down shutter exc 1.0 but nexc 2.0 sqm

Taking down shutter with frame of area nexc 1.50 Sqm

Taking down shutter with frame of area exc 1.50 Sqm but n.exc 4.0Sqm.

Resecuring or easing & adjusting, without taking down shutter of any description exc 1 Sqm and n exc 2Sqm each complete all as specified and as directed.

S/F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification & drawing

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2004) complete all as specified and as directed.

S/F 30mm thk flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

M&L, 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc, complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm

S/F aluminium anodised handles cast type 150mm long

S&F, 100mm long M.S hinges complete all as specified and as directed.

S&F Aluminium anodized barrel tower bolt 150mm size.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section.

S&F 250mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F,in repairs framed work such as grills, grating etc. with ends of bar shoulder and/or riveted, or forged into spikes, framed guard bar conforming to Fe-410-W (Gde E-250) quality A complete all as specified and as directed.

M&L for 75mm thick PCC type D2 (1:4:8, using 40mm graded stone aggregate) as in sub base complete all as spd and as dirtected.

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick, set , jointed and pointed in neat cement slurry as in floors with grey cement and pigment incl 15mm thick screed bed or bedding layer 20mm thick in cm 1;6 .

Dismantling MS works of any Desc. Not otherwise provided for (Balcony railing)

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conf to Fe-410-w(gde E-250 quality-A) (for Railing at balcony)

Taking down existing treatment of any description and any layer from roof including scraping and roughening old by picking, sweeping clean and washing down to remove dust etc.complete and applying/brushing the cleaned surface with neat cement slurry 3 Kg per Sqm complete.

M & L for reinforced cement concrete(Nominal mix) 1:2:4 Type B-0, (12.5 mm graded stone aggregate) , as in chajjas,steps including form work as in repairs all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound @ 3% by weight of cement for filling depressions if any to receive water proofing treatment (WPC shall be measured & paid seperately)

Supply only integral water proofing compound.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by steps of treatment are as under:- (a) The roof surface shall be thoroughly wire brushed cleaned to eliminate all sharp projection , washed, dried up and cleaned of all foreign material and dust to receive primer (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.25 Kg/Sqm shall be applied. (c) on this primered surface APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.00 Kg/Sqm with plain finish shall be laid by torch application method (d) Apply two coats of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) the overlap of APP shall be done with torch application end lap and side lap will be 100mm each(Note: (i) The contractor/Company shall furnish 10 years performance warranty as per manufacturer of material .Make : STP, Fosroc, Thermax.

S & F 0.50mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including taking out old frame shutter complete all as specified and directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Material and labour for scrapping and removing old paint, stains, loose materials and algae-fungus growth then cleaning of surface with water using pressure washer machine, fill the crack with acrylic based textured cack filler and applying two coats of modified acrylic exterior emulsion paint of approved shade having silicon additives in paint over a coat of primero-primer cum sealer having alkali resistance property diluted with water and mixed with bio block in ration of (5:4:1) complete all as specified and as directed. (Note: (i) The contractor shall furnish 5 years performance warranty as per manufacturer of paint (ii) The work should be done by a company recommended applicator .

M&L Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia,steps etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including applying two coats of weather proof emulation paint incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :Rate for form work if reqd to be incl in the rate quoted by the contractor.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down carefully by old/ damaged/unserviceable unscrewing from boards/outlets boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc complete all as specified.

M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed copper conductor FRLSH cable 650/ 1100 V grade drwn through concealed PVC conduit including tees, junctions etcfixed on wall/ floor/ ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including PVC sunken type terminal box of suitable size with top cover for One Light/ Fan complete all as specified Make : Finolex/Anchor/Polycab

One light point controlled by two way switches

One bell point controlled by one switch

One socket 5 pin 5 Amps flush type on same board

One socket 5 pin 5 Amps flush type on independent board

M&L for Point wiring complete with 4 Sqmm single core PVC insulated but unsheathed copper conductor FRLSH cable 650/ 1100 V grade drwn through concealed PVC conduit thickness not less than 1.8 mm of suitable size as per site requirement including tees, junctions etcfixed on wall/ floor/ ceiling etc including 4.0 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including PVC/ Wooden/Modular metal type terminal box of suitable size with top cover for 16 Amps switch socket controlled by one way switch complete all as specified Make : Finolex/Anchor/Polycab

Material and labour for Sub-main wiring complete with 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor cable 1100 V grade drawn through concealed PVC conduit with wall thickness not less than 1.8 mm incl sunken type pressed steel terminal boxes including 6 sqmm single core PVC insulated but unsheathed copper conductor grade 1100 V grade cable as earth continuity wire complete all as specified. (two run 6 sqmm and one run 6 sqmm) (Make : Finolex/Anchor/Polycab)

Material and labour for Sub-main wiring complete with 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor cable 1100 V grade drawn through concealed PVC conduit with wall thickness not less than 1.8 mm incl sunken type pressed steel terminal boxes including 4 sqmm single core PVC insulated but unsheathed copper conductor grade 1100 V grade cable as earth continuity wire complete all as specified. (two run 4 sqmm and one run 4 sqmm) (Make : Finolex/Anchor/Polycab)

Supply & Fix of Arteor modular mirror/graphic/wood/leather type, white/black/gold/metal finish color switch 1 way, 6 Amps, 1 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/leather type, white/black/gold/metal finish color switch 2 way, 6 Amps, 1 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/leather type, white/black/gold/metal finish color switch 1 way, 16 Amps, 1 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color socket 5 pin 6 Amps, 2 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color socket 5 pin 6/16 Amps, combination type 2 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color Fan regulator 120 Watt w-2 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color Bell push switch 1 way, 6 Amps, 2 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

M & L for Modular Bell, Ding Dong AC. 230 volts, single pole fitting complete. Make- Legrand/ Standard/ Indoasian

M & L 3 terminals Ceiling rose, AC, 230 V, PVC/ polycarbonatecomplete all as specified. Make- Anchor Penta / Cona/ C&S

Supply & fix Modular AC Motor Starter complete with accessories of capacity 32 Amps, 240 V, AC, 50 Hz all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 1 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 2 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 4 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 6 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 8 module complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & fix of metal flush boxes mounting 1/2 module, made of MS chromium plated complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & fix of metal flush boxes mounting 4 module, made of MS chromium plated complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & fix of metal flush boxes mounting 6 module, made of MS chromium plated complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & fix of metal flush boxes mounting 8 module, made of MS chromium plated complete all as specified. Make : Standard Cat IVY CREST of equivalent in Legrand/ Roma/IndoAsian

Supply & fixing in replacement of old tube light fitting with new LED tube light POLYCARBONATE FIXTURE in two optional hanging with ceiling including hanging arrangement and also incl. accessories, high power low heating superflux LEDs, 100 lumen/ watt, 120-270 V AC inbuilt electronic driver, complete all as specified for 18/20 watts LEDs. Make : HPL Cat Pat No NEPTUNE 18W CW or equivalent in Polycab/ Halonix/ Bajaj/philips/ Luker

Supply & fixing in replacement of old tube light fitting with new LED tube light POLYCARBONATE FIXTURE in two optional hanging with ceiling including hanging arrangement and also incl. accessories, high power low heating superflux LEDs, 100 lumen/ watt, 120-270 V AC inbuilt electronic driver, complete all as specified for 9/10 watts LEDs. Make : HPL Cat Pat No NEPTUNE 9W or equivalent in Polycab/ Halonix/ Bajaj/ Philips/ Luker

Supply & fixing in replacement of LED surface/ Recessed mounted SQUARE/ ROUND/OVAL SHAPE down luminair 10 watts Al die cast ed COB fixture in white/ Al, brush finish & complete with electronic driver suitable for MR16 application with 36 degree beam angle and high brightness SMD LEDs P.F. > 0.90, complete all accessories, all as specified. Make : Philips cat pat No. DN092B LED10S-6500PSU WH or equivalent in Halonix/Bajaj/ Luker/ HPL

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection omplete. Make :- Havells/bajaj/Crompton

Supply & fixing in replacement of LEDs Decorative wall mounted dia-cast Al. LED fixture with ivory/white/Gold coating for up-down accent lighting in the module of Xing Hexa/ Penta/ Round/ Square/OVAL of capacity 14/18 Watts complete high power low heating superflux LEDs, 100 lumen/ watt, 120-270 V AC inbuilt electronic driver all as specified. Make : LUKER cat Pat No. LWL108 or equivalent in Philips/ Bajaj/HAVELLS

Supply & fixing in replacement of LED BED Lamp fitting POLYCARBONATE FIXTURE in two optional hanging with ceiling including hanging arrangement and also incl. accessories, high power low heating superflux LEDs, 100 lumen/ watt, 120-270 V AC inbuilt electronic driver, complete all as specified for 12 watts LEDs. Make : Bajaj Cat Pat No. ALPHA 12W WW or equivalent in Philips/Havells

Taking down carefully fan any type complete deposited in MES E/M store complete all as specified.

Supply & Fixing of BLDC Ceiling fan of 1200 mm sweep 3 blade in white/ brown/ Ivory clolor with regulators, with down rod AC single phase, 230 V, 50 Hz, 5 star rating including provision of cable from ceiling rose or connector to ceiling fan complete all as specified. Make: Havells cat pat No. ES 5 or equivalent in Bajaj/ CG/ Polycab Note : Old Fan to be deposited in MES store.

Supply & Fixing of Metallic body Exhaust Fan of size 300 mm sweep, 900 RPM with louvres & shutters and all connected accessories, AC single phase, 230 V, 50 Hz including provision of cable from ceiling rose or connector to exhaust fan complete all as specified. Make : Turbo-Force Havells/Crompton/Bajaj/Polycab

Supply, install, testing & commissioning of Storage type water geyser, electric driven (single phase), capacity 25 Litres, BEE 5 star rated vertical/ horizantal type, Rust proof body, including PTMT pipe for Cold & HOT water from ball valve to inlet & oulet of geyser respectively complete all as specified & directed by Engr-in-charge. Make :- Havells Puro+/ Kenstar Aquaplsh/ Recold Eterno

S & F of 8 way SPN DB made of CRCA sheet, RAL 9003, powder coated for IK-09 double door, IP-43 glazed door, confirms to IS-8623-1, IEC 61439-1&3, 240 v with 200 amps rated bus bar , ready to use DB insulated phase busbar, neutral bar's with shroud's, earth bar, sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates & circuit identification label with provision for DP, MCB/ Isolator/RCCB/RCBO as incomer & SP MCB's as outgoing all as specified Make: L&T cat pat No. DBSPN008GD or equivalent in Legrand/ Schneider/ ABB

S & F of 4 way TPN DB made of CRCA sheet, RAL 9003, powder coated for IK-09 double door, IP-43 glazed door, confirms to IS-8623-1, IEC 61439-1&3, 415 v with 200 amps rated bus bar , ready to use DB insulated phase busbar, neutral bar's with shroud's, earth bar, sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates & circuit identification label with provision for FP, MCB/ Isolator/RCCB/RCBO as incomer & SP MCB's as outgoing all as specified Make: L&T cat pat No. DBTPE004GD or equivalent in Legrand/ Schneider/ ABB

Supply & fix of four pole RCBOS, earth leaking protection F/pi-4 sensitinity 100MA, 63 Amps complete with C/D charactrstic all as specified. Make : Legrand/siemens/schnider/L&T.

Supply & fixing in replacement of MCB TPN (3P+N), 415 Volts, 50HZ, 10KA Brecking capacity, B Curve of capacity 40 to 100 Amp complete all as specified Make : Legrand/siemens/schnider/L&T.

'-ditto- but MCB SPN 40 to 63 Amp, 240 Volts , 10 KA, C Curve (Cat pat No 604969) (Legrand) Make : Legrand/siemens/schnider/L&T.

Supply & fixing in replacement of MCB SP 240 Volts, AC, 50 HZ, 10 KA, B Curve of capacity 6 - 32 Amp complete all as specified Make : Legrand/siemens/schnider/L&T.

-ditto- but SP 40 Amp

M & L for Earthing complete with Galvanised steel earth plate electrode 60 cmx 60 cm x 6.3 mm thick buried bellow ground level connected to galvanised earth lead directely in ground earth pit not less than 3.20 mtr deep wire 4.0 mm dia by means of bolts , nuts, check nuts, and washer of galvanisediron or steel all as shown in electrical plate No-3 SSR Part-1 of 2009 connecting to earthing test point all as specified and directed ,including necessary excavation and earth work in any type of soil ,concre pit CI frame and cover with locking arrangement all as specified and directed by Engr . In charge. Note: Rate quoted deemed to be including excavation by compressor M/C for Soft disintegrated rock to required depth.

S/F in repair Meter box 2mm thick MS sheet powdr coated of size0.8mtr x 0.8mtr X 0.25mtr split in two parts 0.4X 0.8 mtr on top for refixing the meters and 0.4X 0.8 mtr for fixing of MCCB and DB.The top portion should be provided with glass of size 10cm x 10cm infront of each meters to facilited recording of meter reading and including provision of wooden block of suitable size to fix the meters and DBs, door with locking arrangement and box to be fabricated such as the MCBs can be operated form out side including Removing and refixing of meters(4 Nos) and supply and fix the following:- Switch Fuse unit TPN-63 Amps 240 V-01 Nos MCB TPN 240 Volts 63 Amps including connections complete from electric meter - 04 Nos Note:rate quoted also includes fixing of the DB completely on walls with necessary cable for internal wiring in the DB,lugs insulators Etc and making good the disturdbed surface to match with the existing.

Supply & fix in replacement of Modular chargeble Detachable Emergency light complete with input 250V complete all as specified. Make: Standard/ Legrand/ Indoasian

S & Laying in repair/ replacement cable XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with strandad aluminum conducter of following sizes:-

25 Sqmm x 3.5 Core

50 sq mm x 3.5 core

M & L for High density ERW PIPE of pressure rating 6 kgf/cm2 fixed/ laid in complete to walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :-

50 mm dia

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

Soft / loose soil

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

Supply and install, testing and commissioning of FEEDER BOX Outdoor with double door, roof canopy, Angle iron pedstal frame 450 mm high above from ground level housing cucible type, panel working on 440 V 50 Hz AC supply with built in arrangement for Capacitors banks with controllers and switchgear. It shall be extendible at both ends with aluminium busbar. fully compartmentalised dust proof and vermin proof made out of 3.15 mm thick CRCA sheet steel enclosure painted and suitable for outdoor IP-55 Protection, weather conditions as per specification & accommodate the following controls and as shown in single line diagram :- (a) '-do- but 100 Amp 25 KA, Ics=Icu=100% - 2 Nos (b) '-do- but 32 Amp 25 KA, Ics=Icu=100% - 4 Nos (h) Ammeter (0 - 100 A) - 1 No. (j) Voltmeter (0 - 500 V) - 1 No. (k) CTs 100/ 15 ma - 1 Set (l) Busbar 25X5 mm thick - 1 set. Complete wiring of panel, PCC & Installation all as specified.

M & L for Earthing complete with Galvanised steel earth plate electrode 60 cmx 60 cm x 6.3 mm thick buried bellow ground level connected to galvanised earth lead directely in ground earth pit not less than 3.20 mtr by using GI Strip 25 X 4 mm by means of bolts , nuts, check nuts, and washer of galvanisediron or steel all as shown in electrical plate No-3 SSR Part-1 of 2009 connecting to earthing test point all as specified and directed ,including necessary excavation and earth work in any type of soil ,concre pit CI frame and cover with locking arrangement all as specified and directed by Engr . In charge. Note: Rate quoted deemed to be including excavation by compressor M/C for Soft disintegrated rock to required depth.

M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

Supply and Lay pipe galvanised Medium class including fitting complete 40 mm dia

Supply and Lay pipe galvanised Medium class including fitting complete 25 mm dia

Supply and Lay pipe galvanised Medium class including fitting complete 20 mm dia

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

(a) Soft / loose soil

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M&L for MS Work i:e includes material,cutting,welding,other process for shaping of material to get into required shape as per site requirment and fixing on site. Note: Earthwork will be measured and paid separately

D J Construction

Santhi Enterprises

H S TAKHI