BUILDING WORK

Name of Work :- (CDP-5 ) (Package - 1 ) Constructing a Panchayat Bhavan at

Village Telod, Kesalu, Simartha, Ta. Amod Dist. Bharuch

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

1 Boring holes 3.5m deep in ordinary soil( for cast in situ piles) and 18.00 No. 1270.11

getting out the soil and disposal of the surplus excavated soil as

directed within the lead of 50m for following diameter of the piles and

for underreaming inside the bore holes for underreamed piles of

following diameters and deduct from the rate for boreholes of 3.5 m

depth, if bore holes are made deeper or shallowe than 3.5 m for piles

of following dia. (B) 250mm

2 Excavation for foundation upto 1.50 mt depth including sorting out and 135.00 Cum 117.08

stacking of useful materials and disposing the excavated stuff within all

lead and lift for all sorts of soil.

3 Excavation for foundation from 1.5 mt. to 3.0 mt. depth including 40.50 Cum 149.67

sorting out and stacking of useful materials and disposing the

excavated stuff within all lead and lift for all sorts of soil.

4 Providing and laying cement concrete 1:3:6 (1- cement : 3 coarse sand 27.60 Cum 2965.76

: 6 hand broken stone aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in foundation and plinth.

5 Providing and laying cement concrete 1:2:4 (1- cement : 2 coarse sand 5.70 Cum 3816.45

: 4 graded stone aggregates 20 mm nominal size) and curing complete

including the cost of formwork (A) Wall caps / coping.

6 Providing and laying ordinary cement concrete M-200 mix and curing 19.50 Cum 4685.81

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in foundations, footing,

base or columns and mass concrete.

7 Providing and laying ordinary cement concrete M-200 mix and curing 20.40 Cum 4685.81

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in foundations, footing,

base or columns and mass concrete.

8 Providing and laying ordinary cement concrete M-200 exposed work 20.70 Cum 8715.08

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (B) COLUMNS having any

cross sectional area.

9 Providing and laying ordinary cement concrete M-200 exposed work 39.90 Cum 7841.86

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (A) BEAMS having any

cross sectional area.

10 Providing and laying ordinary cement concrete M-200 exposed work 63.90 Cum 7871.94

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in Slabs having any

11 Providing and laying ordinary cement concrete 1:2:4 (1 cement, 2 12.60 Cum 5444.55

coarse sand, 4 graded stone aggregate 20 mm nominal size) for RCC

lintel including finishing smooth with curing etc. complete including the

cost of form work but excluding cost of reinforcement.

12 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse 8.10 Cum 6335.31

sand : 4 graded stone aggregates 20 mm nominal size) for reinforced

concrete Chhajjas not exceeding 10cm. thickness upto floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 fine sand) to give a smooth and even surface centering and

form work and curing complete excluding cost of reinforcement.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

13 Filling available excavated earth (excluding rock) in trenches, plinth, 139.80 Cum 130.39

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each deposited layer by ramming and watering.

14 Filling in foundation and plinth with murrum or selected soil in layers of 203.10 Cum 289.06

20 cm thickness including watering, ramming and consolidation and

dressing etc. complete.

15 Providing and laying brick work using common burnt clay building 29.40 Cum 4006.70

conventional type bricks having crushing strength not less than

Kg./Sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement :

fine sand) including the cost of all materials and labour charges etc.

16 Providing and laying brick work using common burnt clay building 182.10 Cum 4289.33

conventional type bricks having crushing strength not less than

Kg/sq.cm. in super structure above plinth level in cement mortar 1:6 (1

cement : 6 fine sand) including the cost of all materials and labour

charges etc. complete.

17 Providing I.S.I. Mark T.M.T. bar Fe-415 reinforcement for R.C.C. work 18051.00 Kg. 67.26

including bending, binding and placing in position complete for all floor

18 Providing and laying half brick work using common burnt clay building 76.20 Sq.m. 703.64

conventional type bricks having crushing strength not less than

Kg/Sq.cm in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 Nos.

of 6mm mild steel round bars after every three course embedded in

cement mortar in super structure including the cost of all materials and

labour charges etc. complete.

19 Providing 15mm thick cement plaster in single coat on brick / concrete 1172.70 Sq.m. 215.24

wall for interior plastering upto floor two level finished even and smooth

in cement mortar 1:4 (1-cement : 4 sand) including floating coat of

cement slurry etc. complete.

20 Providing 10mm thick cement plaster in single coat on brick / concrete 418.50 Sq.m. 213.18

wall for interior plastering upto floor two level finished even and smooth

in cement mortar 1:4 (1-cement : 4 sand) including floating coat of

cement slurry etc. complete for ceiling.

21 Providing 20 mm thick cement plaster in single coat on brick/concrete 489.00 Sq.m. 235.41

wall for interior plastering up to floor two level, finished even and

smooth in cement mortar 1:3 (1 cement : 3 sand) including floating

coat of cement slurry etc. complete.

22 Providing and laying Marbo Granite tiles 8 to 10 mm thick, 24'' x 24'' in 309.00 Sq.m. 1073.13

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand) finishing with flush

pointing in white cement.

23 Providing and laying polished Kota stone slab flooring over 20mm 106.50 Sq.m. 976.72

(average) thick base of cement mortar 1:6 (1-cement : 6 coarse sand)

or L.M. 1.1.5 (1-Lime putty : 1.5 - coarse sand) laid over and jointed

with grey cement slurry including rubbing and polishing etc. complete

with mirror polishing. (A) 25mm thick.

24 Providing and fixing M.S. grills of required pattern to wooden frames of 1152.00 Kg. 154.62

windows etc. and with M.S. flats at required spacing and frame around

square or round headed bolts and nuts by screws. (A) Ornamental grill

25 Finishing wall with water proofing cement paint of on wall surfaces (two 489.00 Sq.m. 58.08

coats) to give an approved brand and manufacture and of required

shape even shade after thoroughly brushing the surface to remove all

dirt and remains of loose powered materials.

26 Distempering with dry distemper of approved brand and manufacture 1593.00 Sq.m. 47.09

(two coats) and of required shade on wall surfaces of given an even

shade, over and including a priming coat of whiting after thoroughly

brooming the surface free from mortar dropping and other foreign

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

27 Providing and fixing window having extruded aluminum colour 53.10 Sq.m. 2242.69

anodized section frame main outer size 95mm x 24mm x 1.17mm (@

wt. of 0.738 kg/mt), horizontal three track member size 92mm x

31.75mm x 1.30mm (@ wt. of 1.07 Kg/mt), vertical member of size

92mm x 31.75mm x 1.50mm (@ wt. of 1.06 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (@ wt. of

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (@ wt.

of 0.456 Kg/mt) with 5 mm thick transparent bronze colour tinted float

glass partly fix and partly sliding with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per

details etc. complete.

28 Providing and fixing flush door shutters, solid core construction with 68.10 Sq.m. 1797.77

frame of first class hardwood with cross board and face veneer or

plywood face panels including anodized alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodized alluminium butt hinges in flush door shutters (2) 35 mm thick.

29 Providing and laying ceramic tiles 6mmto 10mm thick in skirting, risers 117.00 Sq.m. 995.81

of steps and dedo on 10mm thick cement plaster 1:3 (1-cement :

coarse sand) and jointed with white cement slurry.

30 Providing and fixing wash basin with single hole for pillar tap with C.I. 6.00 No. 1529.03

or M.S. brackets painted white including cutting holes and making

good the same but excluding fitting in white colour including providing

and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia. &

providing and fixing M.I. fisher union for washbasin or sink.

31 Providing, laying and jointing in true line and level I.S.I. mark U.P.V.C 120.00 Rmt. 72.65

(Sch-40) for cold water including fitting as approved by Engineer in

charge. Pipe shall be fixed on the wall with held of clamp at every two

meter c/c shall be concealed or open as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (A) 15mm dia.

32 Providing, laying and jointing in true line and level I.S.I. mark U.P.V.C 60.00 Rmt. 91.84

(Sch-40) for cold water including fitting as approved by Engineer in

charge. Pipe shall be fixed on the wall with held of clamp at every two

meter c/c shall be concealed or open as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (B) 25mm dia.

33 Providing and fixing screw down bib taps of following size. (A) Brass 6.00 No. 186.83

screw down bib tap polished bright. (i) 15mm dia. as directed by

Engineer in charge.

34 Providing, erecting and fixing double coated I.S.I. Mark P.V.C. water 3000.00 Litre 3.95

tank of required capacity each with all necessary fittings and

connection etc. complete on terrace as directed.

35 Providing & laying (two level or slopes) & jointing with stiff mixture of 45.00 Rmt. 518.84

cement mortar in proportion 1:1 salt glazed stoneware pipes following

nominal internal dia. including testing of pipes and joints complete with

providing and laying C.C. 1:5:10 [1 Cement, 5 Fine sand, 10 graded

stone aggregate 40mm nominal size] bedding for stoneware pipes with

necessary form work and curing complete (A) 150 mm dia. [166 avg.

36 Providing and laying broken china mosaic flooring for terrace using 311.73 Sq.m. 747.29

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out up to surface using white cement including rounding off junctions

and extending them up to 15 cm along the wall, clearing with water and

oxalic acid etc. as directed.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

37 Providing and fixing 12.5 litre high level C.I. flushing cistern with a pair 12.00 Each 1554.32

of C.I. or mild steel brackets, complete with fittings such as syplionic

arrangement 15 mm nominal size brass ball valve with polythene float,

lever G.I. china (60 cm) & pull union and couplin for connection with

inlet, outlet and overflow pipes etc. including cutting holes in walls and

making good the same (over flow pipe to be measure and paid for

38 Carrying out plinth treatment to post construction existing structure by 396.00 Sq.m. 34.36

spraying chemical solution for termite control treatement including

labour and materials consistent with I.S.I specification.

39 Providing and fixing cast iron (spun) Nahni trap of the following nominal 6.00 No. 615.63

diameter of self cleaning design with C.I. screwed down or hinged

grating including cost of cutting and making good the walls and floors

100 mm inlet and 50 mm. outlet.

40 Providing and fixing C.P. brass towel rail complete with C.P. brass 6.00 No. 603.19

brackets fixed to wooden plugs with C.P. brass screws (B) 600mm x

41 Providing and fixing gun metal check or non - return full way wheel 6.00 No. 186.83

valve of 15mm dia. ESSCO, GMT, SAGAR or DELUXE brand. (i)

42 Providing and fixing gun metal check or non - return full way wheel 6.00 No. 420.63

valve of 25mm dia. ESSCO, GMT, SAGAR or DELUXE brand. (ii)

43 Providing and fixing ball cock of approved quality as directed. (A) 6.00 No. 132.89

Copper Metal (i) 25mm dia.

44 Constructing Septic tank and bed concrete 1:3:6 (1 Cement, 3 Coarse 3.00 No. 26657.94

sand, 6 crushed stone aggregate 40mm nominal size) and P.C.C 1:2:4

15cm thick and brick work using common burnt clay building 35kg/cm2

in cement mortar 1:5 including inside smooth plaster etc. complete.

45 Providing and fixing polished marble stone with necessary moulding 82.50 Sq.m. 3372.19

around Sill & Jamb of windows. For windows total width 0.23 + 0.07 =

46 Constructing a cooking platform 60 cm. width and 70 cm high resting 9.00 Rmt. 2656.06

on B.B. Masonry walls 23 cm thick in C.M.(1:6) with (i) Fixing or

precast R.C.C. 1:2:4) 8 cm. thick slab with marble chips set in C.M.

(1:6) (6mm thick terrazo) with plastering on exposed faces walls in

C.M. (1:4) etc. complete.

47 Providing sock pit of 5.00 cum 1:3 volume including excavating sand 6.00 No. 3372.19

filling brick bats with dry masonry work at top for 45cm height including

covering top width stone including providing vatas in C.M. 1:3 with

finishing curing etc. as directed.

48 Providing and fixing 600mm x 450mm beveled edge mirror of superior 6.00 No. 833.73

glass mounted on 6mm the A.C. sheet or plywood sheet and fixed to

wooden plugs with C.P. brass screws and washers.

49 Providing and fixing S.W. Gully trap with C.I. grating brick masonry 6.00 No. 1292.19

chamber and water tight C.I. cover with frame of 300 x 300 mm size

(inside) with standard weight (i) square mouth traps (B) 150 mm x

mm size P or R type.

50 Providing and fixing marble stone name plate including setting in C.M. 3.00 No. 2448.24

1:2 including finishing and engraving letters etc. complete as directed.

51 Providing and fixing wash down water closet (European type WC pan) 6.00 No. 1595.04

vitreous chine white colour with integral "P" or "S" trap including jointing

the trap with soil pipe in cement mortar 1:1 (1 Cement : 1 fine sand)

including seat and cover of standard quality.

52 Providing and fixing urinal approved quality connecting the urinal with 6.00 No. 1036.27

waste pipe, trap, in (A) white earthen ware flat back or corner type size

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

53 Providing and fixing pillar tap, capstan head, screw down high pressure 6.00 No. 308.73

with screws, shanks and back nuts. (i) 15mm dia. as directed by

Engineer in charge.

54 Providing and fixing to wall, ceiling and floor 6.0 Kg. F/Cm2 working 192.00 Rmt. 787.40

pressure polythene pipes of the following outside dia. low density,

complete with special flange compression type fittings, wall clips etc.

including making good the wall, ceiling and floor. (F) 50mm 6.0 Kg.

F/Cm2 (Air Ventilation pipe)

55 Providing and fixing chromium plated brass half turn flush cock of 6.00 No. 263.77

approved quality including fixing in pipe line etc. complete. (ii) 25mm

dia. as directed by Engineer in charge.

56 Providing and fixing in position cowl vent to pipes (A) 75mm dia. as 6.00 No. 389.74

57 Wall painting and lettering (two coats) with plastic emulsion paint of 3.00 No. 1530.15

approved brand and manufacture on undecorated wall surface to give

an even shade including thoroughly brushing the surface free from

motor droppings and other foreign matter & sand papered smooth for

Gram Panchayat house.

58 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 45.00 Nos. 363.60

(green) both are of ISI marked FR PVC insulated multistrand copper

wires, in existing pipe duly erected complete with 6A Modular type

switch / bell push & accessories and earth continuity of following type,

erected on PVC / Metallic box covered with appropriate front plate

modules erected concealed in wall / ceiling with casing caping double

lock type. Cat. II

59 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 15.00 Nos. 585.80

(green) both are of .ISI marked FR PVC insulated multi-strand copper

wires, in existing pipe duly erected complete with 6A Modular type

switch and hum free EME 5/6 step type electronic fan regulator with

separately mounted & accessories with earth continuity of following

type erected on PVC/Metallicbox covered with appropriate front plate

modules erected concealed in wall/ceiling rose as directed. Cat II

60 Point wiring forIndividual Plug with 2-1.5 sq.mm & earthwire of 1.5 6.00 Nos. 393.90

sq.mm (green) both are of ISI marked FRPVC insula-ted multistrand

copper wires, in existing pipe duly erected comp. with 6A Modular type

switch & 6A 5pin Plug erected on PVC / Metallic box covered with

apropriate front plate modules erected concealed in wall/ceiling with

following type of accessories. for 6A Plug with 2-1.5 sqm cu. wire. PVC

Casing Caping double lock type.- Cat. II

61 Point wiring for Individual Plug with 2-1.5 sq.mm & earthwire of 1.5 6.00 Nos. 525.20

sq.mm (green) both are of ISI marked FR PVC insulated multistrand

copper wires, in existing pipe duly erected complete with 6A Modular

type switch & 6A 5pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected concealed in wall / ceiling with

following type of accessories. for 16A Plug with 2-4 sqm cu. wire. PVC

Casing Caping double lock type.- Cat. II

62 Point wiring for looped PLUG with tissino type single pole ISI marked 6 9.00 Nos. 50.50

A. Switch and 6A Socket erected with necessary connections erected

on polished wooden block/ Metal / PVC Box covered with 3 mm thick

laminated sheet for open / concealed wiring.

63 Supplying & erecting approved make 1 x 36./40 watt sleek batten type 15.00 Nos. 606.00

fluorescent fitting made of anodised Aluminium reflector. Complete

with HF Electronic ballast assembly housed in engineering plastic

covers with tube holders, erected with necessary lead wire & hardware

materials and adopter if reqired. Cat III

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

64 Approved make Ceiling Fan with Condenser 230 volt A. C. 50 15.00 Nos. 1949.30

Cys.1200 mm sweep complete having 3 blades alluminium body and

blade sets having ornamental design shanks, canopy & 30 cms. down

rod erected with 24/0.2 flae 3 core flexible wire with earthing + add.

80.00 Rs Exra for Reguator

65 Decorative Call bell ting tong type, 250 Volts. Comp errected on 3.00 Nos. 151.50

polished wooden block or in M.S.box with 3mm .thick laminated sheet.

66 Providing Fuse Unit of kit kat pattern porcellin cut out 10A or 6.00 Nos. 121.20

16A.errected on polished wooden block.

67 Approved make C.F.L.lamp Non-Retrofit 13 /15 / 18 Watt. - Cat. II 6.00 Nos. 141.40

68 Approved make C.F.L.lamp Non-Retrofit 35 / 36 Watt. - Cat. II 6.00 Nos. 404.00

69 Pipe type earthing having 15 cms. long & 2.50cms. dia. Galvanised 3.00 Nos. 636.30

iron pipe with coupling and buch burried in speciallyprepared earth pit.

Complete with necessary 8 swg. Earth wire including using salt and

charcol / cock as required for pipr type earthing.

70 Mains with 1.1 KV gradeFR PVC insulated ISI marked stranded 90.00 Rmt 80.80

Copper conductor wire in existing pipe erected with 1.5 sq.mm copper

conductor FR PVC insulated stranded wire of green colour for earth

continuity of following size

71 Approoved make MEM type Double pole iron clad switch & fuse 240 / 3.00 Nos. 328.25

250 V. 15 / 16 A. confirking to I.S.S. erected on polished wooden block.

72 Cast iron plate size 30 x 30 x 0.35 cms. Burried in specially prepared 3.00 Nos. 808.00

2.50 mtr. Deep earth pit complete with necessary G.I. Strip in G.I. Pipe

2 mtr long with coupling and G.I. Plug for earthing of switchgear

conduict run or power plug. etc.complete.

73 Supplying and errecting standard or equivalent make 25Amp. 10 Ka. 3.00 Nos. 585.80

Double pole MCB (G) series curve with metal Top company fabric-ated

powder coat & shelt sheet encloser errected consuitable wooden base

with connection. Cat. III

74 Providing and errecting PVC Casing Patti Conforming to ISS Complete 75.00 Rmt 25.25

erected with necessary fitting fix with adhesive solution(i) For Open

i.e. Rs. Sixty Two lacs Fifty Three thousand Five hundred Eighty and Fourty Six paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have

been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Executive Engineer

Panchayat (R & B) Sub Division, Officer Panchayat (R & B) Division,

Jambusar Panchayat (R & B) Division, Bharuch