Electrification of Drivers Cabin and Canteen building in the District Panchayath, Palakkad

Amount

Supply and wiring points using rigid PVC conduit of 20 mm with specials, duly clamped or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping etc.complete with suitable size modular type metal switch boxes, modular type front plates (white) etc.up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete as required.

Single Control light point with 6A, plate ceiling rose - Short point (90.2.1.1 )

Twin control light point with 6A,3 plate ceiling rose through existing conduit - Do - Short point.(90.2.2.2)

Single Control light point without ceiling rose - Short point (90.2.1.3)

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point (90.2.1.4)

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points. (90.2.1.6)

Supply, conveyance installation testing and commissioning the light fittings of following types complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire etc.as required.

1200 mm 1X20W LED Lamp with box type fixture. (90.3.20.3)

Do - directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3core copper conductor flex wire etc.as required.

1200 mm 1X20W LED Lamp with box type fixture. (90.3.22.3)

Supply and fixing cast aluminium stove enamelled bulk head fitting with deep drawn anodised aluminium body,epoxy powder coated,heat resistant prismatic glass cover suitable with 7w LED bulb to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated 3 core round copper conductor flex wire conforming to to relevant ISS or extending the original wiring and making good the surface as required. (od15213/2019_2020)

Conveyance,installation,testing and commiss-ioning of exhaust fans of size up to 305mm in the existing opening, fixing necessary anchor bolts/bolt and nuts etc.as required including giving connections with the supplied wire along with the exhaust fan. (od15357/2019_ 2020)

Charges for cutting holes suitable for accom-modating exhaust fans up to 305mm sweep including plastering colour washing etc.as required. (90.4.8)

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm Plastic shade and 7 W LED lamp and giving connection etc as required. (od15215/2019_ 2020)

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

1200mm sweep - 5star rated ceiling fan complete with 300mm down rod,canopies, shackeles etc. working on 230V/240V single phase A/C (90.4.5.2)

Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.(90.4.1)

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm. (90.6.10.1)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq.mm 2 Run (1.17.2)

1.50 sq.mm 4 Run (1.17.4)

2.50 sq.mm 2 Run (1.17.11)

2.50 sq.mm 4 Run (1.17.13)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc.as required. 1 or 2 Module (75mmX75mm) (1.27.1)

Do - 3 Module (100mmX75mm) (1.27.2)

Do - 8 Module (125mmX125mm) (1.27.5)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet.(1.24.5)

Do - 15/16 amp switch. (1.24.3)

Do - 3 pin 5/6 amp socket outlet. (1.24.4)

Do - 5/6 amp switch. (1.24.1)

Do - two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (1.25)

Do - piano type switch / socket on the existing switch box/ cover including connections etc. as required.5/6 amps switch.(1.23.1)

Do - modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (1.26)

Supplying and fixing single pole and neutral, sheet steel, MCB distribution board,240v,on surface/ recess,complete with tinned copper bus bar, neutral bus bar,earth bar,din bar, interconnections,powder painted including earthing etc.as required. (But without MCB/ RCCB/Isolator,8way Double door.(2.3.2)

Do - 12way, Double door.(2.3.3)

Supplying and fixing following rating,double pole,240volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required.40 amps. (2.12.1)

Do - double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps (2.14.1 )

Do - 5 amps to 32 amps rating, 240/415 volts, "C" curve, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. (2.10.1 )

Supply, laying and clamping of 1no.2 core 6sq mm PVC insulated and PVC sheathed armoured aluminium power cable,1.1 KV grade with factory made clamps, spacing of clamps not exceeding 60cms, making good the damages,colour washing etc.as required. (90.12.7.2)

Supply & laying of one number 2 core 6 sq. mm PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade in the existing GI pipe as required.. (90.12.5.2)

Supplying and making end termination with brass compression gland and aluminium lugs for 2 core 6 sq. mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (19mm) (9.1.1)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps.for cable protection. (90.3.18.1)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 2.00 copper conductor.(14SWG) (90.16.1.1)

Do - 2.65mm copper conductor (12 SWG) (90.16.1.2)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) (90.16.5.1)

Supply and providing12x3mm brass nut and bolt etc.as required.(od21888/2019_2020)

SHAHUL HAMEED K P

POZITIVE POWER INDIA PVT LTD

SMITHESH OJ

Bidder Name

SMITHESH OJ

POZITIVE POWER INDIA PVT LTD

Electro Guard Power Solutions

SHAHUL HAMEED K P