Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | ABDUL SALAM N L1 | Shana A S L2 |
|---|---|---|---|---|---|
| 1.00Cabin work | |||||
| 1.00 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 154 | kg | 471.73 ₹72,646.42 Lowest | 556.29 ₹85,668.66 |
| 1.00 | 21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). | 10 | kg | 609.65 ₹6,096.5 Lowest | 718.93 ₹7,189.3 |
| 1.00 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 98.38 | sqm | 1,033.84 ₹1,01,709.18 Lowest | 1,219.15 ₹1,19,939.98 |
| 1.00 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | 3.6 | sqm | 1,440.92 ₹5,187.31 Lowest | 1,699.2 ₹6,117.12 |
| 1.00 | 21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete | 3 | each | 488.67 ₹1,466.01 Lowest | 576.26 ₹1,728.78 |
| 1.01 | 21.12.1:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Anodized (AC 15) aluminium tubular handle bar | 6 | no | 557.87 ₹3,347.22 Lowest | 657.87 ₹3,947.22 |
| 1.01 | OD291073/2025-2026:Providing and fixing double action hydraulic Door Closer door weight upto 125 kg, complete as per the direction of Engineer -in- Charge. | 3 | each | 2,341.34 ₹7,024.02 Lowest | 2,761.01 ₹8,283.03 |
| 2.00Civil work | |||||
| 2.00 | OD287490/2025-2026:Demolishing solid block work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 1.53 | cum | 1,846.24 ₹2,824.75 Lowest | 2,177.17 ₹3,331.07 |
Tender Value
₹2.5 L
EMD Value
₹6,345
Closing Date
22 Jun 2026, 5:00 pmClosed
PWD Buildings Sub Division Nedumangad
Office of the Assistant Executive Engineer, PWD Buildings Sub Division, Nedumangad
Provisions included in this estimate are dismantling of solid block work,cabin work ,plastering and painting etc
2026_PWD_856009_1
PWD/BLDG/TR/1611/2026_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
30 days
Nedumangad
Please refer Tender documents.
7 documents required · 7 mandatory
₹560
Yes
₹6,345
Yes
17 Jul 2026
16 Jun 2026
24 Jun 2026
16 Jun 2026
22 Jun 2026
16 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Cabin work | |||||
| 1.001 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | - | kg | - | - |
| 1.002 | 21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). | - | kg | - | - |
| 1.003 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 1 | sqm | - | - |
| 1.004 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | - | sqm | - | - |
| 1.005 | 21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete | - | each | - | - |
| 1.006 | 21.12.1:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Anodized (AC 15) aluminium tubular handle bar | - | no | - | - |
| 1.007 | OD291073/2025-2026:Providing and fixing double action hydraulic Door Closer door weight upto 125 kg, complete as per the direction of Engineer -in- Charge. | - | each | - | - |
| 2Civil work | |||||
| 2.001 | OD287490/2025-2026:Demolishing solid block work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | - | cum | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1446836.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
PreliminaryAgreementcom.pdf
Tender Documents • 0.05 MB
Declaration.pdf
Tender Documents • 0.04 MB
Integritypact.pdf
Tender Documents • 0.09 MB
epayment.pdf
Tender Documents • 0.01 MB
viewsbd.pdf
Tender Documents • 1.63 MB
BOQ_1446836.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .