Fabrication and erection of Height Gauge Barrier at major road crossing on SR side of Radhanpur Branch Canal (slice-1) Ch 0.00 km to 11.469 km

BILL OF QUANTITIES

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and

are given to provide a common basis for bidding. The basis of payment will be the

actual quantities of work ordered and carried out, as measured by the Contractor

and verified by the Engineer and valued at the rates and prices tendered in the

priced Bill of Quantities, where applicable, and otherwise at such rates and prices

as the Engineer may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so

far as it is otherwise provided under the Contract, include all constructional

plant, layout, supervision, materials, erection, maintenance, insurance, profit,

taxes and duties, together with all general risks, liabilities and obligations set out

or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed

to enter a rate or price shall be deemed to be covered by other rates and prices

entered in the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included

in the items provided in the priced Bill of Quantities, and where no Items are

provided the cost shall be deemed to be distributed among the rates and prices

entered for the related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant

sections of the contract documentation shall be made before entering rates or

prices against each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Road and Bridge works. For building works specifications for

building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of

compressed air drilling for its removal, and which cannot be extracted by ripping

with a tractor of at least 150 kw with a single rear mounted heavy duty ripper.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item (with brief Quantity Unit Rate In Amount

No. specification and reference to figures

book of specifications)

Excavation for foundation in all

sorts of soil including yellow

sandy gravelly soils ,soft & hard

murrum etc. in dry condition

including depositing the

excavated stuff in uniform layers

in banks or as and where directed

etc. complete for lead up to 500m

and all lift. (BY MACHINERY)

Excluding dewatering.

Providing & Laying in position

"NOMINAL MIX" cement concrete

using cement, sand and crushed

aggregate by mass and machine

mix for C.C./R.C.C work incl.

necessary formworks centering,

2 scaffolding, compaction by 5.95 Cum 3935

vibrator, curing as directed with

all lead & lift etc complete

Without Dewatering and

excluding cost of steel

reinforcement. (A) For

Foundation concrete / General

purpose (c) C. C. Nominal Mix,

M-15 and MSA-20 mm

Providing & Laying in position

"DESIGN MIX" cement concrete

using cement sand and crushed

aggregate for C.C./ R.C.C work by

"FLORI" including necessary

formwork, centering, scaffolding,

3 compaction by vibrator, curing as 17.90 Cum 4651

directed with all lead & lift etc

complete without dewatering

and excluding the cost of steel

reinforcement.e) Concrete grade

M-25 and MSA-20 mm

Providing and laying HYSD/TMT

Fe-415,500 D steel bar

reinforcement forR.C.C.works and

anchor bars with providing

including cutting, bending,

4 welding,binding in position, 1.27 MT 71264

hooking, placing in position with

all leads & lifts etc. complete c)

Back fill with selected earth from

out side borrow area or from

excavated usefull material

including watering, ramming,

5 consolidation etc. with pneumatic 69.65 cum 36.90

templing and lead upto 1.0 Km.

and all lift etc completed.

Fabrication and erection of Main

Girder section and Leg support

section for constructing of Height

6 Gauge for super structure

including foundation bolt, ISMB, 7.78 MT 93727

ISMC,CLEAT ANGLE, Bolts, plates

I/We am/are willing to carry out the work at… ...................... % above/below

percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure)

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1. The Contractor shall exhibit a board with brief details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as

per Govt. G.R. NO.: MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.