Panchayat Ghar

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

1 Excavation for foundation upto 1.5 m depth including 155.22 Cmt. 212.53

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil (By Manual Mines)

2 Carring out plinth treatment to post construction/ 127.36 Smt. 124.35

existing structure by spraying chemical solution for

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration

Weight one percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion appication at the

rate of 5 Litre chemical / Smt of surface is

recommended as per I.S

3 Providing and laying cement concrete 1:4:8 (1- Cement : 41.54 Cmt. 2769.70

4- coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

4 Brick work using common burnt clay building bricks 80.87 Cmt. 4214.33

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement

: 6 -fine sand)(B) Conventional

5 Providing and laying ordinary cement concrete M-150 10.42 cmt. 4470.65

using B.T. stone aggregate and curing etc. complete,

including the cost of formwork, but excluding the cost of

reinforcement for R.C.C. work in wall cap /copping up to

6 Filling available excavated earth (excluding rock) in 80.64 Cmt. 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

8 Filling in plinth with sand under floors including 34.61 Cmt. 481.80

watering ramming, consolidating and dressing

BOQ Page No.1

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

9 Providing and laying Ordinary cement concrete M-200 6.18 Cmt. 5720.05

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in foundation footings, base of columns

and mass concrete.

10 Providing and laying Ordinary cement concrete M-200 0.97 Cmt. 6300.27

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Plinth BEAMS on PCC bed

11 Providing and laying Ordinary cement concrete M-200 2.36 Cmt. 10229.50

using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding

the cost of reinforcement for R.C.C. work in Columns

12 Providing and laying Ordinary cement concrete M-200 4.84 Cmt. 7043.48

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in BEAMS

13 Brick work using common burnt clay building bricks 163.06 Cmt. 4496.05

having crushing strength not less than 35 kg./Sq.Cm.in

superstructer above floor two level in Cement Mortar

1:6 (1- Cement : 6 - fine sand)(B) Conventional

14 Providing and laying Ordinary cement concrete M-200 4.24 Cmt. 7789.29

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Lintel

15 Providing and laying cement concrete M-200 for 7.49 Cmt. 7015.67

reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the

exposed surfaces with cement mortar 1:3 (1-cement,

Fine sand) to give a smooth and even surface centering

and formwork and curing complete excluding cost of

reinforcement

16 Providing and laying Ordinary cement concrete M-200 35.19 Cmt. 6425.14

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Ground Floor / Top level SLAB

17 Providing TMT Bar FE 550D reinforcement for R.C.C. 5913.70 Kg. 95.00

work including bending, binding and placing in position

complete upto floor two level

BOQ Page No.2

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

18 Providing and fixing double door shutter having colour 7.71 Smt. 4876.48

anodized aluminium section-19552 {Section 63.50 x

mm x 2.50 mm thick having weight 1.1 Kg./M.T. } for

door frame, hollow portion of door frame shall be filled

with non teakwood wood for durable grip, with factory

made 38mm thick flush door both side 1mm thick pre

laminated with 6 Lever Mortice lock {Godrej or

Equivalent), SS Aldrop, SS Handle size 30Cm Long,

Tower Bolt size 15 cm etc. as per detail colour & pattern

Apporoved by this office including necessary anodized

alluminum fixtures and fastenings.

19 Providing and fixing single door shutter having colour 19.72 Smt. 4988.21

anodized aluminium section-19552 {Section 63.50 x

mm x 2.50 mm thick having weight 1.1 Kg./M.T. } for

door frame, hollow portion of door frame shall be filled

with non teakwood wood for durable grip, with factory

made 38mm thick flush door both side 1mm thick pre

laminated with 6 Lever Mortice lock {Godrej or

Equivalent), SS Aldrop, SS Handle size 30Cm Long,

Tower Bolt size 15 cm etc. as per detail colour & pattern

Apporoved by this office including necessary anodized

alluminum fixtures and fastenings.

20 Providing and fixing window having extruded 48.26 Smt. 1583.96

aluminum Colour anodized section frame main outer

size 95mm x 24mm x 1.17mm (of Jindal Section no:2459

@ wt.of 0.738 Kg/mt), horizontal Three track member

size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size

92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm (of

Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal

Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

21 Providing and fixing FRP frame size 100x50 mm and 9.00 Smt. 2377.77

28mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & shutter

is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws & alluminium fixtures

& fastenings & fastener sleeve.

BOQ Page No.3

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

22 Constructing Sandwich Type Kitchen Platform with 2.16 Smt. 4902.54

polished Kota stone top and 100 mm height faces in

exposed faces with 30 mm thick of polished green or

approved colour and quality and polished Kota stone

slab 25 mm thick at bottom, including filling in between

joints in cement mortar 1:1 and adhesive, including

fixing Stainless Steel Kitchen Sink (Nirali or equivalent

or as directed) and polishing, moulding, grinding,

finishing and making edges smooth etc. complete. (Only

top clear area of platform shall be measured and paid

23 Providing and laying Granite stone slab flooring over 47.97 Sqm 3005.79

20mm (average)base of cement mortar 1:6 (1-cement :

coarse sand) or L.M. 1:1.5 (1- lime putty : 1.5 - coarse

sand) laid and jointed with gray cement slurry including

rubbing, polishing and bevel edge etc.complete. (A)

Granite slab 18 mm thick

24 Providing and laying marble stone slab flooring over 51.85 Sqm 2244.87

20mm (average)base of cement mortar 1:6 (1-cement :

coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse

sand) laid and jointed with gray cement slurry including

rubbing, polishing and beval edeg etc.complete. (A)

Marble slab 25mm thick

25 Providing and fixing M.S. Grills of required pattern to 2983.60 Kg. 142.21

wooden frames of window etc. with M.S. flats at required

spacing and frame alround square or round bars with

round handed bolts and nuts or by screws and including

applying a priming coat of red lead paint and two coats

of oil painting etc. complete.

26 Providing corrugated G.I. sheet of class-3 roofing fixed 30.51 Smt. 734.19

with glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses.(1) 0.80 mm

thick sheet.

27 Providing 15mm thick cement plaster in single coat on 984.71 Smt. 254.40

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-

sand)+Extra over items 58 to 64 for finishing with a

floating coat of neat cement slurry

28 Providing 10mm thick cement plaster in single coat on 250.67 Smt. 228.35

ceilings and sofits of stairs upto floor two level for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 including finishing

with a floating coat of neat cement slurry

BOQ Page No.4

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

29 Providing 20mm thick sand faced cement plaster on 440.00 Smt. 352.44

walls upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M.

1:1 (1-cement : 1-sand) etc. complete.

30 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 222.26 Smt. 1311.18

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the

surface etc. complete for light shade

31 Providing and laying Ceramic tiles 6mm thick in flooring 13.80 Smt. 997.16

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

32 Providing and laying Ceramic tiles 6mm thick in skrting 67.65 Smt. 1030.57

risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3-coarse sand) and jointed with white

cement slurry

33 Providing and laying white glazed tiles 6mm thick in 102.07 Smt. 985.47

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

34 Providing and laying broken chine mosaic flooring for 156.62 Smt. 779.70

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

35 Applying two coats of Birla or Asian acrylic lapy ( putty) 1038.49 Smt. 40.59

& two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand

papered smooth.

36 Wall painting (two coats) with plastic emulsion paint of 1054.49 Smt. 82.85

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

37 Finishing wall with weather proof exterior emulsion 752.10 Smt. 120.26

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials.etc complete

BOQ Page No.5

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

38 Providing and fixing wash down water closet European / 4.00 No. 2668.61

Anglo Indian type W.C. pan with integral “P” or “S” trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) (A) Vitreous china

pattern - I (i) in white colour including P & F 100 mm

size “P” or “S” trap for water closet squatting pan

including jointing the trap with the pan & soil in cement

mortar 1:1 (1 cement : 1 coarse sand) including fixing

G.I. inlet connection for flush pipe with W.C. pan.

including Jet Sprey, fixing plastic seat & cover for wash

down water closet with C.P. brass hinges and rubber

buffers. including P&F PVC Flush tank of approved

brand. Cera / equivalent - fitting "Ess Ess" / equivalent.

39 Providing and fixing wash basin with single hole for 6.00 No. 2187.86

pillar tap with C.I. Or M.S. brackers painted white

including cutting holes and making good the same

vitreous china flat back wash basin 550 mm x 400 mm

size in white colour including 32 mm diac.p.brass

couplin 32 mm dia. . M.I. fisher union providing and

fixing pillar tap capstan head screw down high pressure

with screw shanks and back nut 15 mm dia. brass screw

down stop tap 15 mm dia. etc. complete

40 Providing and fixing Urinal or approved quality 4.00 No 1074.86

including conecting the Urinal with waste pipe , tap etc.

complete.(A) White earthenware flat back or corner

type size 430mm x 260mm x 350mm.

41 Providing and fixing screw down bib taps of following 18.00 No 186.83

size.(B) Brass chromium plated screws down Bib

Tap.(i) 15mm dia.

42 Providing and fixing PVC SWR Nahni trap IS 14735 for 8.00 No 586.27

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and

making good the walls.

43 Providing and fixing S.W. gully trap with C.I. grating 5.00 No 1246.92

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size

P or R type

44 Providing and fixing C.P. brass towel rail comlete with 5.00 No 616.42

C.P. brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

45 Providing and fixing 600mm x 450mm bevelled edge 5.00 No 859.41

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

46 Providing and Fixing PVC Spigot and Socket Soil waste 26.00 Rmt. 391.38

and Ventilating Pipe of the following nominal size

BOQ Page No.6

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

47 Providing and Fixing P.V.C. Spigot and Socket Soil waste 107.00 Rmt. 569.02

and Ventilating Pipe of the following nominal size

48 Constructing brick masonry chamber for underground 4.00 No 2932.93

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

49 Supplying & fixing PVC water tank such as Sintex 2000.00 Litre 3.95

including delievery at site, supply and fixing of inlet,

outlet, air vent overflow, drainage sleves of the specified

size, with necessary neo-prene gasket/packing/washers,

GI washer & check nuts etc. complete as directed on

terrsce, loft in bathrooms etc in any height. The rate

shall include for fixing additional accessories supplied by

the supplier accessories. The necessary pedestal /

supporting structures shall be measured relavant items

50 Providing and fixing M.S. fan clamps type 1 of 16 mm. 15.00 No. 132.29

dia M.S. bar bent to shape with hooked ends to R.C.C.

slabs during laying including painting the exposed

portion of the loops all as per standard design complete.

51 Providing laying and jointing in true line and level 76.00 Rmt. 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

52 Providing laying and jointing in true line and level 68.00 Rmt. 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

BOQ Page No.7

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

53 Providing Sock well of inside Dimension 3.00 mt. Deep 2.00 No. 42196.79

& 2.00 mt. Dia. Incl. Excavation, honey comb masonary

work in C.M. 1:6 incl. Covering the top with slab and

providing mainhole cover incl. Providing vatas and

curing etc. complete..

54 Constg Septic tank Including Excavation, B.B.C.C. 1:5:10, 2.00 No. 23161.32

with brick masonarry wall in C;M 1:6 finished with

Cement plaster in C;M; 1:3 incl. partition with half brick

masonary. Etc complete.

55 Providing and fixing Number plate of Glazed Acrylic 1.00 No 6060.00

Material with frame of required size fixing with SS studs

including finishing and printing letters/matter etc.

completes.

56 Providing and fixing Number plate of Marble plate stone 1.00 No 306.14

of required size set in C.M. 1:4 including finishing and

engeaving letters etc. completes.

57 Providing and fixing in position 300 mm high, 150 mm 35.00 No 1515.00

wide English/Gujarati letters made from 1.0 mm thick

stainless steel sheet as directed by Engineer-in-charge

with all necessary tools & plants etc. complete.

58 Point wiring for Light / Fan / Bell / Primary Point with 2- 80.00 Point. 308.23

1.5 Sq.mm & earth wire of 1.5 Sq.mm (green) both are of

ISI marked 1.1 kv grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in / flushed on wall /ceiling, complete with 6A

Tissino Type ISI marked flush type switch / bell push

and accessories erected on Metal / PVC Box covered

with 3 mm thick PC (Polycarbonate) / Acrylic sheet with

necessary Lamp holder / ceiling rose / H.D. Connector as

directed. (c) with oval conduit /pvc casing capping

double lock type

59 Point wiring for independent PLUG with following size 28.00 Point. 317.65

mains earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in /flushed on wall/ceiling , complete with ISI

marked 3 / 5 Pin socket and tissino type switch erected

with earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) / Acrylic

sheet. (c) with oval conduit /pvc casing capping double

60 Mains with ISI marked electrolyte stranded copper 450.00 Mtr. 69.69

conductor, Non PVC Zero Halogen free fire retardant

insulated copper conductor, insulated wire (HFFR)

conforms to IS-694, erected in existing pipe with 1.5sq.

mm copper conductor of same specifications for earth

continuity of following size. [i] 3 wire 1.5 sq.mm

BOQ Page No.8

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

61 Supplying & erecting earth pit of minimum bore 2.00 No's 5004.05

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications. (a) For Electrical Installation up to 440V in

normal soil Length of pipe - 1 Mtr Back filling compound

- 1 Nos Bag of 15 Kg.

62 Providing & Erecting following Shockproof tissino type 4.00 No's 32.32

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal Box. erected on wall/ ceiling. (1)

One no Single pole 6 A Switch / Bell push

63 Providing & Erecting following Shockproof tissino type 22.00 No's 49.03

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal Box. erected on wall/ ceiling. (3)

One no Single pole 16 A Switch

64 Supplying and erecting LED indoor fittings with LEDs of 23.00 No's 367.99

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt LED, LED driver efficiency > 85 % (

fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

(A) Tube Light with integral driver (iv) 22-24 Watts,

Surge - 2KV,IP-20, conventional 4 feet

65 Providing & Erecting following Shockproof tissino type 15.00 No's 231.49

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal Box. erected on wall/ ceiling. (14)

Electronic Hum free EME Socket Type Steps Fan

66 Providing & erecting Switch board for Computer or 8.00 No's 345.93

electric apparatus consisting of following items in single

board erected on PVC / Metal board with 3 mm thick

PC (Polycarbonate) / Acrylic sheet erected as directed1

no. 6A/16A universal plug-switch combined. , 4 nos. 6A

Switch & 4 nos. 6A 5 pin Plug

BOQ Page No.9

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

67 Providing & erecting 240 V MCB double pole switch for 6.00 No's 359.56

motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing box

having following capacity (B) 40 Amp. Cat.III

BOQ Page No.10

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

68 Supplying and erecting led lamps with following wattage 25.00 No's 278.56

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (iv) 16 to 20 watts

69 Providing and erecting Sheet Steel powder coated MCB 7.00 No's 757.07

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, confirming

to IS 13032 and BS 5486-1986 without MCB to house

appropriate nos. of MCBs. (The DBs should be used of

same company of MCB to be used) (E) Single phase

way single door

70 Providing and erecting open well type horizontal mono 2.00 No. 10477.74

block pump set with cast iron body having following

specification (C) 1.00 H.P. single phase open well motor

pump set suitable for 145 LPM discharge @ 25 mtr.

head, suitable for 32 mm dia. delivery pipe with control

panel and 10 mtr. long 3 x 1.5 sq.mm submersible flat

copper cable Cat. II.

71 Providing and erecting Approved make Ceiling fan with 15.00 No's 1768.91

double ball bearing ISI mark with condenser A.C.

23OV.50 c/s.1200 mm sweep complete, canopy and

cms down rod erected on existing hook or clamp with

24/0.2, 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

BOQ Page No.11

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

72 Approved make ELCBs / RCCBs conforming to IS: 12640 1.00 No's 2636.10

and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on

single phase 240 V. having characteristic of quick action

& tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating

erected as directed (ii) 40Amps. DP Cat-II

TOTAL =

I / We am / are willing to carry out the work at ________________________________ % above / below

percent (should be written in figure and words) of the estimated mentioned above. Amount of my / our

tender works out as under

Estimated amount put to Estimated amount put to

Tender Rs. __________________ Tender Rs. __________________

Deduct ________ % below Rs. ____________ Add _______ % above Rs.___________

Net Rs. _______________________________ Total Rs. _________________________

In words ______________________________ In words ________________________

(* Please strike out whichever is not applicable)

1. All work shall be carried out as per public works Department Handbook and other specifications of Division

or as directed.

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be

struck by the contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold

good for work under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. The Labour Cess shall have to be deducted from payable bill as per prevailing Rules.

6. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH /

102008 / 61 / C, Dt. 03/05/2008 attached with tender papers.

7. The contractor is totally responsible to bare all applicable taxes i.e. G.S.T. etc. & Department will not entertain

any contractor representation to reimburse any financial burden due to applicable taxes, i.e. G.S.T. etc.

Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division

KHAMBHAT ANAND.

BOQ Page No.12