Supply and Installation of LAN system at Pareeksha Bhavan,Poojappura Thiruvananthapuram

Amount

Supply and Installation of Layer 2 Manageable 28 port Ethernet Switch which having 24 x 10/100/1000 Mbps + 4 x Gigabit SFP ports, web manageable supporting ipv6 having Switching Capacity: ≥ 50Gbps, 256 MB flash memory, AC 120/230V. Warranty: 3 Year Accepted Make: Allied Telesis, Brocade, Cisco, HP, Juniper, Netgear

Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type Patch Panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Commoscope, Molex, R&M or equivalent

Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with one number of RJ45 keystone socket in the existing CMS/existing PVC Box including termination charges etc. Preferred Make: Actassi, Belden, Commoscope, Molex, R&M or equivalent

Supply of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover dual face plate with two numbers of RJ45 keystone sockets in the existing CMS/existing PVC Box including termination charges etc. Preferred Make: Actassi, Belden, Commoscope, Molex, R&M or equivalent

Supply and Fixing 1 Module PVC Box on surface. Preferred Make: Legrand, Honeywell or equivalent

Supply, laying, certification and documentation of 23 AWG CAT-6 UTP cable through the existing conduit and cassing and capping as required. Preferred Make: Actassi, Belden, Molex, Commoscope, R&M or equivalent

Supply and fixing of 25mm medium PVC ivory conduit/ oval conduit/ capping-n-casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required Preferred Make: Toms, Balco, Espee or equivalent

Supply and fixing of 20mm medium PVC ivory conduit/ oval conduit/ capping-n-casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required Preferred Make: Toms, Balco, Espee or equivalent

Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make: OBO, MK, Legrand, Honeywell or equivalent

Supply and fixing ≥100mm x ≥50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including Cable Divider, External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make: OBO, MK, Legrand, Honeywell or equivalent

Supply and fixing of Cable divider suitable for ≥100mm x ≥50 mm PVC Cable Management System. Approved Make: MK.

Supply and Connecting 3Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Molex, Commoscope, R&M or equivalent

Supply and Connecting 1Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Molex, Commoscope, R&M or equivalent

Supply and Installation of 19'', 6U, Network Rack with ACDB 6 port, cable manager ,PDU etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Supply and Installation of 19'', 9U, Network Rack with ACDB 6 port, cable manager ,PDU etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Dismantiling and Refixing of Existing switches,patch panels,network cables ,information outlets,network racks etc.

Configuration, Testing, Commissioning, Documentation such as network diagram, labelling of information outlets,patch panel,CAT6 cables etc.

Supply and Installation of necessary Electrical accessories for the distribution of KSEBpower to UPS For the Network Racks etc in structured way, including necessary Sockets, Switches, Cables, Electrical PVC boxes etc .

F1 Solutions

Dynatools Hardware Central

ANADEUS SYSTEMS