JJM Railway Push through works at Haripad and adjoining Panjayath Pipeline Work

Amount

Appendix A-Railway Push through work at Pathiyoor South

100.37.11.1:In situ fabrication of M.S. pipes of size 400mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.24.1:In situ fabrication of M.S. pipes of size 800mm (I.D.) using 10mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

OD203219/2023-2024:Conveying and Laying MS pipes excluding cost of pipes and specials ,400 mm MS pipes-Data derived from 18.72.19

13.50.3:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.59:Coal tarring two coats on new work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively.

OD203165/2023-2024:construction of pushing chamber of inner size 2.0m X3.0mx 2.6m in M 25 grade cement concrete for reinforced cement concrete work and 10mm MS rod (330Kg) for foundation, side wall and cover slab platform 2.4mx3.4mx.2M, side wall 20cm thick, in 1:3:6 using 20mm broken stone, plastering inside the valve chamber and cover slab in CM 1:3, 6mm thick including cost and conveyance of all materials as per direction of deptl. officers.

100.35.7:Testing 400mm DI/CI pipeline with potable water to the required test pressure. 400 mm dia Observed Data derived from item no.1026 of PHED DATA

OD206979/2023-2024:Laying casing 800 mm (OD) MS Pipe of suitable thickness across the railway track as specified by the railway authorities by push through technique including all hire charges of machinery, labor, fuel, erection of the machinery, transportation dismantling after completion of work erecting well point dewatering system for the entire working period, digging of pushing and receiving pits, carrying out earth work excavation as required for adopting push through pipe laying including necessary shoring etc. complete and reforming ground after completion of work

100.37.11.3:Cutting 400mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.11.4:Welding 400mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.11.5:Grinding cut and weld edges of 400mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.31.1.9:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 400mm diameter, Class I.

100.98.465:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 400mm.

OD203168/2023-2024:SYSTEM WITH CATHODIC PROTECTION TO THE 800 MM MS CASING PIPE: -Design, Material Supply, Installation, Testing and Commissioning of Sacrificial Anode Cathodic Protection (SACP) for pipeline-Design of Sacrificial Anode Cathodic Protection (SACP) for 400mm carrier pipe and 800mm casing pipe for considering a design life-Supply of pre-packed Magnesium Anode for SACP using sacrificial anode (Including cable)-Installation of pre-packed Magnesium Anodes by auguring to a depth of at least two meters. Termination and conducting of the anode tail cable to the nearby Test lead post-Supply and installation of Test lead c/w shunt and rheostat for monitoring and a lockable-hinged door suitable for use in corrosive environment with xylem sheet, weather proof type and a gasket will be provided in the door to maintain IP 55 rating-

OD203170/2023-2024:Constructing valve chamber of inner size 1.50 m x1.50 m x1.50m in M-25 grade cement concrete for reinforced cement concrete work and 10 mm MS rod(330 Kg) for foundation,side wall and cover slab(Plat form 1.80 mx1.80 mx0.15 m,side wall15 cm thick,cover slab 2Nos of size 1.80 mx0.60 m x 0.20 m)over a PCC base of size 2.00mx2.00mx0.15 m in 1:3:6 using 40 mm broken stone,plastering inside the valve chamber and cover slab in CM.1:3, 6 mm thick including cost and conveyance of all materials etc.complete. as per the direction of deptl officers.

OD206986/2023-2024:Supply and fixing of Heavy duty Manhole cover 560mm Dia with frame

100.37.11.2:Fabricating M.S. flanges of diameter 400mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.

Appendix B-Railway Push through work at Pathiyoor North

100.37.22.1:In situ fabrication of M.S. pipes of size 700mm (I.D.) using 10mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.10.1:In situ fabrication of M.S. pipes of size 350mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

OD207664/2023-2024:Conveying and laying MS pipes excluding cost of pipes and specials,350 mm MS pipes-Data derived in 18.72.19 in DAR

13.50.3:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.59:Coal tarring two coats on new work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively.

OD207672/2023-2024:Construction of pushing chamber of inner size 2.0m X3.0mx 2.6m in M 25 grade cement concrete for reinforced cement concrete work and 10mm MS rod (330Kg) for foundation, side wall and cover slab platform 2.4mx2.4mx.2M, side wall 20cm thick, in 1:3:6 using 20mm broken stone, plastering inside the valve chamber and cover slab in CM 1:3, 6mm thick including cost and conveyance of all materials as per direction of deptl. officers Details of cost for one chamber

100.35.6:Testing 350mm DI/CI pipeline with potable water to the required test pressure. 350 mm dia Observed Data derived from item no.1024 of PHED DATA

OD207675/2023-2024:Laying casing 700 mm (OD) MS Pipe of suitable thickness across the railway track as specified by the railway authorities by push through technique including all hire charges of machinery, labor, fuel, erection of the machinery, transportation dismantling after completion of work erecting well point dewatering system for the entire working period, digging of pushing and receiving pits, carrying out earth work excavation as required for adopting push through pipe laying including necessary shoring etc. complete and reforming ground after completion of work

100.37.10.3:Cutting 350mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.10.4:Welding 350mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.10.5:Grinding cut and weld edges of 350mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.31.1.8:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 350mm diameter, Class I.

100.98.464:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 350mm.

OD207678/2023-2024:SYSTEM WITH CATHODIC PROTECTION TO THE 700 MM MS CASING PIPE: -Design, Material Supply, Installation, Testing and Commissioning of Sacrificial Anode Cathodic Protection (SACP) for pipeline-Design of Sacrificial Anode Cathodic Protection (SACP) for 300mm carrier pipe and 700mm casing pipe for a chainage of 50m considering a design life-Supply of pre-packed Magnesium Anode for SACP using sacrificial anode (Including cable)-Installation of pre-packed Magnesium Anodes by auguring to a depth of at least two meters. Termination and conducting of the anode tail cable to the nearby Test lead post-Supply and installation of Test lead c/w shunt and rheostat for monitoring and a lockable-hinged door suitable for use in corrosive environment with xylem sheet, weather proof type and a gasket will be provided in the door to maintain IP 55 rating-

OD207679/2023-2024:OD203870/2023-2024 Constructing valve chamber of inner size 1.50 m x1.50 m x1.50m in M-25 grade cement concrete for reinforced cement concrete work and 10 mm MS rod(330 Kg) for foundation,side wall and cover slab(Plat form 1.80 mx1.80 mx0.15 m,side wall15 cm thick,cover slab 2Nos of size 1.80 mx0.60 m x 0.20 m)over a PCC base of size 2.00mx2.00mx0.15 m in 1:3:6 using 40 mm broken stone,plastering inside the valve chamber and cover slab in CM.1:3, 6 mm thick including cost and conveyance of all materials etc.complete. as per the direction of deptl officers.

OD207677/2023-2024:Supply and fixing of Heavy duty Manhole cover 560mm Dia with frame

100.37.10.2:Fabricating M.S. flanges of diameter 350mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.

Appendix C-Railway Push through work at Cheppad

100.37.21.1:In situ fabrication of M.S. pipes of size 600mm (I.D.) using 10mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.9.1:In situ fabrication of M.S. pipes of size 300mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

OD207829/2023-2024:Conveying and laying MS pipes excluding cost of pipes and specials,300 mm MS pipes-Data derived in 18.72.19 in DAR

13.50.3:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.59:Coal tarring two coats on new work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively.

OD207834/2023-2024:Construction of pushing chamber of inner size 2.0m X3.0mx 2.6m in M 25 grade cement concrete for reinforced cement concrete work and 10mm MS rod (330Kg) for foundation, side wall and cover slab platform 2.4mx2.4mx.2M, side wall 20cm thick, in 1:3:6 using 20mm broken stone, plastering inside the valve chamber and cover slab in CM 1:3, 6mm thick including cost and conveyance of all materials as per direction of deptl. officers Details of cost for one chamber

100.35.5:Testing 300mm DI/CI pipeline with potable water to the required test pressure. 300 mm dia Observed Data derived from item no.1023 of PHED DATA

OD207843/2023-2024:Laying casing 600 mm (OD) MS Pipe of suitable thickness across the railway track as specified by the railway authorities by push through technique including all hire charges of machinery, labor, fuel, erection of the machinery, transportation dismantling after completion of work erecting well point dewatering system for the entire working period, digging of pushing and receiving pits, carrying out earth work excavation as required for adopting push through pipe laying including necessary shoring etc. complete and reforming ground after completion of work

100.37.9.3:Cutting 300mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.9.4:Welding 300mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.9.5:Grinding cut and weld edges of 300mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.31.1.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class I.

100.98.463:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 300mm.

OD207866/2023-2024:SYSTEM WITH CATHODIC PROTECTION TO THE 600 MM MS CASING PIPE: -Design, Material Supply, Installation, Testing and Commissioning of Sacrificial Anode Cathodic Protection (SACP) for pipeline-Design of Sacrificial Anode Cathodic Protection (SACP) for 200mm carrier pipe and 600mm casing pipe for a chainage of 70m considering a design life-Supply of pre-packed Magnesium Anode for SACP using sacrificial anode (Including cable)-Installation of pre-packed Magnesium Anodes by auguring to a depth of at least two meters. Termination and conducting of the anode tail cable to the nearby Test lead post-Supply and installation of Test lead c/w shunt and rheostat for monitoring and a lockable-hinged door suitable for use in corrosive environment with xylem sheet, weather proof type and a gasket will be provided in the door to maintain IP 55 rating-

OD207867/2023-2024:Constructing valve chamber of inner size 1.50 m x 1.50m x 1.50m in M-25 grade cement concrete for reinforced cement concrete work and 10 mm MS rod for foundation, side wall and cover slab, side wall 15 cm thick, cover slab 15cm thick, PCC base in 1:3:6 using 40 mm broken stone, plastering inside the valve chamber and cover slab in CM.1:3, 6 mm thick including cost and conveyance of all materials etc.complete. as per the direction of deptl officers.

OD207865/2023-2024:Supply and fixing of Heavy duty Manhole cover 560mm Dia with frame

100.37.9.2:Fabricating M.S. flanges of diameter 300mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.

Appendix D-Railway Push through work at Cheruthana Panchayath

100.37.21.1:In situ fabrication of M.S. pipes of size 600mm (I.D.) using 10mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.9.1:In situ fabrication of M.S. pipes of size 300mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

OD207975/2023-2024:Conveying and laying MS pipes excluding cost of pipes and specials,300 mm MS pipes-Data derived in 18.72.19 in DAR

13.50.3:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.59:Coal tarring two coats on new work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively.

OD207979/2023-2024:Construction of pushing chamber of inner size 2.0m X3.0mx 2.6m in M 25 grade cement concrete for reinforced cement concrete work and 10mm MS rod (330Kg) for foundation, side wall and cover slab platform 2.4mx2.4mx.2M, side wall 20cm thick, in 1:3:6 using 20mm broken stone, plastering inside the valve chamber and cover slab in CM 1:3, 6mm thick including cost and conveyance of all materials as per direction of deptl. officers Details of cost for one chamber

100.35.5:Testing 300mm DI/CI pipeline with potable water to the required test pressure. 300 mm dia Observed Data derived from item no.1023 of PHED DATA

OD207988/2023-2024:Laying casing 600 mm (OD) MS Pipe of suitable thickness across the railway track as specified by the railway authorities by push through technique including all hire charges of machinery, labor, fuel, erection of the machinery, transportation dismantling after completion of work erecting well point dewatering system for the entire working period, digging of pushing and receiving pits, carrying out earth work excavation as required for adopting push through pipe laying including necessary shoring etc. complete and reforming ground after completion of work

100.37.9.3:Cutting 300mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.9.4:Welding 300mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.9.5:Grinding cut and weld edges of 300mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.31.1.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class I.

100.98.463:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 300mm.

OD208007/2023-2024:SYSTEM WITH CATHODIC PROTECTION TO THE 600 MM MS CASING PIPE: -Design, Material Supply, Installation, Testing and Commissioning of Sacrificial Anode Cathodic Protection (SACP) for pipeline-Design of Sacrificial Anode Cathodic Protection (SACP) for 200mm carrier pipe and 600mm casing pipe for a chainage of 70m considering a design life-Supply of pre-packed Magnesium Anode for SACP using sacrificial anode (Including cable)-Installation of pre-packed Magnesium Anodes by auguring to a depth of at least two meters. Termination and conducting of the anode tail cable to the nearby Test lead post-Supply and installation of Test lead c/w shunt and rheostat for monitoring and a lockable-hinged door suitable for use in corrosive environment with xylem sheet, weather proof type and a gasket will be provided in the door to maintain IP 55 rating-

OD208008/2023-2024:Constructing valve chamber of inner size 1.50 m x 1.50m x 1.50m in M-25 grade cement concrete for reinforced cement concrete work and 10 mm MS rod for foundation, side wall and cover slab, side wall 15 cm thick, cover slab 15cm thick, PCC base in 1:3:6 using 40 mm broken stone, plastering inside the valve chamber and cover slab in CM.1:3, 6 mm thick including cost and conveyance of all materials etc.complete. as per the direction of deptl officers.

OD208006/2023-2024:Supply and fixing of Heavy duty Manhole cover 560mm Dia with frame

100.37.9.2:Fabricating M.S. flanges of diameter 300mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.

Bidder Name

SAMEER ALI CT