REPAIR TO APPROACH PATH AND HARDSTANDING AT CERTAIN LOCATIONS NEAR MARRIED ACCOMMODATION IN MANOJ PANDEY AND YOGENDRA VIHAR AREA AND CERTAIN REPAIR TO PATH CHEQUERED TILING AND ROAD FURNITURE AT CERTAIN LOCATIONS IN NORTH ZONE UNDER GE NORTH BINNAGUR

Amount

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness and any description (below or above ground level) complete all as specified and as directed.

M&L PCC (1:3:6) type C2 using 40mm graded stone aggregate 75 mm thick in plinth protection/footpath laid in panel and finished even and smooth without using extra cement including necessary form work complete all as specified and as directed. Note : Joints of 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of Bitumen and sand 1:3 by weight.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for PCC 1:2:4 type B-I, (using 20 mm graded stone aggregate) as in coping /benching to sides of foot path finished fair and even etc complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 using 20mm graded aggregate in cills, steps, seismic and other similr bands, plinth course, string course, lacing course, parapets and railing upto 60cm height, coping, kneelers, apex stone, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for 25mm thick pre-polished and chemically treated smooth finish exterior grade coloured chequered tile as in path over 20mm thick cement screed bed using cement mortar (1:6) laid complete all as specified and as directed.

M&L for 300mm x 300mm/200 x 200mm & 10 mm thick anti skid pavement tile Endura vitrified tile of "H & R Johnson India" or equivalent in pavit or NITCO as approved by the GE in approved color & Shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20mm thick cement screed bed using cement mortar (1:6) laid complete all as specified and as directed. Note: Design/ Pattern shall be as approved by GE at the time of execution.

Demolition of brick work built in cement mortar etc complete all as specified and as directed.

M&L for Brickwork built in CM 1:4 old size fly ash bricks straight or curved on plan exc 6m mean radius complete all as specified and as directed.

All as per item No 09 above but except bricks complete all as specified and as directed. Note: The serviceable bricks obtained from demolition shall be reused.

M&L for brickwork built in CM 1:4 with old size fly ash bricks straight or curved on plan exc 6m mean radius in half brick walls complete all as specified and as directed.

M&L precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab of drain, man holes/septic tank etc, set in CM 1:4 including demolition complete all as specified and as directed.

M&L for TMT bars 8mm to10mm dia, cut to length, bent to shape required in stirrups spacers and binders and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 S or Fe-410-O complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:4) complete all as specified and as directed.

M&L for 450 mm dia reinforced cement concrete pipes, class NP3, laid and jointed complete with collars including taking down old existing pipe complete all as specified and as directed. Note: The cost towards necessary earth work shall be included in the unit rate quoted.

M&L for plain cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) in water tank platforms, filling and mass concrete including demolition complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern by GE/Engr-in-Charge as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern as approved by GE/Engr-in-Charge over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete of size 300 (L)x100 (T)x300(H)mm in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C2 1:3:6 with using 40mm graded stone aggregate as in sub base to receive a surface complete all as specified and as directed.

M&L for two coats of synthetic enamel (ordinary tint) of approved colours (Yellow. White. Black. Red etc) over priming paints/plaster coat on new kerb stone/concrete etc surfaces of any description over 10cm girth or width, not otherwise described including preparation complete all as specified and as directed.

M&L for preparation of old painted surfaces and applying two coats of synthetic enamel (ordinary tint) of approved colours (Yellow, White, Black, Red etc) on kerb stone/concrete etc surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and as directed.

S&F in repairs solar cat eye aluminum alloy (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-end rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed all as per manufactures instructions etc complete all as specified and as directed.

S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 or equivalent as approved by the GE fixed with and including MS stud of suitable size as per manufacturers instructions complete all as specified and as directed.

S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 and necessary earth work complete all as specified and as directed.

S&F in repairs for stainless steel (Grade 304) railing/tubular posts made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the tubes with high intensity reflective sign board etc including necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab etc with suitable arrangement complete as per direction and approval of GE and all as specified and as directed.

Supply only high intensity reflective sign board made of hardened ACP sheet of min 3mm thick POP riveted to stainless steel tubes. Sign board should be reflective with wide HP sheet and overlay film of blue colour with computer cut letters, sign and border complete all as specified and as directed.

M&L for three coats of white wash on newly pastered surfaces including prepartion of surfaces complete all as specified and as directed

N K Construction

L. B. SHARMA