A/R and M/O to Rest House building at Paonta Sahib, Tehsil Paonta Sahib. (SH- Repair and maintenance of Quarter No. 2, 3, 4, 5, 6, 7, 8, 9, 10, meeting hall, 11, 12, 13 and 14.)

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave,asts etc. complete and stacking within 50 metresOf area 3 sq. metres and below, including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete,With cement mortar 1:4 (1 cement : 4 fine sand, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood, with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 250x16 mm with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete 250*10mm with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete 125 mm,with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in elves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately 18 mm thickwith in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and fixing 25 mm thick shutters for cup board etc.panelled or panelled & glased shutters: Second class teak wood including ISI marked anodised aluminium but hinges with necessary secrews,with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Polishing on wood work with ready mixed wax polish of approved brand and manufacture within all leads &lifts as per entire satisfaction & direction of Engineer-in -charge

Painting steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture within all leads &lifts as per entire satisfaction & direction of Engineer-in -charge

Finishing with Deluxe Multi surface paint system for interiors and exterior using Primer as per manufacture specifications :Painting wood work with Deluxe Multi Surface Paint of required shde two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.70 ltr/10 sqm of approved brand and manufacture within all leads &lifts as per entire satisfaction & direction of Engineer-in -charge

Wall painting with plastic emultion paint of approvedbrand and manufactured to give an evev shade :one or more coat on old work within all leads &lifts as per entire satisfaction & direction of Engineer-in -charge

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to S:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately Size of Tile 600x600 mm with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment forgrouting of joints to be made separately Size of Tile 600x600 mm with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - Allwork up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars.with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

DARSHAN SINGH CONTRACTOR

MANOJ BHARDWAJ

Randhir Singh