C/O New Additional block in CHC building at Nagrota Surian, Tehsil Jawali Distt. Kangra (HP) (SH- Providing EI therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (Make:- Legrand (Myrius), L&T(Oris), Anchor (Roma Plus)

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (Make:- Legrand (Myrius), L&T(Oris), Anchor (Roma Plus)

Group C.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. Make:- Legrand (Myrius), L&T (Oris), Anchor (Roma Plus)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. Make:- Legrand (Myrius), L&T (Oris), Anchor (Roma Plus)

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. (Make:- KEI, Polycab, Finolex, Havells)

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. (Make:- KEI, SCI,Polycab, Finolex, Havells)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. (Make:- KEI, SCI,Polycab, Finolex, Havells)

2x1.5 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

2x16 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Make:- KEI, SCI,Polycab, Finolex, Havells)

PVC insulated HRFR LS Copper conductor 1.5 Sq. mm.

3x1.5 Sq. mm.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. (Make:- KEI, SCI,Polycab, Finolex, Havells)

Wiring for circuit / sub-main with 3x25+1x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (3x25+3x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. (Make:- KEI, SCI,Polycab, Finolex, Havells)

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep (Make: Bajaj, Usha, Havells)/ Equivalent

Providing and fixing the louvers/shutters complete with frame for exhaust fans of all sizes complete with fixing including making good the damages etc. as required complete in all respects.

Providing, Installation, testing and commissioning of ceiling fan with modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. Make: Usha Technix Plus, Anchor Ignite or any other as approved by Engineer-in-charge.

Ceiling Fan 1200 mm sweep (Make: Usha, Model: Technix Plus 3 star rating)/ Equivalent

Providing, Installation, testing and commissioning of ceiling fan with step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. Make: Usha Energia ISI/ Anchor Penta Turbo or any other as approved by Engineer-in-charge.

Ceiling Fan 1400 mm sweep (Make: Usha Energia ISI 1 star rating)/ Equivalent

Providing and installation of wall fan of following size by means of suitable rag-bolt/ nuts, connections, testing and commissioning etc. as required complete in all respects to the best satisfaction of Engineer-in-charge. Make: Usha, Bajaj, Anchor or any other equivalent as approved by Engineer-in-charge.

Wall Fan, 400 mm sweep

Makes:- Usha (Helix High Speed), Bajaj (Midea BW 2200), Anchor (Cindrella wall CW -01)

Supplying & fixing following type of Surface mounted luminaires, white power coated CRCA housing diffusser to avoid glaire,it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion < 20% and efficacy > 100 Lumens per watt, CRI rating> 70 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Panasonic, Bajaj, Jaquar or any other approved by Engineer-in-charge.

LED Batten 20W, 4 feet long (Make: Panasonic, Cat no.PBTM08208)/ equivalent

Providing and installation of following type of Surface mounting Square type LED down light luminaire CCT(K)- 6500 with specifications i.e. Power factor > 0.9 , Harmonic Distortion < 20% and efficacy > 100 lumens per watt, CRI rating>80, suitable for lnput voltage: AC 220-240 V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. Make: Jaquar/Bajaj/Panasonic or any other as approved by Engineer-in-Charge.

LED Down Light 18 watt, (Make: Jaquar, Cat no LNRO02S018SC) 6500K/ Equivalent

Providing and installation of following type of Surface mounting Rectangular type LED panel light luminaire 3840 lumens CCT(K)- 5700 with specifications i.e. Power factor > 0.9, Harmonic Distortion < 10% and efficacy > 120 lumens per watt, CRI rating>80, suitable for lnput voltage: AC 220-240 V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. Make: Twinkle/ C&S/Bajaj/ Jaquar or any other as approved by Engineer-in-Charge.

LED Panel Light 32 watt 1'x2' , (Make: Twinkle Cat no LUXOTICA-PL-004- (S) 5700K/ Equivalent

Providing and installation of following type of Surface mounting Rectangular type LED panel light luminaire 4320 lumens CCT(K)- 5700 with specifications i.e. Power factor > 0.9 , Harmonic Distortion < 10% and efficacy > 120 lumens per watt, CRI rating>80, suitable for lnput voltage: AC 220-240 V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. Make: Twinkle/ C&S/Bajaj/ Jaquar or any other as approved by Engineer-in-Charge.

LED Panel Light 36 watt 1'x4' , (Make: Twinkle Cat no LUXOTICA-PL-002- (S) 5700K/ Equivalent

Providing and installation of following type of Surface mounting Square type LED panel light luminaire 2880 lumens CCT(K)- 5700 with specifications i.e. Power factor > 0.9 , Harmonic Distortion < 10% and efficacy > 120 lumens per watt, CRI rating>80, suitable for input voltage: AC 220-240 V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. Make: Twinkle/ C&S/Bajaj/ Jaquar or any other as approved by Engineer-in-Charge.

LED Panel Light 24 watt 1'x1' , (Make: Twinkle Cat no LUXOTICA-PL-003- (S) 5700K/ Equivalent

Supplying & fixing following type of Surface mounted luminaires, white power coated CRCA housing diffusser to avoid glaire, it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion < 10% and efficacy > 120 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. Makes: Twinkle/ Bajaj/ Jaquar or any other as approved by Engineer-in-Charge.

LED Panel 2'x2' 36 watt (Make:- Twinkle cat no LUXOTICA-PL-001-(S) (5700K)/ Equivalent

Providing and fixing of LED 30 watt street light luminaries of Panasonic having cat No. /ordering code PSTM 27308, powder coated pressure die-cast aliminium heat sink and toughened glass SMDLED streetlight with heat resistant toughened glass it should be compatible with specification i.e. power factor ≥ 0.9, Harmonic Distortion < 20% and efficacy ≥ 100 Lumens per watt, CRI rating> 70 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commisioning etc. as required. Make:- Panasonic/ Philips/ Bajaj/ Jaquar or any other approved by Engineer-In-Charge.

Street light fixture 30 watt LED with Lens , Make Panasonic (Cat No. PSTM 27308) , 5700K/ Equivalent

Providing and fixing LED Bulk head of following rating with pressure die casting aluminium housing and it should be compatible with specification i.e. Power Factor ≥ 0.9, Harmonic Distortion <20% and efficacy ≥ 100 Lumens per watt, CRI rating> 70 suitable for input voltage: 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. Makes: Panasonic/ Bajaj/ Philips/ Jaquar or any other approved by Engineer-in-charge.

10 Watt, Bulk Head LED

Makes:-Panasonic, Bajaj, Philips, Jaquar, {at par with Panasonic cat no. PBHM01107 }

Providing and fixing following type of LED Wall bracket light coated CRCA Sheet steel housing, diffuser to avoid glaire, with specifications i.e. Power factor > 0.9, Harmonic distortion < 10% and efficacy > 100 lumens per watt, CRI rating>80 suitable for input voltage AC 220-240V, 50/60 HZ, including P/F LED Bulb 9 watt B22 base CDL complete with all accessories, connections testing and commissioning as required.

Wall Light 9 W x1 LED

Makes:- Havells/ Philips/ Bajaj/ Panasonic {at par with Havells cat no. LHDL06160099)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

25 Liter capacity water heater (Cat-A) (Make:- Usha, Racold, Bajaj)

35 Liter capacity water heater (Cat-A) (Make:- Usha, Racold, Bajaj)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A. (Make:- L&T, Legrand, Schneider)

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A. (Make:- L&T, Legrand, Schneider)

63 Amps. Cat-A. (Make:- L&T, Legrand, Schneider)

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A. (Make:- L&T, Legrand, Schneider)

63 Amps. Cat-A. (Make:- L&T, Legrand, Schneider)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A. (Make:- L&T, Legrand, Schneider)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single door-4 way (Make:- L&T, Legrand, Schneider)

Double door-4 way (Make:- L&T, Legrand, Schneider)

Double door-8 way (Make:- L&T, Legrand, Schneider)

Double door-12 way (Make:- L&T, Legrand, Schneider)

Double door-16 way (Make:- L&T, Legrand, Schneider)

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and laying earth connections from earth electrode with 6 SWG (4 mm dia.) copper Wire in 15 mm dia. G.I. pipe from earth electrode etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Riveting, sweating and soldering of copper/ G.I. tape ( with another copper/G.I. tape, base of the finial or any other metallic object) as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Supplying and fixing of following sizes of steel conduit along with the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- (Make: Diplast, BEC, Finolex)

25 mm. dia

50 mm. dia

S/F of 75 mm dia PVC-U rigid pipes 6 KGF/CM along with the accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. (Make: Diplast, BEC, Finolex)

75 mm. dia

Supplying and fixing electrical switch board having 1 No of 25 Amps. Modular switch with indicator & Socket on suitable size GI modular box of 3 modules on surface or recess with modular base and cover plate for modular switches i/c providing and fixing 1 No. of modular 25 amp. socket outlet and modular switch, connections etc. as required. Make:- Legrand (Myrius), L&T(Oris), Anchor (Roma Plus)

Supplying and fixing electrical switch board having 3 No of 5 Amps. Modular switch & Socket on suitable size GI modular box of 12 modules on surface or recess with modular base and cover plate for modular switches i/c providing and fixing 3 No. of modular 5 amp. socket outlet and modular switch, complete with connections etc. as required. Make:- Legrand (Myrius), L&T(Oris), Anchor (Roma Plus)

Supplying & fixing Modular blanking plate on the existing modular metal box as required:-

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-

40 mm dia. G.I. pipe, heavy class

Supplying and fixing extra down rod of 10 cm length G.I. pipe; 15 mm dia; heavy gauge including painting etc.as required. ( Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored):-

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-(Make:- KEI, Polycab, Finolex, Havells)

Armoured cable 300 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-(Make:- KEI, Polycab, Finolex, Havells)

Armoured cable 300 sq. mm (3.5 core)

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron (50 mm x 50 mm x 6 mm thick) with sufficient numbers of horizontal and vertical intermediate members (25mm x 6mm thick) flat iron including painting and bonding to the existing earth as required:-

Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required.

63 Amp. Category-A (Make:- L&T, Legrand, Schneider)

Providing and fixing Aluminium Composite Panel Sheet for exhaust fan as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, unarmoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-(Make:- KEI, Polycab, Finolex, Havells)

Unarmoured cable 50 sq. mm (3.5 core)

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Supplying and erection of L.T. Panel board of suitable size cubical, weather, dust and vermin proof fabricated outof CRCA sheet steel suitable size thickness complete MCCB panel board should be manufactured and supplied by ISO 9001 certified OEM. The busbar system should be duly type tested at NABL lab for short time with stand current of 1 second, it should be suitable for wall or floor mounting with double door option, panel board enclosure should be robust construction and corrosion resistance, powder coated with seven tank process with locking arrangement, fixed on suitable size foundation 60 cm above the ground level by providing angle iron of 50x50x6 mm welded on all four corners embedded in PCC 1:2:4 using 20mm graded stone aggregate up to 30 cm including electrical connections with lugs and glands complete with installation, testing and commissioning etc. including the cost of copper alloy bus bar, digital type Ammeter,Voltmeter, modules and three phase indicating lamps as required complete in all respects. The panel should be approved/tested from the CPRI lab and should be confirmed to IS:64139. (Make: EVA/ Power System & Controls/ DV Electromatic Pvt. Ltd./ or equivalent).

Main LT Panel

Supply, fabricating, installing, testing, commissioning and electrically connected Factory (CPRI approved) made LT panel board of approved size as recommended by IS & CPRI norms, indoor type, floor mounted 1100 Volts, made out of CRCA sheet 2.0 mm thick for load bearing and 1.6 mm thick for non- load bearing, fully compartmentalised, with IP-54 (certificate not older than 2 years) protection with 5mm thick channel for frame, for 415 volts, 3 phase, 4 wire AC supply, complete all as specified including provision of following accessory/ components housed in it :-

630 Amp rated copper bus bar with colour code TPN mounted on epoxy insulators - 01 set (set of 04 bus bars)

Digital Multifunction meter 0-630 Amp with suitable CTs - 01 set (Make: L&T)

LED indicating lamp (set of three) - 01 set

Internal wiring with 1100 volt grade unsheathed PVC insulated copper conductor of suitable size cable as per colour coding or suitable size of bus bar for all connections with suitable lugs as required and as specified.

Earthing terminals and cable glands.

Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.

Switchgear:-

Main Incomer:-

Manual Changeover 400 Amps, 4 Pole

MCCB 400 Amps, 4 pole, Microprocessor based, rupture capacity 35 KA - 01 No. (With spreader Link) (Make: L&T)

SPD (Surge protection device) Type 1+2 , 3P+N, 15 KA - 01 No. (Make: Phoenix)

Outgoing:-

MCCB 100 Amps, 4 pole 25 KA, Adjustable thermal setting - 04 Nos (Make: L&T)

MCCB 160 Amps, 4 pole 25 KA, Microprocessor setting - 01 No (Make: L&T)

MCCB 63 Amps, 4 pole, 10 KA, Adjustable thermal setting - 01 No. (For Yard Light) (Make: L&T)

Sub LT Panel 100 Amps (Ground Floor)

Supply, fabricating, installing, testing, commissioning and electrically connected Factory (CPRI approved) made LT panel board of approved size as recommended by IS & CPRI norms, indoor type, floor mounted 1100 Volts, made out of CRCA sheet 2.0 mm thick for load bearing and 1.6 mm thick for non- load bearing, fully compartmentalised, with IP-54 (certificate not older than 2 years) protection with 5mm thick channel for frame, for 415 volts, 3 phase, 4 wire AC supply, complete all as specified including provision of following accessory/ components housed in it :-

100 Amp rated copper bus bar with colour code TPN mounted on epoxy insulators - 01 set (set of 04 bus bars)

Digital Multifunction meter 0-100 Amp with suitable CTs - 01 set (Make: L&T)

LED indicating lamp (set of three) - 01 set

Internal wiring with 1100 volt grade unsheathed PVC insulated copper conductor of suitable size cable as per colour coding or suitable size of bus bar for all connections with suitable lugs as required and as specified.

Earthing terminals and cable glands.

Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.

Switchgear:-

Main Incomer:-

100 Amps, 4 pole 25 KA, Adjustable thermal setting MCCB - 01 Nos (with spreader links) (Make: L&T)

Outgoing:-

63 Amps. DP Isolator- 04 Nos (Make: L&T)

Sub LT Panel 100 Amps (First Floor)

Supply, fabricating, installing, testing, commissioning and electrically connected Factory (CPRI approved) made LT panel board of approved size as recommended by IS & CPRI norms, indoor type, floor mounted 1100 Volts, made out of CRCA sheet 2.0 mm thick for load bearing and 1.6 mm thick for non- load bearing, fully compartmentalised, with IP-54 (certificate not older than 2 years) protection with 5mm thick channel for frame, for 415 volts, 3 phase, 4 wire AC supply, complete all as specified including provision of following accessory/ components housed in it :-

100 Amp rated copper bus bar with colour code TPN mounted on epoxy insulators - 01 set (set of 04 bus bars)

Digital Multifunction meter 0-100 Amp with suitable CTs - 01 set

LED indicating lamp (set of three) - 01 set

Internal wiring with 1100 volt grade unsheathed PVC insulated copper conductor of suitable size cable as per colour coding or suitable size of bus bar for all connections with suitable lugs as required and as specified.

Earthing terminals and cable glands.

Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.

Switchgear:-

Main Incomer:-

100 Amps, 4 pole 25 KA, Adjustable thermal setting MCCB - 01 Nos (with spreader links) (Make: L&T)

Outgoing:-

63 Amps. DP Isolator- 04 Nos (Make: L&T)

Sub LT Panel 160 Amps (Second Floor-A)

Supply, fabricating, installing, testing, commissioning and electrically connected Factory (CPRI approved) made LT panel board of approved size as recommended by IS & CPRI norms, indoor type, floor mounted 1100 Volts, made out of CRCA sheet 2.0 mm thick for load bearing and 1.6 mm thick for non- load bearing, fully compartmentalised, with IP-54 (certificate not older than 2 years) protection with 5mm thick channel for frame, for 415 volts, 3 phase, 4 wire AC supply, complete all as specified including provision of following accessory/ components housed in it :-

160 Amp rated copper bus bar with colour code TPN mounted on epoxy insulators - 01 set (set of 04 bus bars)

Digital Multifunction meter 0-200 Amp with suitable CTs - 01 set

LED indicating lamp (set of three) - 01 set

Internal wiring with 1100 volt grade unsheathed PVC insulated copper conductor of suitable size cable as per colour coding or suitable size of bus bar for all connections with suitable lugs as required and as specified.

Earthing terminals and cable glands.

Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.

Switchgear:-

Main Incomer:-

160 Amps, 4 pole 25 KA, Microprocessor setting MCCB - 01 Nos (with spreader links) (Make: L&T)

Outgoing:-

63 Amps. DP Isolator- 04 Nos

63 Amps, 4 pole, 10 KA MCB- 01 No (For Autoclave)

Sub LT Panel 100 Amps (Second Floor-B)

Supply, fabricating, installing, testing, commissioning and electrically connected Factory (CPRI approved) made LT panel board of approved size as recommended by IS & CPRI norms, indoor type, floor mounted 1100 Volts, made out of CRCA sheet 2.0 mm thick for load bearing and 1.6 mm thick for non- load bearing, fully compartmentalised, with IP-54 (certificate not older than 2 years) protection with 5mm thick channel for frame, for 415 volts, 3 phase, 4 wire AC supply, complete all as specified including provision of following accessory/ components housed in it :-

100 Amp rated copper bus bar with colour code TPN mounted on epoxy insulators - 01 set (set of 04 bus bars)

Digital Multifunction meter 0-100 Amp with suitable CTs - 01 set (Make: L&T)

LED indicating lamp (set of three) - 01 set

Internal wiring with 1100 volt grade unsheathed PVC insulated copper conductor of suitable size cable as per colour coding or suitable size of bus bar for all connections with suitable lugs as required and as specified.

Earthing terminals and cable glands.

Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.

Switchgear:-

Main Incomer:-

100 Amps, 4 pole 25 KA, Adjustable thermal setting MCCB - 01 Nos (with spreader links) (Make: L&T)

Outgoing:-

63 Amps. DP Isolator- 03 Nos (Make: L&T)

Sub LT Panel 100 Amps (Third Floor)

Supply, fabricating, installing, testing, commissioning and electrically connected Factory (CPRI approved) made LT panel board of approved size as recommended by IS & CPRI norms, indoor type, floor mounted 1100 Volts, made out of CRCA sheet 2.0 mm thick for load bearing and 1.6 mm thick for non- load bearing, fully compartmentalised, with IP-54 (certificate not older than 2 years) protection with 5mm thick channel for frame, for 415 volts, 3 phase, 4 wire AC supply, complete all as specified including provision of following accessory/ components housed in it :-

100 Amp rated copper bus bar with colour code TPN mounted on epoxy insulators - 01 set (set of 04 bus bars)

Digital Multifunction meter 0-100 Amp with suitable CTs - 01 set (Make: L&T)

LED indicating lamp (set of three) - 01 set

Internal wiring with 1100 volt grade unsheathed PVC insulated copper conductor of suitable size cable as per colour coding or suitable size of bus bar for all connections with suitable lugs as required and as specified.

Earthing terminals and cable glands.

Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.

Switchgear:-

Main Incomer:-

100 Amps, 4 pole 25 KA, Adjustable thermal setting MCCB - 01 Nos (with spreader links) (Make: L&T)

Outgoing:-

63 Amps. DP Isolator- 04 Nos (Make: L&T)

Malhotra Associates

JAGJIT RAI