T-108/EDCP/2020-21

Amount

Opening of conductor and accessories/AB cable from damage pole including removal of ACSR conductor/AB cable from pole after disconnect of consumer connection and LT distribution box.

Digging of pit of damage pole on pakka RCC road with help of cutting machine, dismantling of pole and removing of pole from site for major damage STP 11 Mtr. /PCC 8.5 Mtr. Pole replacement.

Carriage of 05 Nos ST Poles 11 Mtr. long & 25 Nos PCC Pole 8.5 Mtr. long from store center Pilibhit to site including loading unloading at both ends up to distance 35 km. in area of EDD Pilibhit.

Carriage of major damage ST Pole from site to store center Pilibhit including loading unloading at both end up to distance 35 km. in area of EDD Pilibhit.

Erection of single pole, PCC/STP 11 Mtr. of LT/HT line along with all fabrication work fitting of accessories including dragging of pole from dump site to pit site all fitting required shall be used from damage pole (in LT pole reconnect of consumers connection with LT Distribution box).

Re-laying and Re-sagging of ACSR conductor/ AB cable in both side span of erected pole HT/LT.

Digging of pit around the damage pole on pakka road by help of road cutting machine, providing MS angel 50x50x6 mm approx. 1 Mtr. length, four pieces in each pole including fabrication of MS angle, fixing of MS angle in pit, welding of MS angle from lower portion to above portion of ground level with electrodes complete in all respect. (all material required for work provided by contractor)

Fitting of accessories on welded pole and sagging of conductor / AB cable both side span including re connect of consumer connection on LT pole.

Concreting of supports in 1:4:8 ratio and Plinthing of supports up to 300mm above ground level by using cement, brick ballast and sand in ratio 1:4:8 as per RESSPO drawing with watering/curing properly up to proper setting of Plinthing for STP/PCC Pole Grouting. All material would be provided by the contractor.

Painting of welded ST Pole in two coats with synthetic enamle, 1 Mtr. above of constructed Plinth Including cost of material. All material would be provided by the contractor.

Carriage of 11 KV / 33 KV XLPE cable from store to site including digging of trench up to 1.5 Mtr. depth, laying of layer of local sand, laying of cable by providing bricks, top and both side of cable including re filling of trench. (All material provided by contractor accept cable)

Replacement of damage disc insulator of 33/11 KV line including carriage of insulator from JE store to site (disc insulator provided by department.)

Cutting and chopping of tree branches in the way of 33/11 KV line.

Filling of 11 KV cable heat shrinkable type jointing kit/ termination kit suitable 11 KV cables of the following sizes after removal of faults (suitable jointing kit will be provided by the department.)

3x70/ 3x120/3x185 sqm XLPE cable O/D and I/D

3x240/ 300 sqm XLPE cable O/D and I/D

Providing and fixing of 11 KV cable heat shrinkable type jointing kit/ termination of kit suitable for 11 KV cable of following size after removal of faults (Jointing kit will be provided by the contractor in case not available in store.)

3x70/ 3x120/3x185 sqm XLPE cable O/D and I/D

3x240/ 300 sqm XLPE cable O/D and I/D

Filling 33 KV cable heat shrinkable type jointing kit / termination of kit suitable for 33 KV cable of following size after removal of faults (suitable jointing kit will be provided by the department.)

3x300 sqm XLPE cable O/D and I/D

3x120 sqm XLPE cable O/D and I/D

3x120 / 3x300 sqm XLPE cable straight through

Providing and fixing of 33 KV cable heat shrinkable type jointing kit/ termination of kit suitable for 33 KV cable of following size after removal of faults (Jointing kit will be provided by the contractor in case not available in store.)

3x300 sqm XLPE cable O/D and I/D

3x120 sqm XLPE cable O/D and I/D

Bharat Trading Corporation

Vardan Traders