SPECIAL REPAIRING WORK FOR F.S.L. BUILDING (G+3) AT MEGHANINAGAR, AHMEDABAD (INCLUDING ELECTRIFICATION WORK)(First attempt)(SBD)

SCHEDULE -B WITH RATE

Sr No. Description

Unit Rate Rate in Words Total Amount

Unit Rate Rate in Words Total Amount

Dismentaling of tile or stone floor slaid in mortar incl. stacking of servicable material and disposal of unservicable material with 1488.00 SMT

1 disposing all lead and lift. Rs. Forty Seven & Paise Twenty Five Only

Removing and scrapping of old deteriorated plaster of any thickness from masonry/R.C.C member including stacking of 367.00 SMT

2 serviceable material and disposal of unserviceable from site of work with disposing all lead and lift Rs. Ninteen & Paise Thirty Eight Only

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. 11.00 CMT 1047.38 Rs. One Thousand Forty Seven & Paise

Thirty Eight Only

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including 569.00 SMT

4 necessary repairs to scratches complete. Rs. Eleven & Paise Ninteen Only

Dismantling sanitary fitting like wash basin, wc pan, indian and european type, flushing tanks etc. incl. stacking the materials 44.00 NO 401.63 Rs. Four Hundred One & Paise Sixty

5 with disposing all lead and lift.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior plastering and finished 367.00 SMT

Rs. Two Hundred Eighty Six & Paise

6 even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating coat of neat cement slurry at THIRD

Ninety Two Only

Provinding 10 mm thick cement PLASTER in single coat of interior plastering and finished even and smooth in cement 352.00 SMT

mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating coat of neat cement slurry including providing and mixing WATER Rs. Two Hundred Ten & Paise Ninety Nine

PROFFING material in C.M in proportion recomended by the manufacturer including finishing with a flaoting coat of neat Only

cement slurry. FOR ALL FLOORS

Providing & laying acrylic based (Zycosil or equivalent ) modified cementitious composite coating system in two coats.1st coat 352.00 SMT

Rs. One Hundred Ten & Paise Seventy

8 shall be acrylic polymer & cement & second coat shall be of acrylic polymer ,cement & silica sand.The application of both the

coats shall be as per manufacturer's manual.

Providing CEMENT VATA ( 10cm x 10cm )size quarter round in cement mortar 1 : 1 including neat cement finishing, watering 536.00 RMT

9 Rs. Twenty Three & Paise Forty Five Only

Providing and filling light weight filling material (CINDER) an approved in sunk slabs or as may be directed at all floors 49.00 CMT 791.68 Rs. Seven Hundred Ninety One & Paise

including watering, consolidation etc.. Complete. Sixty Eight Only

Providing & laying Cement Concrete flooring 1:2:4 (1- cement 2; sand 4- M/c graded stone aggregate of 20 mm nominal size) Rs. Three Hundred Forty Eight & Paise

laid in one layer finished with a floating coat of neat cement (B) 50mm thick. Eight Only

Providing and laying Anti skid Ceramic tiles (Non Skiding) 8 mm to 10mm thick in Floorings, treads of steps and landing laid 163.00 SMT

on a bed of 20 mm thick cement mortar 1:3 (1 - cement: 3- coarse sand) finished with flush pointing in the colour as specified Rs. Nine Hundred Sixty & Paise Forty

etc. complete in white cement for All Floors. Size and shade shall be as per the instruction of Engineer - In - Charge. Seven Only

Provinding & laying Printed Coloured GLAZED TILES 8mm thick in skirting, risers of steps and DADO on 10mm thick cement 1325.00 SMT

Rs. One Thousand Forty Four & Paise

13 plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed with white cement slurry. including curing for all Floors (Material Shall be

Twenty Three Only

Used as Approved By GSPHCL Only )

Providing & Fixing FRP frame size 100x50mm and 28mm thick FRPshutter having extra rainforcement on side and edge 61.00 SMT

ingood coat finishing.the core of the shutter and frame is to be filled up with injected fire retardent grade polythelene foam

done in situ.along with emdedded wooden pieces for stiffing and also taking stainless steel hinges & fixtures The whole FRP

frame & shutter is to be water proof ,whether proof ,termite proof and resistant to mild acid alkli,rate are to be inclusive of s.s. Rs. Two Thousand Three Hundred Fifty

hinges ,fixtures & fastening 4 NO. of hinges (100mmx 58mmx1.9mm)Two NO. of Aldrop of 200 mm x 16 mm, Stopper 150 Four & Paise Twenty Two Only

mm x 10 mm & Handle 125 mm long product shoud have 3 yers perfomnce gaurntee and company have ISO 9001-2000

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 160.00 RMT

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the Rs. Two Hundred Two & Paise Ninety

wall, ceiling and floor etc. complete. Pipe shall be concealed or open as mention in tender description. Pipe shall be as per Seven Only

approved make of GSPHCL make list. 20mm Dia

Sr No. Description

Unit Rate Rate in Words Total Amount

Unit Rate Rate in Words Total Amount

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 200.00 RMT

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the Rs. Two Hundred Forty Seven & Paise

wall, ceiling and floor etc. complete. Pipe shall be concealed or open as mention in tender description. Pipe shall be as per Twenty Five Only

approved make of GSPHCL make list. 25mm Dia

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 100.00 RMT

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittingswith Z patti (Minimum 1.6mm thick) with Rs. Four Hundred Thirty Seven & Paise

6mm Dia U Clamp with washer for Vertical water supply pipe. Pipe shall be concealed or open as mention in tender Sixty Six Only

description. Pipe shall be as per approved make of GSPHCL make list 40mm Dia

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 194.00 RMT

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittingswith Z patti (Minimum 1.6mm thick) with Rs. Six Hundred Forty Seven & Paise

6mm Dia U Clamp with washer for Vertical water supply pipe. Pipe shall be concealed or open as mention in tender Thirty Only

description. Pipe shall be as per approved make of GSPHCL make list 50mm Dia

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 25 mm dia. Rate are inclusive of all 12.00 NO

Rs. Four Hundred Sixteen & Paise Forty

19 matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. All material used as per approved make list by GSPHCL. Seven Only

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 40 mm dia. Rate are inclusive of all 4.00 NO

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Rs. Six Hundred Fifty Six & Paise Eighty

Engineer In charge. All material used as per approved make list by GSPHCL. Six Only

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 50 mm dia. Rate are inclusive of all 4.00 NO

Rs. Two Thousand Three Hundred Two &

21 matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of

Paise Thirty Three Only

Engineer In charge. All material used as per approved make list by GSPHCL.(50 mm dia)

Providing & Fixing 15mm One way Bib Tap with WAll Flange. Rate are inclusive of All matreials, Labour & Necessary Fittings 56.00 NO

Rs. Nine Hundred Ninety & Paise Sixty

22 etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make of

Bib Tap Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 28.00 NO

Rs. One Thousand Three Hundred Nine &

23 Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make of

Paise Thirty Nine Only

Two way Bib Tap Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S" Trap including Jointing the Trap with 28.00 NO

Pan and Soil pipe. Wall hung shall be fixed on S.S heavy duty rack bolt having 16mm dia, 165mm length using Plastic sleeve

Rs. Five Thousand Four Hundred Seventy

24 Make by Using Drill Bitt Only. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed

& Paise Ninety Only

Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make of Wall Hung & Flush Tank

Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete 28.00 NO

Rs. Five Hundred Sixty Five & Paise Fifty

25 as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make of Health

Faucets Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Angle Cock with Wall Flange . Rate are inclusive of allmaterials, Labour & Necessary Fittings etc. 40.00 NO

Rs. Six Hundred Sixty Five & Paise Fifty

26 Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make of

Angle Cock Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling with Connection 32mm dia waste Pipe 12.00 NO

etc. Complete. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Rs. Two Thousand Ninety Eight & Paise

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Urinal Shall be as per the Approved Ninety Eight Only

Make List of GSPHCL.

Providing & Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 90mm Dia Complete including making 384.00 RMT

good the ceiling and floor on terrace rain water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical pipe and 90mm Rs. Three Hundred Twenty Three & Paise

bend at the end near by Ground level rate are Inclusive of all Necessary Fittings required. pipe As Per approved Material List Fifteen Only

Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe with "O" ring of ISI13592/92, Rate inclusive of all 128.00 RMT

Rs. Two Hundred Sixty Four & Paise

29 fittings like single or double "Y" with door, reducer, coupler single T with door bend etc.complete and making good the wall

Ninety Seven Only

ceiling and floor. (A) 75mm dia

Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe with "O" ring of ISI13592/92, Rate inclusive of all 128.00 RMT

Rs. Four Hundred Ninety Five & Paise

30 fittings like single or double "Y" with door, reducer, coupler single T with door bend etc.complete and making good the wall

Ninety One Only

ceiling and floor. (A) 110mm dia

Providing & Fixing PVC Multi nahni trap- 100 mm dia. With SS jali of the following nominal diameter of self cleansing design 32.00 NO

with all necessary fittings etc complete as per direction of Engineer in charge. Including with Providing and fixing floor drain jali

Rs. One Thousand One Hundred Twenty

31 (Glossy Finish) (On N.T. or Multi trap) of 6" X 6" size made of stainless steel Grade 304 floor drain 3 piece (Cover/jali/Grating)

Two & Paise Twenty Six Only

with anti cockroach bowl on N.T. or Multitrap. Rate are inclusive of all necessary fittings, material, labour etc. complete as per

direction of engineer in charge.

Sr No. Description

Unit Rate Rate in Words Total Amount

Unit Rate Rate in Words Total Amount

Provinding and fixing in position SWR/UPVC COWEL VENT to pipe 75 mm dia directed. 8.00 NO

32 Rs. Sixteen & Paise Forty Seven Only

Provinding and fixing in position SWR/UPVC COWEL VENT to pipe 110 mm dia directed. 8.00 NO

33 Rs. Twenty Eight & Paise Sixteen Only

Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface (two coats) to give an required shap even 126.00 SMT

shade after throughly brushing the surface to remove all dirt and remains of loose poweder material etc. complete. Rate are

inclusive of applying two coat of lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to give and even shade Rs. One Hundred Eighty Six & Paise

including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. Twenty Six Only

Putty, Primer And Paint As Per The Approved List Of GSPHCL.

Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required shap even shade after throughly 443.00 SMT

brushing the surface to remove all dirt and remains of loose poweder material etc. complete. Rate are inclusive of applying

two coat of lapy (Putty) and one coat of primer on new wall surface to give and even shade including thoroughly brushing the Rs. One Hundred Seventy Six & Paise

surface free from mortar dropping and other foreign matter and sand papered smooth. Putty, Primer And Paint As Per The One Only

Approved List Of GSPHCL.

Finishing wall with weather proof exterior emulsion paint on wall surface ( two coats ) over and above applying One Coat Of 6138.00 SMT

Primer to give an requaired shape even shade after thoroughly brushing the surface to remove all durt and remains of loose Rs. One Hundred Forty Seven & Paise

powedered materials etc. cpmplete . Primer and Paint as per the approved list of GSPHC. Sixty Eight Only

Providing & Laying Damp Proof Suprema white on Terrace Surfaces (Two Coats) over and above Applying one coat of Primer 1173.00 SMT

to give an Required Cleaning of Terrace and Open old vata of china mosaic after thoroughly brushing the surface to remove

all dirt, and remains of loose powdered materials etc. complete. Primer and Damp Proof shall be used as per approved

37 material list of GSPHCL or Engineer Charge. The whole terrace so finished shall be flooded with water for a minimum period Rs. Four Hundred Nine & Paise Thirty Only

of two weeks for curring for final taste. Rate is including ten years performance of guarantee bond to be given on stamp Paper.

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I. fisher union, P.V.C water pipe with Connection 16.00 NO

from Stop Cock to Pillar Tap, PVC Bottle Trap with Connection 32mm dia. C.P. brassa waste coupling etc. Complete. Rate

Rs. Three Thousand Nine Hundred Thirty

38 are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per

Five & Paise Thirty Three Only

the Instruction of Engineer In charge. The Model & Make of Wash Basin Shall be as per the Approved Make List of GSPHCL.

Including Pillar Cock, Angle Cock, Bottal Trap etc.

Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level consisting 12 mm thick backing coat of 952.00 SMT

Rs. Two Hundred Ninety Seven & Paise

39 C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height.

Sixty Eight Only

40A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq.

mm (green) copper PVC insulated FRLS wire for earth continuity in existing pipe with approved make 5/6 Amp. ISI make

modular type switch and accessories mounted in 20 G. G.I. company fabricated metallic box covered with appropriate front

plate modules erected flushed/surface with wall / ceiling with necessary modular lamp holder / modular ceiling rose / HD

Connector (make and model approved to be approved by EIC) as directed for open/concealed wiring.Length of point wiring

must not increase than 10 mtr. For that necessary switch boards and their locations must be finalised before execution by 125.00 Point 372.00 RS: Three Hundred Seventy Two only

agency otherwise payment will not be done for extra long point. (For future extention, if required, agency has to erect one

higher size metal box and modular plate as per instruction of EIC. Cost of blank plate shall be paid as per tender item) [Wire

must be having box packing in existing pipe erected flushed on wall/ceiling complete Light point. Cat.-III.

40B For Secondary Light Point Cat-III( in existing pipe)

5.00 Point 84.00 RS: Eighty Four only

40C For separate Point (with 6 Amp. Switch & 5 pin socket both having ISI Make) Cat-III ( in existing pipe)

5.00 Point 385.00 RS: Three Hundred Eighty Five only

40D For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket) (Cat-III) ( in existing pipe)

10.00 Point 255.00 RS: Two Hundred Fifty Five only

Sr No. Description

Unit Rate Rate in Words Total Amount

Unit Rate Rate in Words Total Amount

41 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 sq.mm copper PVC insulated

FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS wire for earth continuity in FIA approved ISI mark white colour

medium class 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected in wall/slab

along with continuous G. I. fish wire to draw wires and laid in approved manner zari for PVC pipe & boxes shall be filled with

cement mortar & finishing the surface to match the wall / ceiling complete with 16 Amp Modular type Swich and accessories

mounted in 20 G. GI company fabricated metallic box covered with appropriate front plate modules erected flushed with wall. 14.00 Point 526.00 RS: Five Hundred Twenty Six only

(a) 16 Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3/5 pin top duly both having ISI

mark. (Necessary sheet / tape / polythene / sand must be erected or filled in all box To Prevent Mortor Going In To The Box)

Cat.-III. (Conductor resistance should be as per IS:8130/1984)

42A Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID PVC PIPES of following

size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution. concealed in wall / slab

along with continuous fish wire to draw mains, laid in approved manner. Zari for PVC Pipe & Boxes shall be plastering by 200.00 Mtr. 24.00 RS: Twenty Four only

cement mortar & finishing the surface to match the wall / ceiling. 20 mm dia.

42B For 25mm dia.

150.00 Mtr. 33.00 RS: Thirty Three only

43A Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking

of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly 80.00 Mtr. 22.00 RS: Twenty Two only

sealed in joint & erected on wall / ceiling of following size .(1) 20 mm

100.00 Mtr. 31.00 RS: Thirty One only

44 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free

& flame proof confirming BS .All necessary accessories and measuring of following sizes. For 100 mm x 50 mm trunking (MK, 80.00 Mtr. 424.00 RS: Four Hundred Twenty Four only

LEGRAND, OBBO make Only])

45A Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with FIA approved ISI mark medium

class 20/25/32 mm dia. embossed rigid PVC casing capping with PVC fitting fixed with adhesive solution to be erected on/in

brick wall / slab along with continuous G. I. fish wire to draw mains laid in approved manner with plastering by cement mortar

& finishing the surface to match the wall / ceiling complete with FRLS PVC insulated wire for earth continuity. (Approved ISI

make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi 250.00 Mtr. 46.00 RS: Forty Six only

stranded conductor for earthing as per standard colour code. -In Existing Pipe(with 20 mm dia. PVC pipe) [Wire

must be having box packing]

45B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code.-In Existing Pipe [Wire must be having box packing]

100.00 Mtr. 120.00 RS: One Hundred Twenty only

46 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of wattage 0.2W to 0.5W assemble on single

MCPCB with housing use as a heat sink shall be made from Aluminum extrusion having enough strength (sample must be

approved by EIC) with polycarbonate diffuser with following specification: (A) Company mark/name on the fitting.(B) Rated

input voltage and frequency: 220V to 240 VAC ; 50Hz.(C) Rated input wattage: max. 24w(D) Rated input current : 0.2 Amp

(E) Power Factor : Min. 0.90(F) ATHD : Max. 15%(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @ L70(L) Over Voltage

protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge protection : Min. 2KV

(N) IP rating: IP 20(O) IK rating : IK 02(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided(Q) Fixing 45.00 Each 370.00 RS: Three Hundred Seventy only

clamp design & strength should be sufficient to hold the fitting erected on wall or ceiling.(R) 3 core copper wire of appropriate

size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item specification]

Sr No. Description

Unit Rate Rate in Words Total Amount

Unit Rate Rate in Words Total Amount

47 Providing and erecting max. 10 W LED battern having main housing aluminium extruded and front cover of polycarbonate.

Electrically and photomatry parameters are as under:240 V, 50 Hz. System wattage.:10W+10%, PF>=0.95, system lumens

min. 1000, CCT- 3000K to 6500K, CRI>=80, THD<=15%, Delivery efficiency>=85%, LM 80 certified LED, 30000 Hrs@ L70,

Electronic CC driver, insulated copper wire, for internal wiring, IP20 Operating voltage:160 to 270 V, Surge-2 KV, length of this

fitting should be 2ft.

Luminaire efficacy> 85 lumens/watt ,LED 10.00 Each 309.00 RS: Three Hundred Nine only

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) Tube

Light with integral driver 8 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

48 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours

life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A)

55.00 Each 111.00 RS: One Hundred Eleven only

LED Lamps integral type, with PC diffuser suitable LAMP holder

49 Supplying and erecting approved make 200mm sweep low noise decorative exhaust fan having Aerodynamically

designed and Blanced Blade, Blade finish Opaque,body colour White , finish Glossy , Rated Speed 1800 revolution per

minute ,air delivery 500m³ / hr , noise level 50 dB , Power Consumption 35 W, ,Rated Voltage 230 V , no. of blades 7

RS: One Thousand Six Hundred Eighty

guard 18 Louvers , square frame ABS body with inbuilt lowers and square frame.( Havells Make Ventilair LX or Bajaj, 20.00 Each 1687.00

Usha, Crompton and Equivalent Model Approved by EIC subject to Above Specification )

50A Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft soil. Suitable for doing

pipe-in-pipe technology earthing.Earthing electric rod must be made from Corrosion free Hot dip galvanizing pipes having

following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm

minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from

inner pipe for that pipe must be pressed and gave rectangular shape so its work as a terminal.The hot deep galvanising must

be done after above process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer

suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of earth electrodewith inside 2.00 Each 7025.00 RS: Seven Thousand Twenty Five only

conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time Back Filling Compound weight

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth and Cover should be heavy

duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with earth tester. Agency has to

bring the earth resistance to at least 02 ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain

earthing & its value for one year. Earthing must be done in the presence of A.E. (GSPHCL)]

50B For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in earth pit (certificate for soil

have to given by DEE / AE along with photographs)

2.00 Nos. 276.00 RS: Two Hundred Seventy Six only

51 Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS:694, IEC - 227 erected in existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. for One 100.00 Mtr. 91.00 RS: Ninty One only

wire 10.00 sq. mm

Sr No. Description

Unit Rate Rate in Words Total Amount

Unit Rate Rate in Words Total Amount

52 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity for 40Amp

16.00 Each 327.00 RS: Three Hundred Twenty Seven only

53 Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly powder coated with gasket,

dust & vermin proof bakelite shield two earthing terminals for following type of RCCB, RCCB + MCB for 4 Pole 8.00 Each 442.00 RS: Four Hundred Forty Two only

54 Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with red oxide be concealed in wall with necessary

plastering & finishing covered with 3mm thick Laminated sheet with grooving as directed of following depth. 3" Depth 500.00 sq inch 5.94 RS: Five and Paise Ninty Four only

55 Dismantling the existing light, fan, bell, , independent plug point, wiring with mains of all types along with accessories etc.

complete and handed over to dept.

100.00 point 1.00 RS: One only

56 Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down rod, frame etc.

and making the site clear. 50.00 point 9.00 RS: Nine only

TOTAL CIVILAMOUNT=

TOTAL ELECTRICAL AMOUNT=

TOTAL CIVIL + ELECTRICAL AMOUNT=

SIGNATURE OF CONTRACTOR

Asst. Engineer Dy.Exe. Engineer Executive Engineer

Ahmedabad Ahmedabad. Ahmedabad.