ADDN/ALTN TO BATHROOMS OF SUKTHANKAR BLOCK AT SIGNAL SCHOOL, DRAINS AND LEVELLING OF ADJACENT AREA NEAR DRAINS IN ASW SCHOOL, MAIN ENTRANCE GATE AND SUSHRUTA GATE AND PROVISION OF CONCERTINA COIL AT NAVAL BASE, KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tk screed bed of CM 1:6 all as specified and as directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 300x450x7 to 8mm thick in vertical surface set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade over 10 mm thick rendering CM 1:4 all as specified and as directed.

Taking down Chowkhats or frames n exc. 1.5 Sqm each, but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkhats or frames exc. 1.5 Sqm each, but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F Powder coated aluminium frame for door/window with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Note:- The quoted rate shall be deemed to be inclusive of sealing the gaps between aluminium frame and wall with silicon selant of make Dr. fixit or equivalent make

S & F Powder coated aluminium window/ventilator shutters side hung type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, screws, powder coated fitting such as peg stays 150 mm long (1 no.), Stainless steel frictional hinges , tower bolt 100mm(2 Nos), suitable handle (1 no.) complete all as specified and as directed.

M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beeding in squares exceeding 0.5 sqm each pane fix to wood/aluminium joinery complete all as specified and directed.

S&F aluminium anodised DECO grill 10mm thk,DG-104 fixed with necessery U/F/H channel etc complete all as specified and as directed.

S&FAluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples and including II nd class hard wood/aluminium beads straight (any size) for glazed or gauged joinery , renewed including mitrted etc complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.

S&F extruded aluminium alloy handle 150 mm fabricated type anodised complete all as specified and as directed.

S & F Butt hinges Stainless Steel 100mm complete all as specified and as directed.

M&L for 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for APP modified water proofing membrane mineral finish, 3mm thick and weighing not less than 3.6kg/Sqm reinforced with non woven polyster matt black finished weighing not less than 100gm/ Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300N/ Sqcm side lap & end lap 15cm over coat of bitumen primer "0.20KgSqm & applying a coat of blown grade bitumen 90/15 over the membrane " 1.2Kg/Sqm & finishing with aluminium paint applied at the rate 0.10Kg/Sqm & finished all as specified and directed

M&L for cement concrete Type D2 1;4;8 using 40mm graded aggregate as in foundations,fillings and mass concrete complete all as specified and as directed.

M&L for plain cement concrete 40mm thick type B-1, 1:2:4 (20mm graded stone aggregate) slab flooring with using WPC , bedded, and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and as directed. Note:- WPC shall be measured and paid seperately.

Rendering 20mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC@130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR or equivalent cement slurry for roof slab/floor complete all as specified complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid seperately.

Supply only Liquid water proofing compound complete all as specified and as directed.

S&F in repairs bottletrap of 32mm dia PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and as directed.

Supply and fixing in pillar taps, swan neck spout with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and directed by the Engineer-in-charge.(Make : Model No:F2004105 of Cera or equivalent makes mentioned in list of makes).

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs vitreous china urinals white half stall type including all fittings complete all as specified and as directed.

S&F in repairs CP push cock screwed down, screwed for iron pipe of brass ferrule and fixed 15 mm bore complete all as specified and as directed.

S&F in repairs PTMT urinal spreader of any colour suitable for 15 mm bore fixed with urinal including CP pipe complete all as specified and as directed.

S&F Chinaware partition for urinal of size 310 x 700 mm complete all as specified and as directed.

S&F in repairs viterous China wash down water closet pan (pedestal pattern), white incl plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern duel type 10 litre capacity, low level, white, with inlet, ball valve, float & handle incl brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern duel type 10 litres , low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S & F in repair soap dish holder complete all as specified and directed Make - Jaquar Cat No-AKP-35731P or equivalent manufactures listed in list of makes)

S&F in repair PVC (SWR) floor trap 75 mm plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings complete all as specified and as directed.

S&F in repair PVC (SWR) bends 75 mm dia single socketed in any length , with rubber rings complete all as specified and as directed.

S&F in repair PVC (SWR) bends 110 mm dia single socketed in any length , with rubber rings complete all as specified and as directed.

Taking down cement plaster on brick/ concrete walls incl raking out joints, hacking for key, srubbing down with water etc complete all as specified and as directed.

M&L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement for internal faces of walls complete all as specified and directed.

M&L for preparation new plastered internal surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation and complete removal of existing treatment and applying two coats of Interior Emulsion (Asian Rayale interior enulsion) over a coat of primer and 3mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Complete removal of old decorated surface of ceiling including cornices (Plastered or unplastered) and applying Chalk whiting, on plastered surfaces, prepara-tory to distempering and two coat of distemper oil-emulsion all as specified .

Dismantling structural steel members such as channels angle iron flat etc and steel sections of any description by gas cutting or other means all as specified and directed.

S & F MS rolled section such as ‘C’ channel angles flat iron fixed with bolt or nut or welded confirmed to Fe-410 W (gde-250) quality B as in frame work as in gratings,doors or gates of angle or other sections with gusset plates,rails braces etc complete drilled for fixing barbed wire in fencing complete all as specified and as directed.

M&L for preparing of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying 2 coats of epoxy paint over a coat of epoxy primer at any height all as specified & as directed .

M&L for complete removal of old steel paint surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of epoxy paint over a coat of epoxy primer at any height all as specified & as directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick cement concrete type D2 1:4:8 with 40mm graded aggregate as in sub base complete all as specified and as directed.

M & L for chequered colour cement concrete tiles 30x30cmx 25mm thick set jointed grey and pigment and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of morter 15mm thick in cm 1:4 complete all as specified and directed

M&L 25 mm thick cement concrete type BO 1:2:4 using 12.5 mm graded stone aggregate as in below tiling complete all as specified & directed.

M&L for light shade vitrified ceramic tiles 10 mm thick(square/rectangular) polished, area of each tile exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laying in any design over and including 10mm thick cement screed 1:4 complete all as specified and as directed.

All as per item No: 55 above but as in skirting complete all as specified and as directed.

Dismantling of stone slabs and tiles , paver block of any description or thickness in floors, aprons etc laid dry and pointed in any mortar complete all as specified and as directed.

M&L for Coarse aggregate for granolithic floors graded from 6mm and below under floors or in foundations spreading and levelling in layers n exc. 0.5 cm thick incl well ramming including watering as required complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS standards of 60mm thickness, M-35grade, laid over with grey cement and pigments complete all as specified and as directed.

Labour only for fixing machine pressed precast concrete interlocking paver block any shape and size confirming to IS standards of 60mm thickness M 35 grade laid over with grey cement and pigments complete all as specified and as directed.

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Demolition of brick work in cement mortar complete all as specified and as directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc, n.exc 10sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers in soil complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level as directed

M&L precast cement concrete 1:3:6 type C1 using 20mm graded stone aggregate solid block masonry built in cement mortar 1:4, exc 10 cm in width complete all as specified and as directed.

M&L plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregates coping including necessary form work complete all as specified and as directed.

M&L rendering 15 mm thick on brick or concrete surface in cement mortar 1:4, finished even and smooth complete all as specified and as directed.

M&L reinforced concrete pipes class NP2 of dia 600 mm dia , laid and jointed complete with collars complete all as specified and as directed.

Taking down concertina coil along with barbed wire of any dia and type fixed with steel/iron fittings all as directed by E in C.

S & F Concertina coil 715mm outer dia in closed condition and stretch to 700mm dia and 8.00m length. The core wire dia shall be 2.59mm galvanised with 240 gm/Sqm of zinc coating, the weight of each shall not be less than 8.57 Kg (plus or minus 5%) and shall contain 50 turns per 8m length with fixing clips all as shown on drg and as specified (Note : The cost of clips is included in the rate quoted against the item). complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L rendering 8 mm thick CM 1:4 with approved water proofing compound over backing coat of 12 mm thick in CM 1:6. mm thick plaster on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation new plastered external wall surfaces and apply one coat of primer over 2mm thick exterior cement putty and allowed to dry overnight before applying first coat of wethaer proof (anti fungal paint) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of weather proof paint (anti fungal paint) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac )on primed wall surface using spray application or mechanical means, to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of weather proof paint (anti fungal paint) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) over first coat on wall surface using spray application or mechanical means, to get a smooth and tint free surface complete all as specified and as directed.

M&L for complete removal of existing suracfe finishes of external wall and apply one coat of primer and allowed to dry overnight before applying first coat of weather proof (anti fungal paint) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of weather proof paint (anti fungal paint) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac )on primed wall surface using spray application or mechanical means, to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of weather proof paint complete all as specified and as directed.

M&L for application of second coat of weather proof paint (anti fungal paint) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) over first coat on wall surface using spray application or mechanical means, to get a smooth and tint free surface complete all as specified and as directed. Note for item No. 74 to 79:- The quoted rate shall be deemed to be inclusive of the folowing:- (a) Scaffolding upto a height of G+6 floors (b) Spray application/mechanical means of application (c) The items shall be executed by authorized applicator only

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M 40 grade with grey cement and pigment complete all as specified and directed.

M&L for granite (of any type) work (Table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F for stainless steel letters (grade 202/304 size 6" top to bottom width 3-4") matt/gloss/mirror finish fixing with nuts and bolts complete all as specified and as directed.

M&L for providing and fixing stainless steel (grade 304) railing made of hollow tubes,channels,plates etc including welding grinding,buffing polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete for gates,including fixing the railing with necessary accesories & stainless steel dash fasteners,stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement

M&L for cement concrete in surface channel and drains in PCC 1:2:4 complete all as specified and as directed.

M&L moorum/red bajri filling in floor or pavings laid in layers n exc 15cm thick spreading levelling and rammed including watering complete all as specified and as directed.

M&L surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft loose soil all as specified and as directed.

External Electric supply Supply and Laying XLPE insulated galvanised steel strip or wire armoured elctric power UG cable with stranded aluminium conductor 1100 V grade of size 10 sqmm 4 core complete all as specified and directed

Cutting existing road/hardstand of any type by using crow bar chisel etc not exceeding 45 cm wide and not exceeding 1.5 mtr depth for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed. (GI pipe will be measured and paid separately)

S&F LED Flood Light 90W-ORANGE LED flood light with cast aluminum housing, toughened glass cover, Mid power ORANGE COLOUR LED, secondary optics, IP65/66, 10KV SPD, >100 lm/watt, and wired with all accessories complete with base plate and foundation with enamel white paint bolts and nuts including earth work and PCC foundation compete all as specified and directed by Engg-in-Charge. Shakti model No Auris SZCFLMH090 or its equivalent make mentioned in list of makes

S&F LED Flood Light 90W-GREEN LED flood light with cast aluminum housing, toughened glass cover, Mid power -GREEN COLOUR LED, secondary optics, IP65/66, 10KV SPD, >100 lm/watt, and wired with all accessories complete with base plate and foundation with enamel white paint bolts and nuts including earth work and PCC foundation compete all as specified and directed by Engg-in-Charge. Shakti model No Auris SZCFLMH090 or its equivalent in Bajaj/CG.

S&F LED Flood Light 90W--COOL WHITE LED flood light with cast aluminum housing, toughened glass cover, Mid power --COOL WHITE LED, secondary optics, IP65/66, 10KV SPD, >100 lm/watt, and wired with all accessories complete with base plate and foundation with enamel white paint bolts and nuts including earth work and PCC foundation compete all as specified and directed by Engg-in-Charge. Shakti model No Auris SZCFLMH090 or its equivalent make mentioned in list of makes

S&F, junction box made of glass fibre reinforced and transparent poly carbonate of size 126 x 228 x 111, KV PC 8104 with IP 65 protection including MCB SP, 10 Amps 1 No and suitable size clamps fixing for pole/in pcc foundation etc,,all as specified and as directed.

M&L PVC insulated copper conductor 3 core 1.5 sqmm cable to be drawn inside the pole , including taking down of old one, all as specified and as directed.

S&F Tricolor rope light pre fitted orange , white and greeen LED to give impact of tricolor The luminous shall have IP 56 protection 6 watt /mtr there should be 72 LED /m for uniform light output and no dark spots and wired with all accessories compete all as specified and directed

S & F in replacement tri colour light column 50W LED TRI 4M LED Light Column with die-cast aluminum pipe housing with cylindrical opal polycarbonate di user designed for rugged outdoor usage & IP 65 protection with Tricolor and tratic white output switch and wired with all mountings and accessories including foundation with enamel white paint complete for fixing including taking down old unserviceable fitting complete all as specified and directed by Engg-in-Charge. Bajaj model No BLSLC 50W LED TRI 4M or its equivalent makes in list of makes

S & F in replacement LED post top gate light of capacity 40W 3000K antiquely designed aesthetically appealing landscape made from aluminium housing, clear polimer diffuser to provide uniform and pleasant light output with IP 65 protection complete for fixing including taking down old unserviceable fitting complete all mountings and accessories all as specified and directed.

Sand cushioning and covering of UG cable using river sand in trenches for cable protection all as specified and directed. Note: Punned depth shall be measured and paid.

Supplying and laying reinforced precast concrete cable cover,Class LV, Type 1, flat, size 250mm x 150mm x 40mm complete all as specified and directed

Supply and fixing GI pipe light grade with necessary fittings in floor /piller/fixed on pole of size 40 mm dia complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed

M/L for earthing complete with galavanised steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr below ground level) with top edge of eath plate not less than 1.5mtr below ground level, connected to galvanised iron strip 32 x 6mm as earthing lead by means of bolts, nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C 1 using 20mm raded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80mm thick RCC pit cover 320mm x 320mm of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinformed with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR part -I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point/ transformer nuetral/body/ LT panel etc. and tesing on completion, complete all as specified & directed.

Supply & install, testing and commissioning indoor type floor mounted LT panel (Make:CPRI approved manufacture) suitable for 415 volts, 3 Phase 4 wire, 50 Hz AC supply sysytem conforming to IS : 8623/93, floor mounted, factory made, weather and vermin proof, fully ventilated and fabricated out of angle iron 40mm X 40mm X 6mm thick frame work and CRCA sheet 2mm thick having Aluminum bus bar of rating 400 Amps,three phase and one neutral fixed on isulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the outer shell should not less than 1500mm X 1000mmX 500mm, mounted on angle iron stand made out of size 40mm X 40mm X 6mm grouted of digital volt meter & AMps meter with CTs including following items and taking down of old existing panel complete all as specified and directed:- (A) INCOMING (a) MCCB , 4 pole 250 Amps, 36KA breaking capacity -01 No (b) RYB LED indicating lamp panel mounting type (Set of 3) - 01 No. (c) VAF + PF Meter with CT & control MCBs- 01 set (B) OUTGOING (a) MCCB, 4 pole 160 Amps, 25KA breaking capacity - 03 Nos (b) MCCB, 4 pole 125 Amps, 25KA breaking capacity - 03 Nos (c) RYB LED indicating lamp panel mounting type (Set of 3) - 01 No. (d) VAF + PF Meter with CT & control MCBs- 01 set

Supply & install, testing and commissioning indoor type floor mounted LT panel (Make: CPRI Approved manufacture) suitable for 415 volts, 3 Phase 4 wire, 50 Hz AC supply sysytem conforming to IS : 8623/93, floor mounted, factory made, weather and vermin proof, fully ventilated and fabricated out of angle iron 40mm X 40mm X 6mm thick frame work and CRCA sheet 2mm thick having Aluminum bus bar of rating 250 Amps,three phase and one neutral fixed on isulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the outer shell should not less than 1500mm X 1000mmX 500mm, mounted on angle iron stand made out of size 40mm X 40mm X 6mm grouted of digital volt meter & AMps meter with CTs including following items and taking down of old existing panel complete all as specified and directed:- (A) INCOMING (a) MCCB , 4 pole 160 Amps, 25KA breaking capacity -01 No (b) RYB LED indicating lamp panel mounting type (Set of 3) - 01 No (c) VAF + PF Meter with CT & control MCBs- 01 set (B) OUTGOING (a) MCCB, 4 pole 125 Amps, 25KA breaking capacity - 04 Nos (b) RYB LED indicating lamp panel mounting type (Set of 3) - 01 No. (c) VAF + PF Meter with CT & control MCBs- 01 set

Internal Electrification/Internal water supply Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sheet metal encl. with plug & socket etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified & directed.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including chases cutting incl suitable for modular switch and socket (sunken box) modular white cover plate,flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point conrtolled by one switch complete all as specified & directed.

All as per item No: 108 above but for One fan point / exhaust fan point controlled by one switch & regulator complete all as specified & directed.

All as per item No: 108 above but for One 5 pin 5 Amps socket point controlled by one switch on independent board complete all as specified & directed.

All as per item No.108 here in above with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board complete all as specified & directed.

S & F modular switch 1 way 6 Amps,1 module type complete all as specified & directed.

S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified & directed.

S & F socket modular 6 Amps and 2/3 pin combined 2 module complete all as specified & directed.

S & F Modular socket 6 A/ 16 A - 2/3 pin combined 2 module complete all as specified & directed.

S & F Modular type switch 15 A One way SP complete all as specified & directed.

Taking down existing Light fittings of any type and size and removing to store yard complete all as specified & directed.

S&F LED fittings 20W 4 ft ISS LED linear battern (aluminium) with smart sensor in built sensor based LED auto dimmable battern made from powder coated extruded aluminium housing opaque glare free diffuser prewired with all accessories complete all as specified and as directed.Make: Shakti cat part No. SZLAMX010 ISS or Baja/Havells.

S&F LED fitting 10W 2 ft ISS LED Linear battern (Aluminium) with smart sensor,in built sensor based LED auto dimmable battern made from powder coated extruded aluminium housing opaque glare free diffuser prewired with all accessories complete all as specified and as directed. Make : Shakti cat part No. SZSLAMZ010 ISS orBajaj/Havells

Supply & fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, 1400 rpm complete including taking down all as specified Make Havells cat part No Turbojet SP /CG /Usha Note:- Old exhaust fans will be deposited in MES store yard

Taking down unserviceable exhaust fan of 300 mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.

S&F MCB 'B' Curve 6-32 Amp SPN ,240 Volts Make Havells Cat Part No. DHMZCSNF006-032 or L&T/Schneider. (Note : MCB shall be fixed in existing DB)

S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts,Make Havells Cat Part No.DHMZCSPF006-032 or L&T/Schneider (Note : MCB shall be fixed in existing DB)

Taking down old GI/ CPVC pipe of size 25 mm complete all as specified and as directed.

Taking down old GI/ CPVC pipe of size 20 mm complete all as specified and as directed.

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 25 mm dia complete all as specified and directed.

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia complete all as specified and directed.

Taking down old bib tap, stop cock,shower ,pillar tap,sink cock,angle valve, health faucet, angle cock health fauset etc complete all as specified and as directed.

Supply and fixing of Bip cock, CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2004151 of Cera or Jaquar/Prayag

Supply and fixing of Bip cock, CP quarter turn with flange and areator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2004152 of Cera or Jaquar/Prayag.

Supply and fix concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directedby the Engineer-in-charge.(Make : Model NO: F2002362 of Cera or Jaquar/Prayag.

Supply and fixing 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F2004201 of Cera or Jaquar/Prayag.)

Taking down old PVC connection complete all as specified and as directed.

Supply and fixing PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed.

Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , including taking out old one all as per specified and directed (Make : Model No: F8030102 of Cera or Jaquar/Prayag

Supply and fixing of swivel overhead shower of PTMT any colour with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one complete and all as specified and as directed by the Engineer -in-Charge. Cat Part No. F7020101 orJaquar/Prayag

M/L for cutting chasses on walls floor etc not exceeding 20 cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed .

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness, above ground level in the foundation complete all as specified and directed

Material and labour for cement concrete in foundations, filling and mass concrete type 1:3:6(40mm graded aggregate) complete all as specified and directed

Taking down old CPVC ball valve of size 40mm/20 mm /25 mm complete all as specified and directed.

M & L for CPVC Ball Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

Supply and Fixing CP angle cock,Self closers Pressmatic with wall flange and 200 mm connecting pipe for urinal pots to fixed in 15/20 mm Pipe,complete all as specified (Make : Cera Model No:F 9020203 or Jaquar/Prayag)

M/s Antony Kallarakkal

K THOMAS AND COMPANY