Renovation of canteen for Numaligarh Refinery Marketing Terminal

Amount

Civil Works

Reinforced cement concrete work in beams,suspended floors,roofs,landing,balconies,shelves,chajjas, lintel,bends, window staircases, spiral staircases upto floor five level,excluding the cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (TMT Bar)

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Brick work with common burnt clay Locally available 1st class brick in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay Locally available 1st class brick in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix :1:4 (1 cement: 4 coarse sand)

Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with alkali resistant primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and also including preparing the surface even and sand papered smooth.

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Naturaplast

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for platforms, vanity counters, window sills , facias,wall and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). iii) Of size300mmx600mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) ii) Of size 600mmx600mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)ii) Of size 1200mmx1600mm /1200x1200 and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) ii) Of size 2400mmx1200mm

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).: 12.5mm thick

Providing and fixing of Armstrong Mineral fibre acoustical suspended ceiling system: Providing and fixing Mineral Fiber Acoustic Ceiling Tiles in 600mm x 600mm of 13mm/15mm thickness to be placed in E- Grid Suspended Ceiling Grid 2430 System consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. Main Runner shall be placed along the shorter dimension of the area to be covered. The distance between the two Main Runners to be maintained at 1200mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm.E-Grid of module size 600mm x 600mm shall be supported by 4/6 mm dia G.I. wire from purlins/soffit Mineral Fiber Acoustic Ceiling Tiles of Everest Industries Limited should be placed in the E-Grid module to form a False Ceiling including the cuttings complete as directed. B) Using 15mm thick ceiling tiles

Supplying, fitting and fixing SoundSoak NSS Cord (FSS Cord) wrapped acoustical wall panel system. Including all fixtures and fittings.(anutone or equivalent): 25 mm

Supplying, fitting and fixing acoustical wall panel system Including all fixtures and fittings.d) Wood works acoustical wall panelling comprising of grooved / perforated and as per design and specified by consultant

12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPTI, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade 1, Type - II marked :

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

Extra for additional labour for circular works, such as in frames of fan light etc. Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood: 35 mm thick shutters.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Particle Board 12 mm thick: Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: 5.5 mm thick glass panes.

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, 1mm thick laminte of approved shade on both sides and edges all complete: 40 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all completerequired to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all as per the Architectural drawings, as per item description, asspecified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :For fixed portion-Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness Clear or Decorative

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge .External work 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge .External work 25mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge .External work 50 mm nominal outer dia Pipes

Providing and fixing soil, waste and vent & rain pipes 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and fixing soil, waste and vent & rain pipes 75 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3990

Providing and fixing GI or uPVC inlet fitting with 1 or 2 inlets fabricated from 100 mm dia GI pipes and welded GI sockets or uPVC tees of appropriate size fixed to cPVC trap with and set in cement concrete as per drawing complete.

Providing and fixing stainless steel grating 1 mm thick (with or with out hole) including fixing to the floor with cement mortar. 125 mm dia

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing & fixing chrome plated brass auto closing system pressmatic pillar cock, having foam flow technology. 15 mm nominal bore. (Jaquer product code: PRS-CHR-031)

Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. (ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe

Providing and fixing C.P. brass angle valve approved quality. 15 mm nominal bore.

Providing,Fitting and Fixing Europratik Lucento sheet at ceiling for transparent light cover panelling including with laminated plywood frame as per design including all labour, material, tools, tackles, lead, lift, transportation etc all complete.

Providing ,fixing and fitting cnc cutting of MDF board of 12mm thick at ceiling as per design and details.

Providing ,fixing and fitting of Modified Clay Material(MCM) pasted(by specified adhesive over 12 mm thick water proof ply board as directed by the Authority.

Providing & fixing wall murals made of plyboard with lamintes paste over the Plywood of designed size and shpe on dining hall wall as per design and directed by th including all labour, material, tools, tackles, lead, lift, transportation etc all complete.In built srtip light connctions and fittings to be provided and included.

Providing & fixing decorative laminated hanging box in ceiling of 1mm thick laminted plyboard(12mm thick)1 thick) fixed with clamp from slab at regular intervals as specified / as per design directed by the consultant including all labour, material, tools, tackles, lead, lift, transportation etc all complete.

Providing & fixing decorative panel of 1mm thick laminate of approved shade over 12mm thick plywood fixed with 35x35 mm frame at regular intervals as specified in Drawing with neccesary supports from walls with required internal wooden frames intervals both horizontal & vertical as per design directed by the consultant including all labour, material, tools, tackles, lead, lift, transportation etc all complete.

Providing ,fitting and fixing low ht.cabinet of 750 mm height & width varying from (450x 600)mm made of 19mm plywood frame and shutter including 1mm thick laminate of approved shade and brand with all necessary hardwares,tools and tackles,labors complete as directed by the consultant. Measurement to be done as per length & height.

Providing,Fitting and Fixing Europratik Lucento sheet Box fixed with Plywood framming at ceiling for transparent light cover panelling including with laminated plywood frame as per design including all labour, material, tools, tackles, lead, lift, transportation etc all complete.

Providing ,fixing and fitting Mirror of superior glass with out frame fixed on wall with all aceessories as directed by the authority complete.

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. ( Kohler K-10557 Devonshire towel ring or equivalent

Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified. Kohler K-10712D Cruz soap/lotion dispenser or equivalent

Providing and fixing over Counter Basin white (Make Cera / Coyota size 765 X465 ) with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.

Electrcial works

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc. as required : Group A

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc. as required : Group - B

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc. as required : Group - C

Wiring for twin control light Point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring to 5 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere :Short point up to 3.00 metre. length.

Wiring to 5 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere : Medium point up to 6.00 metre. Length.

Wiring for light /power plug with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit alongwith 1 No. of 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit /submain wiring along with earth wire the following sizes of PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required : 2 X 2.5 Sq. mm + 1X 2.5 Sq.mm earth wire

Wiring for circuit /submain wiring along with earth wire the following sizes of PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required : 2 X 4 Sq. mm + 1X 4 Sq.mm earth wire

Wiring for circuit /submain wiring along with earth wire the following sizes of PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required : 2 X 6 Sq. mm + 1X 6 Sq.mm earth wire

Wiring for circuit /submain wiring along with earth wire the following sizes of PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required : 2 X 10 Sq. mm + 1X 10 Sq.mm earth wire

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess includingf cutting the wall and making good the same in case of reccessed conduit as required. : 20 mm

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess includingf cutting the wall and making good the same in case of reccessed conduit as required. : 25 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amp modular switch, socket, connection, painting etc. as required.

Wiring for plug points for 16amp Power Socket Outlet Point in a circuit as above using 2x4 + 1x4 sqmm 1.1 KV Grade FR, PVC insulated stranded copper conductor wire for phase, neutral and earth, controlled by a Modular Plate Type 16 Amp switch and a 6 pin 16 amp convenient power outlet for power outlets (switch/socket as well as Boards to be provided by the contractor) including 25mm dia PVC conduit along with associated accessories like MS junction boxes, bends, saddles, screws, etc. concealed in wall, floor, under flooring, below false ceiling as well as suspended from ceiling with 25mm x 3mm MS flat suspenders duly painted above false ceiling from individual light point outlet, etc. to individual switch boards in suitable size 16 SWG MS boxes fixed in concealed manner as directed. Medium point up to 6.00 metre.

Supply and laying of PVC insulated and PVC sheathed 1.1 KV grade aluminium conductor LT armoured UG cable of the following sizes complete with fixing to the walls with saddles, cable glands for connecting to the panels and appropriate end termination with copper lugs and providing of 2 nos. of 8 SWG GI wires and clearing the debris upto the satisfaction as speciefied and directed by the deptt. : 3 core 4 sqmm

Supply and laying of PVC insulated and PVC sheathed 1.1 KV grade aluminium conductor LT armoured UG cable of the following sizes complete with fixing to the walls with saddles, cable glands for connecting to the panels and appropriate end termination with copper lugs and providing of 2 nos. of 8 SWG GI wires and clearing the debris upto the satisfaction as speciefied and directed by the deptt. : 3 core 6 sqmm

Supply and laying of PVC insulated and PVC sheathed 1.1 KV grade aluminium conductor LT armoured UG cable of the following sizes complete with fixing to the walls with saddles, cable glands for connecting to the panels and appropriate end termination with copper lugs and providing of 2 nos. of 8 SWG GI wires and clearing the debris upto the satisfaction as speciefied and directed by the deptt. : 3½ core 25 sqmm

Supply and laying of PVC insulated and PVC sheathed 1.1 KV grade aluminium conductor LT armoured UG cable of the following sizes complete with fixing to the walls with saddles, cable glands for connecting to the panels and appropriate end termination with copper lugs and providing of 2 nos. of 8 SWG GI wires and clearing the debris upto the satisfaction as speciefied and directed by the deptt. : 3½ core 70 sqmm

Supply and laying of PVC insulated and PVC sheathed 1.1 KV grade aluminium conductor LT armoured UG cable of the following sizes complete with fixing to the walls with saddles, cable glands for connecting to the panels and appropriate end termination with copper lugs and providing of 2 nos. of 8 SWG GI wires and clearing the debris upto the satisfaction as speciefied and directed by the deptt. : 3½ core 95 sqmm

Supply and laying of PVC insulated and PVC sheathed 1.1 KV grade aluminium conductor LT armoured UG cable of the following sizes complete with fixing to the walls with saddles, cable glands for connecting to the panels and appropriate end termination with copper lugs and providing of 2 nos. of 8 SWG GI wires and clearing the debris upto the satisfaction as speciefied and directed by the deptt. : 3½ core 300 sqmm

Supplying, installation, testing and commissioning of surface/recess mounting, 220/415 volts prewired MCB distribution boards with all switchgears as specified below, of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of 200 amps tinned uniformly rated electrolytic copper bus-bar, common neutral link, earth bar, din bar for mounting MCB/MCCB/RCCBs detachable gland/knock out plates and with built in loose wire box, and superior make terminal connectors for all incoming and outgoings circuits, duly prewired with adequate size of FR PVC insulated copper conductor upto the terminal connector/neutral link and ready for installation as specified below: MCBDB 8 way TPN 7 segment DB for Light Load ; MCBDB 12 way TPN 7 segment DB IP 43 IK 09 with metal Door - 1 No., Incomer 40A 4P MCB - 1 No. Outgoing 40A DP RCCB 100mA/30 mA sensitivity - 3 nos. 6A SP MCB - 24 Nos.

Supplying, installation, testing and commissioning of surface/recess mounting, 220/415 volts prewired MCB distribution boards with all switchgears as specified below, of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of 200 amps tinned uniformly rated electrolytic copper bus-bar, common neutral link, earth bar, din bar for mounting MCB/MCCB/RCCBs detachable gland/knock out plates and with built in loose wire box, and superior make terminal connectors for all incoming and outgoings circuits, duly prewired with adequate size of FR PVC insulated copper conductor upto the terminal connector/neutral link and ready for installation as specified below: MCBDB 8 way VTPN DB for Power Load 8 way VTPN DB IP 43 IK 09 with provision for MCCB as incomer metal Doors - 1 No. Incomer 100 Amp 4P 25 KA MCCB - 1 No. MCCB to be microprocessor based with Ground fault protection (LIG) Outgoing 32A TP 10 KA MCB - 8 Nos.

"Supply, installation, testing and commissioning of Feeder Pillar 125A (Outdoor Type: IP-55) Feeder Pillar should comprise of the following :(The panel shall be out door type with required enclosure and degree of protection IP 55) Feeder Pillar to be stand alone Outdoor type with suitable supports and base frame. INCOMER: 1 no 125A 4Pole TPN MCCB (415 V,50 Hz,36 KA,microprocessor based) with earth leakage , ground fault protection, under voltage, adjustable Over load,adjustable shortcircuit protection at incomer as per relevant standards of make L&T,legrand,Schneider, Havells or equivalent. Digital Multifunctional Meter to be provided in Incomer OUTGOING: 6 nos. feeders each with RCBO 32A/25KA/100 mA as outgoings of make L&T,Schneider,Havells,Legrand or equivalent . OTHERS: 250A TPN Copper busbar. All terminals to be provided with spreaders etc. suitable for cable size upto 3.5C X 120 Sqmm. Panel construction to be of 2 mm thick M.S. sheet metal (powder coated through seven tank process) and with suitable base frame. Cubicle Board as per specifications mentioned elsewhere in the document complete, including earthing bus etc. as required. Outdoor Feeder Pillar as described above complete. "

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm,made of mild steel at least 2 mm thick and vitreous enamelled white on both side and with inscription in single red colour on front side as required.

Supply, installation and testing of Recess mounted circular LED downlighter suitable for retrofit solution of make Wipro Cat No. LD45-006-XXX-WH-XX 1 x 6 W class LED or equivalent. Rate to include cost of lamps. [CL]

Supply, installation and testing of recess mounted LED luminaire for new-age work spaces of make Wipro Cat No. LM14-032-XXX-WH-XX 32 W or equivalent. Rate to include cost of lamps. [DLED]

Supply, installation and testing of Bright & Elegant T5 Battens with High Power factor (PF >.98), Warm start operation, helps in extra long life of make Philips Cat No. ADRENO V2 28W TWG207 HF 1xTL5-28W or equivalent including lamps as required complete [TL].

Supply, installation and testing of Surface mounted LED downlighters for multi-utility applications of make Wipro Cat No. LD51-012-XXX-WH-XX 2 x 6 W class LED or equivalent including lamps as required complete [DL]

Supply installation and testing of Bajaj or equivalent make ceiling fan 1200mm .Cat No:- Model -Bajaj GRACE GOLD DX or equivalent. (F)

Supply, installation and testing of 400 mm sweep Wall/ Cabin Fan including all accessories as required complete of make Bajaj Model -Bajaj Midea BW-04 or equivalent. (WF)

Supply and fixing of Bajaj or equivalent make exhaust fan ( 250mm/10" sweep) in toilets & pantry (BOX TYPE).Cat No:- MAXIMA DX 10" (250mm) with louvers etc. complete as required

Supply, installation and testing of Recess mounted Audio speaker (min 80w) of approved make(JBL or equivalent) with all acessories including audio cable complete as directed by the consultant.

Supply, installation, testing and commissioning of of Recess mounted 1.5 Ton Cassette Type AC of approved make and minimum 4 Star rating with all acessories complete as directed by the EIC.

Supply, installation and testing of Surface mounted LED downlighters make Havells Venus Neo Recess 34W LED or equivalent including lamps as required complete.

Supply, installation and testing of Surface Mounted LED light FZ SQUARE 18W as required complete.

LAKWA CONSTRUCTION AND CO

M/S LIGHT HOUSE

M/s M.A. Enterprise