bus que shelter fixing work at various places between paota to mandore

Providing and Fixing Antiskid, Pre-polished cement concrete designer tiles 22 to 25 mm thick and design pattern of make Ultra for Bus shelter tactile tiles to also be laid at provision for physical challenged as approved by the Engineer-in-charge. These should be cleanable acid resistant and fixed without grove and grout and should look like joint less as per manufacturer instructions laid over bed of 25mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) complete as directed by Engineer-in-Charge.

Providing and Fixing factory manufacturered rubber moulded precast colourful concrete kerb of size 450mm x 300mm having 150mm thickness duly vibrated, mechnically and compacted Made of M-30 duly cured and finished. The item further include filling of joints between kerb with cement mortar 1:2 and bed of 100mm thick P.C.C. 1:3:6 complete in all respects and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing anodised aluminum 25x50mm channel frame with 40W standard manufactured tubelight fittings with electronic choke starers and wiring all complete connected to electrical supply drom feeder box with minimum 4 tubelights x per square meter (of add panel size) or actual requirements decided by the engineer in charge. The tubelight frame and fittings (including that in feeder pillar) should include ballast ELCB timer MCB mounting blocks etc. The tubelight alignment should allow two way lighting (front and back) of add panel.NS

Providing and fixing various member of material shall be austenitic stainless steel of Grade UNS32101 ( with increased strength, good corrosion resistance) with Rp0.2 value 450 MPa and PREn number 26, (as per specification) complete in all respects and to the entire satisfaction of the Engineer in charge.NS

Providing and fixing heavy duty SS prefabricated dust bins with canopy and two point support grouted in cement mortar and finished as per floor finish.

Providing and fixing 5-walled, 10mm thick Polycarbonate Multiwall Sheet Bronze colour having a light transmission of 37%, with a U-value of 2.39 W/m2K. Lexan Thermoclear Multiwall sheet LT2UV105R175 from SABIC Innovative Plastics or Equivalent. fixing of the 10 mm sheet to be done with profiles having EPDM/ slicon.Alluminum profiles need to use and front and rear of ploycarbonate sheet has to be closed by aluminum profile.

Providing and pasting at site high grade printed vinyl with bus shelter name logo, route numbers etc. on one sides of the front facia information board. The vinyl shall be minimum 85 micron thick, of LG or equivlent make complete in all respects and to the entire satisfaction of the Engineer in charge.

Aluminum Signage of size m made of 6063-T5 Aluminum Frame with section weight 3.8 to 4.00 kg/meter with minimum tensile strength of at least 22,000 psi. As per drawing provided having 4 mm Clear sold Compact polycarbonate in front and 3mm ACP sheet at rear completely sealed with the help of silicon or EPDM to make it Dust and water proof, IP65 certification. Should have the inbuilt STRONG clipping & frame arrangement for holding the flex or digital media along with all necessary cleats and corner joinery require to build the signage with sufficient strength. The aluminum frame should have strong locking arrangement which can Resist theft. The Aluminum frame should have PVDF(Poly vinyli dene fluoride) coating as per ASTM D3222. The signage should have in built arrangement of mounting it with the bus shelter structure.

Vandal Resistant light source with aluminum and polycarbonate body with compect florescent lamp of white colour of 55 W including cables fixing switchgear etc. all complete