Annual Rate Contract for Supply, installation, Testing and commissioning of New Fire Fighting System in Various A.M.C. Buildings in Maninagar Ward, South Zone, Ahmedabad

Name of Work : Annual Rate Contract for Supply, Installation,Testing and commissioning of

New Fire Fighting System in Various A.M.C. Buildings in Maninagar Ward, South

Zone, Ahmedabad

Bill of Quantities

SR. No. Qty Items Unit Rate Per

A Part-A - Fire Hydrant System

Supply, Installation, Testing &

Commissioning of Fire Hydrant & Sprinkler

System as per the Technical Specifications &

tender Drawings .The work shall be

Completed in all respect as per the

Instruction of Engineer Incharge.The system

shall be Integrated with BMS (Refer the

Technical Specifications of BMS Specified in

Electrical Tender Document).The Auto Glow

Signage applicable for the respective system

shall be scope of Vendor.The Vendor shall

Prepare and submit 06 Sets of detailed shop

Drawings as per Tender

Specifications/Tender Drawings, Vendor

also shall Submit 06 Sets of As Built

Drawings and 03 Sets of Soft Copy (in the

form of CD in Editable Format alongwith

applicable Test Certificates,Data

Sheets,Operation & Maintenance Manual)

Supplying, Installation, Testing and

Commissioning of electric driven main

1.1 3.00 Hydrant fire pump suitable for automatic 350000.00 SET

operation and consisting of following:

complete in all respect as required.

a) Back pull out ,Horizontal type, single

stage, centrifugal, end suction pump of cast

iron body & bronze impeller with stainless

steel shaft, mechanical seal to ensure a

minimum pressure of 3.5 kg/sq. cm. at

highest and farthest outlet at specified flow

of 137 m3/Hr (2280 lpm )2900 rpm at

Mtr. head conforming to IS 1520.with

suitable size of footvalve confirming to IS

4038, Pressure rating PN2 , preventing entry

of foreign body to pump through suction

pipe, perfectly flat seating surfaces for good

b) Suitable HP Squirrel cage induction

energy efficient motor, TEFC, suitable for

opertion on 415 volts, 3 phase 50 Hz. AC

with IP 55 class protection for enclosure,

horizontal foot mounted type with Class - 'F'

insulation, conforming to IS-325.

c) M.S. fabricated Common base plate,

coupling, coupling guard, foundation bolts

etc. as required.

d) Suitable cement concrete foundation

duly plastered with anti vibration pads.

The pump shall be capable of giving not less

than 150% discharge at ahead not less than

65% of the rated head.

Supplying, installing, testing, &

commissioning of Electric Motor driven

1.2 1.00 Pump suitable for automatic operation 75000.00 SET

consisting of the following ( as per

specification ).- (Terrace Pump)

Back Pull out ,centrifugal end suction type

pump complete for delivery of 900 LPM

against a total head of 30 metres with

bronze impeller complete with Gland

Packing with Complete accessories like Base

Frame,Anti vibration Pads,Coupling etc to

make the system functional in all respect.

Squirrel cage induction , 3 phase ,415 Volt,

50 Hz, Energy Efficient Motor suitable for

above pump. (As per the Specifications of

Motors specified in the Electrical tender

Document) & Supply, Installation, testing &

commissioning of cubical type floor

mounted Electrical panel.The panel shall be

designed as per IS standard & Refer General

Specifications of LT Panels defined in

Electrical Tender Document including the

list approved makes.The Panel shall have

facility to Operate in Auto/Manual Mode of

Terrace Pump. The Pressure Switch ,Flow

switch and control Cabling in between for

the Individual Terrace Pump shall be part of

Vendor's Scope.

Supply, installation, testing, &

commissioning of electric driven automatic

pressurisation pump set consisting of the

Vertical in line ,multistage Jockey pump

complete for delivery of 10.8 m3/hr against

a total head of 70 metres with bronze

impeller complete with Gland Packing with

Complete accessories like Base Frame,Anti

vibration Pads,Coupling etc to make the

system functional in all respect.

Squirrel cage induction , 3 phase ,415 Volt,

50 Hz, Energy Efficient Motor suitable for

above pump. (As per the Specifications of

Motors specified in the Electrical tender

Supplying, Installation, Testing and

Commissioning of diesel engine driven main

1.4 2.00 fire pump suitable for automatic operation 625000.00 SET

and consisting of following: complete in all

respect as required

b) Suitable HP, 1500 /1800 RPM water

cooled with radiator, diesel engine

conforming to relevant BS & IS standard

complete with auto starting mechanism

with Battery,Charging system,Cables, Panel

(As per General Specifications in electrical

Tender), 12/24 volts electric starting

equipment, 180 AH lead acid battery with

battery stand, exhaust pipe extended upto

m. outside pump house duly insulated with

50 mm thick glass wool with 1.0 mm. thick

aluminium sheet cladding, residential

silencer, instruments and protection as per

specification, stop solenoid for auto stop in

the event of fault with audio indications,

painted with post office red colour etc. as

c) One 200 Ltr capacity day oil storage tank

fabricated from 3 mm thick M.S. plates.

Tank shall be provided with inlet, outlet,

overflow, air vent, drain connections, filling

connection & level indicator. Tank shall be

mounted on a suitable steel structure

(Painted with 2 coats of red oxide paint).

Tank shall be provided with two or more

coats of synthetic enamel paint outside over

two coats of red oxide primer.

d) M.S. Fabricated Common base plate,

coupling, coupling guard, foundation bolts

etc. as required.

e) Suitable cement concrete foundation

duly plastered with anti vibration pads.

a) Back pull out,Horizontal type, single

stage, centrifugal, end suction pump

complete for delivery of 137 m3/hr (2280

LPM) 2150 rpm against a total head of

metres of cast iron body and bronze

impeller with stainless steel shaft,

mechanical seal to ensure a minimum

pressure of 3.5 kg/sq. cm at highest and

farthest outlet at specified flow to make the

system functional in all respect.

FIRE CONTROL PANEL FOR Main Hydrant

2.1 1.00 pump,Sprinkler Pump and Jockey pump and 341210.00 No

Diesel Engine pump.

Fabrication, Supplying, Installation, Testing

& Commissioning of electrical control panel

of cubical construction, floor mounted type,

fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable

doors, dust and vermin proof, powder

coated of approved shade after 7 tank

treatement process, cable alley, inter-

connection, having switchgears and

accessories mounting and internal wiring,

earth terminals, numbering etc. complete in

all respect, suitable for main fire pump,

pressurisation pump complete as per

CPWD specification with following in

coming and Outgoings, suitable for

operation on 415V, 3 phase, 50Hz Ac Supply

with enclosure protection class IP 42 as

required :suitable for operation on 415 V,

phase, 50 HZ, AC supply with enclosure

protection class IP 42 as required.

A. Incoming Feeder:-

(i) 1 No of 200 A,35KA, 415V,FP MCCB with

Thermalmagnetic Based Releases having

O/C, S/C ,E/F protection, Digital ELR

96x96mm with CBCT, FP Spreader Terminals

1 set= 8 Pcs, Extended Rotory Handle for

MCCB, 240V AC Shunt Trip coil for MCCB.

(ii) LED type indicating Lamp with suitable

rating 2 Amp SP MCB:- 1 Set (each set

comprise of R,Y,B)

(iii) Digital type 3 phase Multi function

Meter with suitable rating of MCB & 3 Nos.

of single core epoxy resin cast type CTs of

200/5 Amps, 10 VA, CL 1.0 ratings -1 Set.

415 V, 200 Amps, FP Aluminium Busbars

with Heat shrinkable color code insulation

OUTGOINGS:-( All outgoing feeders for

pumps should have digital Ammeter with

selector switches and LED type ON,OFF,Trip

indicating Lamps )

1 sets - 125 A, 25kA TPN MCCB, Ics=100%

Icu, with fully automatic Star/Delta starter

suitable for 50 HP pump with overload

protection, current sensing type single

phase preventor complete with all

acceessories and internal wiring required

for automatic operation,selector switch for

local/remote, auto/manual/OFF operation.

1 sets - 125 A, 25kA TPN MCCB, Ics=100%

Icu, with fully automatic Star/Delta starter

suitable for 50 HP pump with overload

protection, current sensing type single

phase preventor complete with all

acceessories and internal wiring required

for automatic operation,selector switch for

local/remote, auto/manual/OFF operation.

1 no.63A,16KA MCCB Ics=100%,Extended

Rotry handle with TM release having O/C &

S/C protection with 10 HP fully automatic

star/ delta starter , current sensing type,

Single Phase Preventer, ON/OFF Push

Button & LED type Indicating lamps

complete with all accessories and internal

wiring required for automatic operation,

selector switch, for local/remote,

auto/manual operation

Diesel Engine Control.

Control for Diesel Engine comprising:

i) Auto/Manual selector switch & 3 attempt

starting device, timers and relays as

required, push buttons, start/stop in

ii) LED type Indication lamp for High/Low

Lub. Oil pressure, High Water Temp and

Engine ON indication.

iii) Battery charger suitable for 12 V/24 V DC

with boost and trickle selector switch, 0-30

V DC volt meter, 0-20 Amp DC Ammeter.

iv) All standard relays, accessories for

automatic operation of diesel engine, wiring

with 1.5 sq mm PVC insulated copper wire

between various sensors and system

controller / starter, suitable size cable for

battery charging etc. as required.

System Controller

Designing, Supply, Installation, Testing and

Commissioning of system controller to

control operation of Main Electric Fire

Pump, Diesel Pump, Pressurisation Pump,

Terrace Pump in sequence as per

specification consisting of relays, timers,

sensors, annunciation window for fault

indication, control wiring complete as

3 NOS. 25A DP MCB " C " Curve

FIRE CONTROL PANEL FOR Main Hydrant

2.2 1.00 pump and Jockey pump and Diesel Engine 258883.00 No

Fabrication, Supplying, Installation, Testing

& Commissioning of electrical control panel

of cubical construction, floor mounted type,

fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable

doors, dust and vermin proof, powder

coated of approved shade after 7 tank

treatement process, cable alley, inter-

connection, having switchgears and

accessories mounting and internal wiring,

earth terminals, numbering etc. complete in

all respect, suitable for main fire pump,

pressurisation pump complete as per

CPWD specification with following in

coming and Outgoings, suitable for

operation on 415V, 3 phase, 50Hz Ac Supply

with enclosure protection class IP 42 as

required :suitable for operation on 415 V,

phase, 50 HZ, AC supply with enclosure

protection class IP 42 as required.

A. Incoming Feeder:-

(i) 1 No of 125 A,25KA, 415V,FP MCCB with

Thermalmagnetic Based Releases having

O/C, S/C ,E/F protection, Digital ELR

96x96mm with CBCT, FP Spreader Terminals

1 set= 8 Pcs, Extended Rotory Handle for

MCCB, 240V AC Shunt Trip coil for MCCB.

(ii) LED type indicating Lamp with suitable

rating 2 Amp SP MCB:- 1 Set (each set

comprise of R,Y,B)

(iii) Digital type 3 phase Multi function

Meter with suitable rating of MCB & 3 Nos.

of single core epoxy resin cast type CTs of

125/5 Amps, 10 VA, CL 1.0 ratings -1 Set.

415 V, 125 Amps, FP Aluminium Busbars

with Heat shrinkable color code insulation

OUTGOINGS:-( All outgoing feeders for

pumps should have digital Ammeter with

selector switches and LED type ON,OFF,Trip

indicating Lamps )

1 sets - 80 A, 25kA TPN MCCB, Ics=100% Icu,

with fully automatic Star/Delta starter

suitable for 60 HP pump with overload

protection, current sensing type single

phase preventor complete with all

acceessories and internal wiring required

for automatic operation,selector switch for

local/remote, auto/manual/OFF operation.

1 no.40A,10KA MCB Ics=100%,Extended

Rotry handle with TM release having O/C &

S/C protection with 10 HP fully automatic

star/ delta starter , current sensing type,

Single Phase Preventer, ON/OFF Push

Button & LED type Indicating lamps

complete with all accessories and internal

wiring required for automatic operation,

selector switch, for local/remote,

auto/manual operation

Diesel Engine Control.

Control for Diesel Engine comprising:

i) Auto/Manual selector switch & 3 attempt

starting device, timers and relays as

required, push buttons, start/stop in

ii) LED type Indication lamp for High/Low

Lub. Oil pressure, High Water Temp and

Engine ON indication.

iii) Battery charger suitable for 12 V/24 V DC

with boost and trickle selector switch, 0-30

V DC volt meter, 0-20 Amp DC Ammeter.

iv) All standard relays, accessories for

automatic operation of diesel engine, wiring

with 1.5 sq mm PVC insulated copper wire

between various sensors and system

controller / starter, suitable size cable for

battery charging etc. as required.

System Controller

Designing, Supply, Installation, Testing and

Commissioning of system controller to

control operation of Main Electric Fire

Pump, Diesel Pump, Pressurisation Pump,

Terrace Pump in sequence as per

specification consisting of relays, timers,

sensors, annunciation window for fault

indication, control wiring complete as

3 NOS. 25A DP MCB " C " Curve

S.I.T.C of Pressure gauges - Glycerine Filled

SS 304 with all accessories like needle-

valve, Syphon etc. Range 0-16 Kg/cm2 , Dial

- 150 mm, Size - 1/2 " BSP

Supply,Installation, testing & commissioning

of Diaphragm Type Pressure switch, housing

4 1.00 shall be die cast aluminum with SS 316 3500.00 Nos.

moving parts like pressure element and

socket. the range 0 to 10 Kg/cm2..

Supply ,Fabrication,Erection and Painting of

Steel Structure with one coat of Red Oxide

5 20.00 and Two Coat of Synthetic Enamel Paint for 120.00 Kgs

Support complete in all respect with the

Supply ,Installation, testing &

commissioning air vessel of Min 450 mm

dia. (8 mm thick) 1.5 meter long made from

M.S with 25mm-dia spring-loaded air

release valve, safety valve and gunmetal full

way valve. The Vessel shall be Painted with

one Coat of Red Oxide and Two Coats of

Synthetic Enamel Paint . The Vessel shall be

Fixed and Mounted by Vendor including

anchoring etc. Two Numbers Extra Air vents

with Isolation Ball valves to be Provided in

the Piping at the Highest Point.

Providing, laying, testing & commissioning

of 'C' class heavy duty MS Pipe conforming

to IS 1239 i/c fittings like elbows, tees,

flanges, tapers, nuts bolts, gaskets etc., in

ground including excavation and providing

cement concrete blocks as support,

anticorrosive treatment with

coaltar/asphalt tape as per IS

refilling the trench etc. of following sizes

complete as required .( For HYDRANT )

Providing, laying, testing & commissioning

of 'C' class heavy duty MS pipe conforming

to IS 3589/IS 1239 including Welding,

fittings like elbows, tees, flanges,tapers,

8 nuts bolts, gaskets etc. and fixing the pipe

on the wall/ceiling with suitable

clamp/support frame and painting with two

or more coats of synthetic enamel paint of

required shade complete as required :

8.1 10.00 200 NB (6 mm Thickness) 3500.00 Mtrs

Supply, Installation, testing &

commissioning cast iron double flanged

,including mating Flanges,type IS marked

9 sluice valve of the following size complete

with bolts, nuts, washers and inserted

rubber gaskets as required: As defined in

Technical Specification

Supply, Installation, testing &

commissioning ISI marked C.I (SS304 Disc)

Butterfly valve of P.N 1.6 Rating as per

10 Technical Specification ,the mating flange

and additional Pair of Flanges shall be

considered to Fix the distance piece with

Butterfly Valve.

10.1 2.00 200 NB (Gear Operated) 24000.00 Nos.

Supply, Installation, testing &

commissioning of single headed SS 304, ISI

mark oblique pattern hydrant valve with

11 1.00 80mm diameter flanged inlet & 63 mm 7500.00 Nos.

instantaneous type female out let with pvc

cap- chain spring release type lug and

accessories as per IS: 5290- 1983 (Type ‘A’)

Supply,Installation, testing & commissioning

first aid hose reel, full swinging with 30 mtr

long, 25mm dia rubber lined, with ss

12 1.00 shut off nozzle of 6 mm dia. confirming to 8500.00 Nos.

IS: 884, 1969 including 25mm dia pipe

connection from riser to hose reel with

complete accessories.

Supply & Installation of outdoor type hose

cabinet fabricated from 16g M.S sheet with

full front glass door and locking

arrangement suitable to accommodate ,

no of 15 meter long hose pipe and one

13 1.00 branch pipe. It should be painted with one 4500.00 Nos.

coat of primer and two coat of synthetic

enamel paint. Complete in all respect with

Fixing Supports of Steel Members Duly

Painted in same color and Clamping

Supply & Installation of outdoor type hose

cabinet fabricated from weather proof FRP

sheet with full front glass door and locking

arrangement suitable to accommodate ,

no of 15 meter long hose pipe and one

14 1.00 branch pipe. It should be painted with one 5500.00 Nos.

coat of primer and two coat of synthetic

enamel paint. Complete in all respect with

Fixing Supports of Steel Members Duly

Painted in same color and Clamping

Providing ISI marked RRL (IS : 636, type-A)

fire hose pipe 15 meter long and 63 mm dia

with ISI marked (IS : 903) Stainless steel

male and female coupling bound and

rivetted to hose pipes with copper rivets

and copper wire complete as required.

Providing Stainless steel ISI marked 63 mm.

dia. male Instantaneous pattern short

branch pipes with 20 mm dia. Nozzle as per

IS : 903, suitable for 10 Kg/sqcm operating

pressure and suitable for interconnections

to hose pipe coupling as required.

Supplying and fixing of fire brigade

connection of cast iron body with gun metal

male instantaneous inlet couplings

complete with cap and chain as reqd. for

suitable dia MS pipe connection conforming

17.1 1.00 2 way - 100 mm dia M.S. Pipe 6500.00 Nos.

17.2 1.00 4 way - 150 mm dia M.S. Pipe 12500.00 Nos.

Supply,installation ,testing & commissioning

of Ball Valves 3 Piece Design ,Body - Forged

18 or Cast Carbon Steel ,Trim and Ball SS410

Seat SS410 Threaded End as per Technical

Providing and fixing Orifice plates, S.S.

12 mm thick, bore and construction as per

TAC's Sprinklers manual / IS:15105, for all

horizontal tapping for hydrant system for

reduction of pressure in the range of 3.5-

7.00 Kg/cm2 including one pair of Slip-on-

Flange, nuts, bolts, gasket and complete as

Supply,Installation, testing & commissioning

ISI marked C.I double flanged dual plate

20 type Non- Return valves (SS 304 disc)

Complete with Mating Flanges,Nuts,Bolts

and Gaskets, As per Technical Specification

Supply, installation, testing and

commissioning of "Y" type Flanged Strainer

with SS 410 mesh of at least 10 times pipe

area with flanged inlet and outlet complete

Complete with Mating Flanges,Nuts,Bolts

and Gaskets, As per Technical Specification.

Wrapping and Coating of Under Ground

22 1.00 Piping with 4 MM Pypkot anti Corosive tape 550.00 SQMTR

, As per Technical Specification

Supplying and erecting Flexible PVC

insulated multistrand multicore 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed.

10.00 f) 1.50 Sq.mm 4 core round PVC sheathed 67.00 Mtrs

SITC of fire pump start stop push buttons in

SITC of 2 Zone standalone Fire Alarm

control Panel, 16X2 Character LCD

Display, provision for zone wise contact and

25 1.00 sounder. Panel does not have provision to 7500.00 Nos.

connect Repeater Panel. Make: Ravel

Approval: CE Mark. (Including Five year

free maintenance with guarantee)

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

26 erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in

approved manner as directed

Supply, Installation, Testing and

Commissioning of Single action Manual Pull

Station.Shock and Vibration Resistant, pull

Down Lever Remains Down Until Reset.

27 1.00 Shall be Polarity Insensitive (with all 350.00 Nos.

mounting accessories , complete with

Junction Box for mooting on Surface, Cable

lugs at Ends, cable compression glands,

cable tags and ferruling.

Supply, Installation, Testing and

Commissioning of Conventional Sounder

cum strobe having tone settings with range

of 95dbA and field selectable 15/30/75/110

28 1.00 candelas.(with all mounting accessories , 950.00 No

complete with Junction Box for mooting on

surface, cable lugs at ends, cable

compression glands, cable tags and

29 5.00 S.I.T.C of Conventional Smoke detectors 1350.00 Nos.

30 5.00 S.I.T.C of of Conventional Heat detectors 1550.00 Nos.

S.I.T.C of of Fire retadent Paint 2 Hour

Sprinkler K-5.6, 57 Deg.C, Standard

Response, Standard Coverage. Maximum

Working Pressure: 175 psi (12 bar),Thread

size: 1/2” (15 mm) NPT,Sprinkler Body:

Brass Casting,Body Cap: Stainless

Steel,Deflector: Copper,Deflector Pins:

Stainless Steel,Compression Screw:

32 Brass,Fusible Link Assembly: Beryllium

Nickel and Eutectic Solder,Fusible Link

Levers: Stainless Steel,Lever Bar: Copper

Alloy,Belleville Spring Sealing Assembly:

Nickel Alloy, coated on both sides with

Teflon Tape and Escutcheon Plate: Brass &

Sprinkler Finish- Chrome Finished.Sprinkler

Heads Shall be UL Listed Approved

32.1 1.00 Upright Type Sprinkler Heads 450.00 Nos.

32.2 1.00 Pendent Type Sprinkler Heads 450.00 Nos.

32.3 1.00 Side Wall Sprinkler 550.00 Nos.

32.4 1.00 Side Wall Extended Throw Sprinkler 650.00 Nos.

S.I.T.C of Air release valve with Body Brass,

33 Internal Parts & Float HDPE complete with

all accessories.

1.00 25MM Size 2500.00 Nos.

S.I.T.C of Flexible Dropper Unit - Complete

with Braided SS Hose, Support Bracket,

Inlet/Outlet Connectors and Square Bar -

Mild Steel, zinc plated, Nipples, Reducer and

other accessories. Size - 1 X 1/2" or 3/4"

with 750 / 1000mm / 1500mm length

34.1 1.00 750mm length 1000.00 Nos.

34.2 1.00 1000mm length 1400.00 Nos.

34.3 1.00 1500mm length 1800.00 Nos.

S.I.T.C of Inspector's Test Connection with

Orifice and Isolation Gun Metal Ball valves

with screwed ends lever operated ASTM A

35 1.00 105,TRIM 13% Cr. 800# Including 25NB dia. 7500.00 Nos.

pipes, fittings, Open Sprinkler, Coupling,

pressure gauge, Sight glass & Wall mounted

MS Box for better operations.

Supply Installation testing & Commissioning

of Flow switch for the maximum working

temperature of 250°C with flameproof

protection. Sensing Element of SS 316. The

Flow switch shall hooked up with the Fire

Alarm system the Provision is the part of

Vendor's Scope. The Flow Switch shall be UL

Listed/FM Approved.

Supply, Installation, testing and

Commissioning of Sprinkler Alarm Valve

with Trim and Water Motor Gong Bell,

Working press 175 PSI, Hydraulic Testing

Pressure 350 PSI, Body High Tensile C.I.

Seat Ring & Clapper - Bronze, Cover Bolts

Steel,Clapper Disc -EPDM & other

accessories as UL Listed/FM approved

Specification. The Mechanical Gong

Diameter 205 MM, UL Listed/FM Approved.

S.I.T.C of 2 core x 1 sq. mm flexible wire

38 1.00 with pvc conduit & accessories for alarm 70.00 Mtrs

Centrifugal,Electrical Operated,Vertical,

Mono Block, Motor above & Pump

Below,Dewatering Pump for Pump Room

Complete with Electrical Panel,Level control

& Cable etc. For auto operation, Capacity -

270 LPM, Head -15 Meters, The Pump shall

be suitable to Pump Dust,Dirt and

39 4.00 Suspended solids of same nature, Complete 45000.00 SET

with Aluminium Body,SS 304 Impeller,SS

Fasteners,SS 410 Shaft. The Power supply

shall be 3 Phase,415 Volt and the Cable in

between from Panel to Pump shall be

vendor's scope. Refer the Secifications &

Approved makes of General Specification of

Electrical Tender.

Obtaining approval on entire Fire Protection

and detection system from Local Fire

Brigade authority / Insurance co. or from

any other statutory body with all respect

the Statutory Approval Charges paid to the

40 1.00 Statutory authorities will be re imburshed 100000.00 Lot

by HAL on reciept of written approval from

Statutory authority and against submission

of Payment reciepts from Statutory

Authorities.(Legal Fess shall be paid Be

Providing, fixing, testing and commissioning

of below Auto Glow Signages.

41.2 2.00 Fire Equipment: 4" X 12" 514.97 Nos.

In case of Fire, do not use lift, use staircase:

41.4 2.00 Fire Lift 4"X12" 514.97 Nos.

41.5 2.00 Fire Extinguishers 8"x 4" 480.00 Nos.

41.6 2.00 Floor Sign": 4" X 12" 514.97 Nos.

41.7 2.00 Fire Hydrant 4” X 12” 514.97 Nos.

41.8 2.00 Fire Hose Reel.4” X 12” 514.97 Nos.

41.9 2.00 DCP Extinguisher 8"x 4" 480.00 Nos.

41.1 2.00 CO2 Extinguisher 8"X 4" 480.00 Nos.

SUB-TOTAL OF PART-A FIRE HYDRANT

PART-B FIRE EXTINGUISERS AND

LIGHTNING ARRESTOR

Supply & Installation of 6 Kg ABC

Extinguisher of stored pressure type with

mono ammonium phosphate discharge

tube and pressure gauge complete.

Tenderer shall give 3 years guarantee on

cylinder with gas and powder. Quantity &

Quality shall be as Latest Code -15683/BIS

Supply & Installation of CO2 Fire

Extinguisher of 4.5 Kg capacity fitted with

screw down type high pressure control

valve with 1.0 M long rubber braided

discharge hose with horn. The Body shall be

CCE approved with IS:2878 marking and

supplied with initial charge of CO2 gas. The

valve shall conform to IS:3224.Quantity &

Quality shall be as Latest Code -15683/BIS

Supply & Installation of 2 Kg ABC

Extinguisher of stored pressure type with

mono ammonium phosphate discharge

tube and pressure gauge complete.

Tenderer shall give 5 years guarantee on

cylinder with gas and powder.Quantity &

Quality shall be as Latest Code -15683/BIS

SITC of Vertical Air Termination Solid

aluminium with Base- 10 mm dia and

mm long. Air Termination Base tested for

conditioning, Ageing Test & Lightning

45 6.00 impulse current withstand test: 100 kA of 9323.00 No

10/350µs waveform in an accredited Third

party laboratory as per 6.3 & 6.4 of IEC

62561-1 2017 protocol with MAST 34mm

dia 3000 mm long- Cold Galvanized

SITC of 8 mm dia solid Aluminium

Conductor for roof top mesh grid and

tested as per IEC 62561- 2 conducted in the

Govt. accredited thirty party laboratory to

meet the requirement of IS/IEC 62305 with

Required Accessories - Aluminium Holding

clamp at every 1 mtr distance,

Aluminium/SS cross splicer at every crossing

of Alu. conductor, Expansion piece with

connectors at every 20 mtr distance,

Aluminium straight Splicer to connect

conductors. All Accessories should be

tested as per IEC 62561-1 2018 Cl. 6.3 for

conditioning & Ageing Test & 6.4 for

Lightning impulse current withstand test:

100 kA of 10/350µs waveform(Ageing &

Electrical test ) conducted in a sequence

manner & tested in the Govt. accredited

Third party laboratory to meet the

requirements of IS/IEC

SITC of Galvanized Steel Flat 25x6 mm

thickness from earth electrode directly in

47 2.00 ground as required. Zinc coating: 500 g/m 153.00 Mtr

square (Approx:70 micron coating) tested

and used exclusively for lightning protection

earthing system and ring equipotential

SITC of 14.2 mm dia 3 mtr long Earth

electrode of High tensile steel electrode

with 250 micron copper bonding & 1 bag of

Carbon fill Based environment friendly

backfill tested as per IEC 62561-7 in NABL

48 2.00 accredited Laboratory and suitable stainless 6250.00 No

Steel double sided clamp. Eco Friendly rust

proof heavy duty weather proof

Polyethylene Earth Pit Chamber with

following dimensions :254 mm dia (top),

330 mm dia (bottom) & 260 mm (height).

SUB-TOTAL OF PART-B FIRE EXTINGUISERS

AND LIGHTNING ARRESTOR

PART-C ELECTRICAL

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with

49 Fixed thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing.

3.00 ICS=100% of ICU only 8773.60 Nos.

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with

Microprocessr release having Overcurrent

Range 40-160A suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing

1.00 ICS=100% of ICU only 23288.45 Nos.

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above

at 415 V . having normal current rating

250A. with Microprocessr release having

overcurrent range 100-250A suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

2.00 ICS=100% of ICU only 30071.55 Nos.

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 50 KA and above

at 415 V having Normal current rating

400A. with Microprocessor release having

overcurrent range 100-400A suitable to

work on A.C.supply 50 c/s. With all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

1.00 ICS=100% of ICU only 36219.55 Nos.

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 50 K.A. and above

at 415 V having normal current rating up to

630A. with Microprocessor release suitable

to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing . Overload release range

158-630A. confirms to IS/IEC 60947-2.

1.00 ICS=100% of ICU only 40447.75 Nos.

Providing and erecting Approved make

Earth fault Relay suitable to mount with

inter connection suitable to following size

of moulded case circuit breaker having CT

ratio & MCCB rating as following along with

shunt trip 220V AC. with all internal

connections & complete erected in existing

FABRICATION AND BUSBARS CHAMBER

Providing and erecting busbar chamber

confirming to IS-375 fabricated from

G.M.S. sheet, dust & vermin proof having

hinged door with rubber gasket and

necessary busbar supports with COPPER

busbar having current density not more

than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with

colour insulation tape for phase sequence,

three phase & neutral each suitable for

following current capacity with necessary

painting mounted on wall or pedestal frame

of required size with necessary

55.1 1.00 (B) Suitable for 200 Amp. Capacity 5675.00 Rn.Mtr

55.2 1.00 (C) Suitable for 300 Amp. capacity 8455.00 Rn.Mtr

55.3 1.00 (D) Suitable for 400 Amp. capacity 10239.00 Rn.Mtr

Supplying and erecting triple pole & neutral

440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte

bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour

insulating tape for phase sequence of

following current carrying capacity, erected

with necessary bus bar supports /insulators,

main cable socket to each bar, erected in

existing cubical panel with necessary

1.00 (E) Suitable for 630 Amp. capacity 10455.00 Rnmtr

Providing & erecting weather proof, dust &

vermin proof, floor mounted front operated

indoor type cubical panel board necessary

IP-42 and above protection as per approval

from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body &

57 doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

, supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of

supplied switch gears, BUSBARS, suitable

size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with

locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder

(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.

(B) The standard companies switch gear

shall be used and only manufacturers at

CPRI approved factory

1.00 (i) with 350mm depth 14755.00 Sqmtr

CABLE AND TERMINATIONS

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

58 conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench

/ pipe of following size of cables

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm

Providing and, fixing heavy duty flange type

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete with out going tails,

insulating tape etc for following size of

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

61 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required.

61.1 5.00 (h) One wire 25.00 sq. mm 234.00 Mtr

61.2 5.00 (i) One wire 35.00 sq. mm 298.00 Mtr

61.3 5.00 (j) One wire 50.00 sq. mm 466.00 Mtr

61.4 5.00 (k) One wire 70.00 sq. mm 663.00 Mtr

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench

/ pipe at road crossing or floor of following

62.1 5.00 (C) 3 core 6 Sq. mm 392.00 Mtr

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

63 insulated armoured cable complete with

out going tails, insulating tape etc for

following size of cables.

63.1 1.00 (B) 2 to 4 core 6 Sq. mm 38.00 Nos.

63.2 1.00 (C) 2 to 4 core 10 Sq. mm 38.00 Nos.

63.3 1.00 (D) 2 to 4 core 16 Sq. mm 47.00 Nos.

Solder less crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

SUB-TOTAL OF PART-C ELECTRICAL

Signature of contractor Additional City Engineer (SOUTH ZONE)

Seal Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT- SOUTH ZONE

NAME OF WORK:-Annual Rate Contract for Supply, Installation,Testing and commissioning of

New Fire Fighting System in Various A.M.C. Buildings in Maninagar Ward, South Zone,

FINANCIAL BID ( To Be Submitted Online Only )

Sr. No. Description Amount

1 Amount For SITC of Fire Fighting Work Rs.49,10,738.59

Total Rs.49,10,738.59

I/We am/are willing to carry out work at ______ % Above / Below (should be written in figures

and words) The Estimated Cost Mentioned Above.

Estimated cost put to tender:Rs.49,10,738.59 Estimated cost put to tender:Rs.49,10,738.59

Add_____% above : Rs ___________ Deduct_____% below : Rs __________

In words : Rupees _______________________ In words : Rupees_____________________

Signature of contractor Additional City Engineer (SOUTH ZONE)

Seal Ahmedabad Municipal Corporation