Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Accepted |
| 2 | Accepted-Technical | Accepted-Technical Accepted |
| 3 | Accepted-Technical ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | Accepted-Technical Accepted |
| 4 | Rejected-Technical | Rejected-Technical Rejected |
Tender Value
₹4.8 L
EMD Value
₹9,600
Closing Date
2 Apr 2026, 10:30 amClosed
Executive Engineer
HP City Transport and Bus Stand Management And Development Authority Tutikandi Shimla -4
SH Dismantling, painting, sanitary fittings work etc.)
2026_BSMDA_131158_3
No HPBSMDA/EE/2/2025-2026 Tender Vol-V
Open Tender
Civil Works
60 days
Dharamshala
Please refer tender document
9 documents required · 9 mandatory
₹415
HPBSMDA
₹9,600
14 May 2026
11 Mar 2026
2 Apr 2026
12 Mar 2026
2 Apr 2026
12 Mar 2026
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all leads : Of area 3 sq. (Three square ) metres and below (usefull Doors windows Frames and shutters to be handed over the Deptt.) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Repairs to plaster of thickness 12 mm to 20 mm (Twelve milimeter to Twenty milimeter) in patches of area 2.5 sq. (Two point five square) meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. With cement mortar 1:4 (One cement isto Four fine sand) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty milimeter) thick cement mortar 1:4 (One cement isto Four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etc., complete size of tiles 600 x600 mm (Six hundred into Six hundred milimeter), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing 10 mm (Ten milimeter) thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In dado/skirting on 12 mm (Twelve milimeter ) thick mortar 1:4 (One acid proof cement isto Four coarse sand) Acid and alkali resistant tile , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (Twelve milimeter ) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (Three point three kilogram per square meter) , including pointing in white cement mixed with pigment of matching shade complete , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and applying white cement based putty of average thickness 1 mm (One milimeter) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm (Forty milimeter) dia M.S. tube 1.5 m (One point five meter) centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after . The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose . The payment will be made once irrespective of duration of scaffolding , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within all leads of: G.S. Sheet. (usefull G.S. sheets including ridges, hips etc. to be handed over the Deptt.) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm (Eight milimeter) diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm (Zero point sixty three milimeter) thick with zinc coating not less than 275 gm/ m² (Two hundred seventy five gram per square meter), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Old work (one or more coats), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 (Ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (Forty milimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing water closet squatting pan (Indian corner type lipped front urinal basin of 430x260x350 mm (Four hundred thirty into Two hundred sixty into Three hundred fifty milimeter) and 340x410x265 mm (Three hundred forty into Four hundred ten into Two hundred sixty five milimeter) sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 (Five) litre white P.V.C. automatic flushing cistern , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing wash basin with C.I. brackets, 15 mm (Fifteen milimeter) C.P. brass pillar taps, 32 mm (Thirty two milimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm (Six hundred thirty into Four hundred fifty milimeter) with a pair of 15 mm (Fifteen milimeter) C.P. brass pillar taps , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm (Forty milimeter) C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm (Six hundred into Four hundred fifty into Two hundred fifty milimeter) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing 600x450 mm (Six hundred into Four hundred fifty milimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (Six milimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing PTMT grating of approved quality and colour. Circular type : 100 mm (One hundred milimeter) nominal dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.83 MB
BOQ_193940.xls
BOQ • 0.29 MB
SBD3.pdf
Tender Documents • 10.51 MB
Download all tender documents and submit your bid