Construction work of Building in Govt. Degree College, Nanakmatta (U.S. Nagar)

Amount

P/F polyethylene water tank 1000 lit cap.

S/F single pole blanking plate in the existing MCB DB complete etc. as required. (4 no. /MCBDB)

Painting G.I. Pipe with bitumastic paint 25mm dia G.I.Pipe

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.

Painting G.I. Pipe with bitumastic paint 50mm dia G.I.Pipe

P/F M.S. Oxidised fitting for door windows. Handles 100mm

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

P/F PTMT grating 100 mm dia.

S/L following 2 pair, 0.5 sq mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing PVC conduit as required.

P/F M.S. Oxidised fitting for door windows.Handles 125mm

P/L plain 16/0.20 mm twin, FR PVC insulated, PVC flat flexible copper cable on the floor/ wall, or side of the table/ door etc. as required.

S/L co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing PVC conduit as required.

S/L 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.

P/F M.S. Oxidised fitting for door windows. Tower bolt 150x10mm.

Brick on edge in cement mortar 1: 4

Casement stay 300 mm weighing not less than 200 gms.

Applying priming coat on wooden surface.

P/F M.S. Oxidised fitting for door windows. Tower bolt 250x10mm.

S/F 3 pin, 5 amp. ceilling rose on the existing junction box/ wooden block including connection etc. as required

S/F call bell/ buzzer suitable for D.C/A.C single phase, 230 volts, complete as required.

S/F following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. as required.5/6 amps switch

Extra for providing and placing in position 2 Nos. 6 mm dia. M.S. bars at every third course of half brick masonry

P/F PTMT soap Dish Holder having length of 138m 102mm, height of 75mm.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

P/F PVC connection 450X15 mm.

S/F following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. as required. 3 pin 5/6 amp socket outlet

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soils

S/F of following sizes of PVC conduit along with accessories in surface/recess including cuttting the wall and making good the same (20mm)

S/F brass batten/angle holder i/c connection etc. as required.

P/F fittings for Upvc rain water pipe. Shoe (Plain) 110 mm dia.

S/F of following sizes of PVC conduit along with accessories in surface/recess including cuttting the wall and making good the same (25mm)

S/F following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. as required. Telephone socket outlet

P/F fittings for Upvc rain water pipe. Plain bend 110 mm dia.

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame complete in all respect with 4"X4" cove.

Finishing walls with Premium Acrylic Smooth Exterior paint with Silicone additives of required shade with base coat of W.P. cement paint applied @ 2.20 kg/ 10 sqm).

Steel work welded in built up sections/ framed work for railings, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Providing Sand Filling Around Pipe Line.

S/F metal box of 75mmx75mmx60mm deep on recess with suitable size of phenolic laminated sheet cover in front including painting etc. required

Applying oil bound distemper two or more coats.

P/F M.S. Oxidised fitting for door windows. Sliding door bolts.

Filling available excavated earth in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Prepration of sub grade by dressing of surface

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete - Fixed to steel windows by welding.

P/F Hexagonal MS sheet fan box for ceiling fan clamp od internall dia 140mm, 73mm height top lid of 1.5mm thick MS sheet with its top surface hacked, MS clamp shall be made of 12mm dia MS bar bent to shape as per standard design.

P/F fittings for Upvc rain water pipe. Tee 110X110X110 dia.

Painting with synthetic enamel paint two or more coats.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2X1.5 sq.mm. + 1X 1.5 sq.mm earth wire

P/F Upvc door bend 100 mm dia.

Supplying chemical emulsion in sealed containers including delivery as specified - Chlorpyriphos/ Lindane emulsifiable concentrate of 20%.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, with in a lead of 50 m. - All kinds of soil.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (28mm)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2X2.5 sq.mm. + 1X 2.5 sq.mm earth wire

Making Khurras 45x45 cm in C.C. 1:2:4

Providing gola 75X75 mm with C.C. 1:2:4.

Applying antitermite treatment with specified chemicals under floors, sides of foundation

12mm thick C.P. in C.M. 1 : 6 ( 1 cement : 6 fine sand ).

Wiring for light/ power plug with 2x4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing stepped type electronic fan regulator on the existing plate switch box including connections all as dirceted.

P/F PVC clips of approved Design: 110 mm dia.

P/F Upvc R.W.P for disposal on wall surface. 110mm dia.

Providing 15 mm thick cement mortor plastering on internal wall in 1: 6 ( 1 cement : 6 fine sand ) including ladder, scaffolding etc and supply of all labour, T&P etc required for proper completion of the work.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). Centering and shuttering Foundation, footing bases of Col.

6 mm C.P. 1:3 (1 cement: 3 fine sand) finished with a floating coat of neat cement.

Excavating trenches for Pipes, cables etc. not exceeding 80 mm dia.

12mm C.P. finished with a floating coat of neat cement in cement mortar 1:4( 1 cement : 4 fine sand)

P/F GI pipes and fittings of medium class on surface of the walls with MS clamps complete. 20 mm nominal bore.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2X6 sq.mm. + 1X 6 sq.mm earth wire

P/F Upvc terminal guard 100 mm dia

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing brass ball cock 20mm dia.

P/L G.I. Pipe 25mm Dia.

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

S/F suitable size GI box with modular plae and cover in front on surface or in recess, including providing and flxing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.

P/F brass ferrule with C.I. mouth cover including boring and tapping the main (i) 25mm dia.

Disposal of surplus excavated soil as directed, within a lead of 10 km

P/F CP brass bib cock 15mm nominal bore

Providing and fixing brass gate valve 20mm dia.

Providing MS foot rest including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 as per standard design. (i) with 20x20mm square bar

P/F GI pipes and fittings of medium class on surface of the walls with MS clamps complete. 25 mm nominal bore.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2X10 sq.mm. + 1X 10 sq.mm earth wire

P/F C.P. brass angle stop cock 15mm nominal bore

P/F GI pipes and fittings of medium class concealed in wall chases and repairing with cement mortar. (i) 15mm NB.

S/F suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and flxing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required

S/F 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for lighting and other loads Single pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing brass gate valve 25mm dia.

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with/ without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with adjustable lugs with split end tail to each jamb.

Providing and fixing shalitex board 12mm thick

P/F CP brass concealed stop cock 15mm dia

P/F PTMT towel rail complete with brackets fixed to wooden 450mm long towel rail

P/L PVC Waste Pipe 150 mm dia (6kg/CM2 pressure)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). Centering and shuttering For Beam, Lintel etc.

Making plinth protection 50mm thick with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over bed of 75mm thick brick aggregate grouted with fine sand properly rammed complete.

P/L G.I. Pipe 50mm Dia.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). Centering and shuttering WC

P/L 150 mm dia Upvc pipe with pressure 6kg/CM2 for sewer line

P/F C.P. brass long body cock 15mm nominal bore

Providing and fixing brass gate valve 40mm dia.

Walls (any thickness) including attached pilasters,butteresses, plinth and string courses etc.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). Centering and shuttering P/L RCC M-25 grade for slab etc.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). Centering and shuttering Shuttering for column. (as per s.no- 3.2)

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissoning etc. as required.. 40 amps

P/L 52 mm thick C.C. flooring with concrete hardener topping, under layer 40 mm thick C.C. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Excavating trenches for Pipes and Cable for Pipe Line Laying. Exceeding 80 mm dia. but not exceeding 300 mm dia.

P/F Gunmetal gate valve 50mm dia

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissoning etc. as required.. 63 amps

P/F Upvc nahani trap 100x100mm dia

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.

Half brick masonry with bricks of 1 st class in superstructure in cement mortar 1 : 4 ( 1 cement : 4 coarse sand )

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

P/L C.C. 1 : 5 : 10 alround Upvc pipes 150mm dia

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement

P/F Gunmetal Non return valve 50mm dia

P/F in position pre cast RCC manhole cover and frame of required shape and of approved quality. Rectangular shape 600x450mm internal dimensions

Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. Group-B

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc

P/F 600x450 mm bevelled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joint with white cement & matching pigments etc. complete.

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineerin- Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

P/F White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing SW gully trap 100x100mm

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineerin-charge and panelling with panels of : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPTI, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade 1, Type - II marked :

P/L C.C. of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size)

Brick work with bricks of Ist class in foundation and plinth in cement mortar 1 : 6 ( 1 cement : 6 coarse sand ).

Providing & laying P.C.C. M10 in found. & plinth, bases of columns etc. (a) 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size).

Brick work in foundation and plinth in: cement mortar 1 : 4 ( 1 cement : 4 coarse sand ).

Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt ) as required.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

P/F white vitreous china pedestal type W.C.(European type)

Providing & laying P.C.C. in found. & plinth, bases of columns etc. (a) 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 40 mm nominal size).

Extra depth for masonry M.H 90X80X45cm

P/L RCC 1 :1½ : 3 in foundation, column footings, raft etc excluding shuttering and steel work.

Brick work with bricks of 1st class in superstructure in cement mortar 1 : 6 ( 1 cement : 6 coarse sand )

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). P/L RCC M-25 grade in foundation and footing etc.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). P/L RCC M-25 grade for columns etc. in super structure.

Using R3 series with frame (85 mm & above) x (40 mm & above) & glazed sash (30 mm & above) x (55 mm & above) & fly screen sash (20 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system.(Height upto 1.8 metre)

S/F way, three pole and neutral, prewired, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with loose wire box, terminal blocks, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted i/c earthing etc. as required. (But without MCB /RCCB/lsolator) 8 way (4 +24), Double door,

P/F RCC 1:1.5:3 in walls of any thickness

Making M.H. of size 90X80X45 cm in cement mortar 1 : 5 i/c RCC cover with CI frame and cover etc. complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete - Thermo-Mechanically Treated bars of grade Fe-500D or more.

Supplying and stacking of broken stone aggregate. Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.

Using Gravel mix soil Gravel/Soil-Aggregate Surface Course 4-3-1 Gravel/Soil-Aggregate Surface Course (Table 400.3) Construction of granular surface course by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 402

Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. (By Mechanical Means with 1 km lead)

Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Cement Concrete (PCC M-30) Pavement:- Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

Providing and Laying of Interlocking Concrete Block Pavements of M-40 Grade having thickness 80 mm as per drawings and Technical Specification Clause 1504.

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation and open area etc. complete.

Supplying,fixing& Installation of surface mounted circular 18 watt LED light

Supply & Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting (Type T5)of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. Cat. TCS 350/228 EBE M1 PHILIPS

Supplying of Decorative Ceiling light fittings with thermoplastic High Impact Compact fitting in CFL 18 watt complete all in respect. Model No. FCS 518/218 LOTUS

Development of tube well as per quotation closed.

Supply and Wiring for 250 volts single phase and neutral 2 Nos 6 amps socket outlate with control by 1 No switched with 2.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or surface mounted 25 mm dia 2mm thick PVC conduit including providing and fixing of 6 amps 3 pin switch socket outlet of aprpoved make and design in 2 mm thick GI box with grid plate and earthing of third pin of the socket with 2.5 Sq. mm PVC insulated copper conductor stranded flexible FRLS wire.(maximum four no. of switches socket shall be connected on one circuit)

Supplying and fixing 20 A, 220 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Supplying and installation, testing and commissioning of 40 w surface tube light complete all respect.

Supply & Installation of exhaust fan in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required. Orient Make Airex Exhaust Fan (450x450)

Supply & Installation of exhaust fan in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required. Orient Make Airex Exhaust Fan (300x300)

Supplying of bracket Light (QCZ 802 Philips make) with lamp

S/F, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. as required. (1200 mm sweep) Orient make Model NEW BREEZE.

Supplying of Mirror light 1x11Watt T-5

Recess Mount IP20 2x2 LED Tile of 30-36W having minimum 120lm/W . LM79-08 Report from authorized NABL Lab required to verify system lumen output. Luminaire housing should be made of Powder coated CRCA with PC diffuser. CCT of Luminaire 5700K with ANSI Binning, CRI >80Ra. LED Used should have a life of 50000 hrs@L70. LM80 Report should be provided to verify life span of LED. LED Driver Should be Isolated type constant current APFC and have I/P voltage range of 150-270Volts, THD - <10%, PF - 0.95, Surge protection - 2KV, Driver Efficiency 85% and should have O/P Short Circuit protection, O/P open circuit protection, O/P over load protection. Product Should be BIS Approved. Reports Required - LM79/ LM80/ Photobiological Safety report.

surface Mount IP40 LED Downlighter of 18-20W having minimum 120lm/W. LM79-08 Report from authorized NABL Lab required to verify system lumen output Luminaire housing should be made of Powder Coated aluminum pressure die casting with diffuser to reduce glare. CCT of Luminaire 5700K with ANSI Binning, CRI >80Ra. LED Used should have a life of 50000 hrs @ L70. LM80 Report should be provided to verify life span of LED. LED Driver Should be Isolated type constant current APFC and have I/P voltage range of 90-265Volts, THD - <10%, PF - 0.95, Surge protection - 2.5KV, Driver Efficiency 85% and should have O/P Short Circuit protection, O/P open circuit protection, O/P over load protection. Product Should be BIS Approved. Reports Required - LM79/ LM80/ Photobiological Safety report.

Supplying, installation, testing and commissioning of Flood light IP66 LED fitting suitable for 110 watt having system lumen output of minimum 12000 lumens complete with all accessories and lamp. PF better than 0.95, CRI better than 70 complete with all accessories.

Supplying, installation, testing and commissioning of Bollard light fitting suitable for 10 watt IP 65LED having system lumen output of minimum 900 lumens complete with all accessories and lamp.

Supplying, installation, testing and commissioning of Gate light fitting suitable for 40 watt IP 65LED having system lumen output of minimum 4000 lumens complete with all accessories and lamp.

Supplying, installation, testing and commissioning of 70W LED Street Light IP66 LED with High performance having system lumen output of minimum 6000 lumens, contemporary designed housing made of die-cast aluminium, with street optic LENS for uniform light distribution. PF better than 0.9, CRI better than 70 complete with all accessories.

Providing and erection of hot dipped galvanized octagonal poles in single section made from 3mm thick sheet having lockable weather proof flush door junction box, suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade) complete, erected in an approved manner on provided foundation. ( 7 meter height, 130 X 70mm A/F, 220x220x12mm base plate, 4 nos. X 20 x 700mm bolt.) single arm pole

Providing and erection of hot dipped galvanized octagonal poles in single section made from 3mm thick sheet having lockable weather proof flush door junction box, suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade) complete, erected in an approved manner on provided foundation. ( 7 meter height, 130 X 70mm A/F, 220x220x12mm base plate, 4 nos. X 20 x 700mm bolt.) Double arm pole

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 4 X 6 sq. mm

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 4 X 10 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 6 sq. mm (28mm)

EXTERNAL LIGHTING PANEL(Outdoor Type weather proof, double door with canopy and suitable MS Structure stand duly painted) I/C 63AMP FP MCCB BUS BAR 100 AMP OUTGOING 40A TP MCB-6 NO

rock constructions and electricals (BID ID -394192)

VAAYU PUTRA CONSTRUCTION (BID ID -394224)