GE/KHU-55/2024-25 - REPAIR/MAINT OF B/R SERVICES IN DIV HQ UNDER GE KHUMBATHANG

Amount

Demolition of PCC as in block walling built in cement mortar complete all as specified and directed by Engr-in-Charege.

M&L Pre-cast PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) solid block masonry exc 10cm in width or girth and setting cement mortar (1:6) complete all as specified and directed by Engr-in-Charege.

Taking down cement plaster on brick or concrete wall etc including racking out joints hocking for key scrubbing down with water etc. complete all as specified and directed by Engr-in-Charege.

M&L for rendering 10mm thick plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed by Engr-in-Charege.

M&L for rendering 15mm thick plaster in cement mortar (1:4) on other then fair faces of brick work or concrete surfaces including finishing even & fair without using extra cement complete all as specified and directed by Engr-in-Charege.

Preparation of new plastered surface and applying two coat of Cement Base paint on wall complete all as specified and directed by Engr-in-Charege.

Preparation of newly plastered surfaces and applying two coats of oil bound distemper on surfaces of walls over 1 mm thick wall care putty including preparation of surfaces complete all as specified and as directed by Engineer-In-Charge.

Demolition of cement concrete (unreinforced) in ground floor any type and any position and paving including PCC tiles any type n exc (below or above GL) complete all as specified and directed by Engr-in-Charege.

M&L for 75mm thick, cement concrete, type C-2, 1:3:6 (20 mm graded crushed stone aggregate) as in floors & pavings, plinth protection, path, etc. finishing top surface even and Smooth with using extra cement complete all as specified and directed by Engr-in-Charege.

M&L for 100 mm PCC cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-Charege.

M&L PCC (1:3:6) type C-2 using 40mm aggregate as use in surface channel & drain including necessary form work complete all as specified and directed by Engr-in-Charege.

M&L for extra for forming finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed by Engr-in-Charege.

M&L for dismantling of floor hearth or wall tiles including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premisess complete all as specified and directed by Engr-in-Charege.

M&L for 25 mm PCC cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) in floor as PCC padding for tiling etc. complete all as specified and directed by Engr-in-Charege.

M&L for non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm (coloured tiles) in floor, set & jointed in neat cement slurry, pointed,in white or coloured cement to match, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charege.

M&L for glazed ceramic tiles coloured (350 x 250 x 7/450x350/300x450x7 to 8mm thick) on walls, set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick on fair faces with cement mortar (1:4) complete all as specified and directed by Engr-in-Charege.

M&L for Virified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charege.

Demolition of Stone slabs and tiles of any description or thickness in floors or walls, aprons etc. complete all as specified and directed by Engr-in-Charege.

M&L for18 to 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like over and including in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed by Engr-in-Charege.

M&L for chequered cement concrete tiles 300x 300x 20mm thick set and jointed in neat cement surry & pointed with grey cement and pigment to match. over and included 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charege.

M&L for wooden floor tiles of size 1200 x 200 mm and 7 mm thick with dove tailed joints laid over 150 Micron polythene film and 3mm thick foam as per manufacturers instructions including taking down of old wooden flooring any type and fixed with decorative wooden beadings as per site requirement complete all as specified and directed by Engr-in-Charege.

Dismantling wall and ceilling boards of any description including cover fillets complete all as specified and directed by Engr-in-Charege.

M & L 9 mm thick Prelaminated Partical Board interior grade prelamination one side & other side balancing white lamination fixed with nails to timber frame work as in ceiling complete all as specified and directed by Engr-in-Charege.

M & L 11 to12 mm thick Prelaminated Partical Board interior grade prelamination one side & other side balancing white lamination fixed with nails to timber frame work as in wall complete all as specified and directed by Engr-in-Charege.

Dismantling timber scantling 40 sqcm and over in section unframed work in any position complete all as specified and directed by Engr-in-Charege.

M&L 2nd class HW in scantling clean sawn timber fixed with nails complete all as specified and directed by Engr-in-Charege.

Dismantling timber fillets, rails, posts rafter purlins under 40 Sqcm in sectional area complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 2nd class HW plain fillets Square rectangular/triangular in section clean sawn secured with nails sec area exc 13 & n.exc 25 sqcm complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 2nd class HW plain fillets square rectanular, triangular in section wrought with nails sectional area exc. 6 and n.exc 13 sqcm complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 2nd cl HW plain fillets square rectangular, triangular in section wrought with nails sectional area exc. 3 and n.exc 6 sqcm complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 2nd cl HW plain fillets square rectangular, triangular in section wrought with nails sectional area n'exc. 3 Sqcm as in beadings complete all as specified and directed by Engr-in-Charege.

Hacking out old broken glass (any thickness size quality or description) from wooden pane glazed with putty or fixed with wooden bends complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 4mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 5mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares exc. 0.50 sqm in each pane complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repair galvanised MS wire mesh 0.56mm nominal dia of wire and average width of appearature 1.18mm fixed with finned tack or galvanised wire staples complete all as specified and directed by Engr-in-Charege.

Dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 0.50 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L and J type or cranked hook bolt/self tapping screw as required as in roofs, walls etc with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 0.50 mm thick Plain, galvanised, mild steel sheeting,in ridges,hips,valley guters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charege.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charege.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall/ridges, fixed with self tapping screws complete all as specified and directed by Engr-in-Charege.

Taking down shutter of any description exc 1 sqm but n.exc 2sqm each and refixing in the same opening complete all as specified and directed by Engr-in-Charege.

Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamferred put together with glue pinned at joints complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 2nd class HW glazed & skeleton gauge shutters open rebated & prepared to receive glass divided into squares with plain chamferred or rounded mitred or rebated 35 mm thick complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 35mm thick 2nd class HW plain framed panelled shutters (any numbers of panel) with panels of 12mm thick particle board (PF bonded BWP type) with commercial veneered facing on both sides and fitted to chowkhats or frames complete all as specified and directed by Engr-in-Charege.

Supply and fixing of powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charege.

Supply and fixing of powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, mortice lock-01 Nos door stopper-01 Nos,250 to 300mm long aluminium sliding door bolt-01 Nos ,handles 2 Nos and aluminium tower bolt 150mm long-02 Nos in each door, hinges, anodised aluminum snap beading screws etccomplete all as specified and directed by Engr-in-Charege.

Preparation new or previously untreated wood surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charege.

Supply and fixing of door closer (cast iron) hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repairs door closer (cast iron) hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 100mm size butt hinges cold rolled medium weight complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repairs 100mm size butt hinges cold rolled medium weight complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 200mm size MS barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repairs 200mm size MS barrel tower bolt stove enamelled black with bright boltcomplete all as specified and directed by Engr-in-Charege.

Supply and fixing of 150mm size MS pressed handle oval type stove enameled block complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 150mm size MS pressed handle oval type stove enameled block complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repair 125mm size MS pressed handle oval type stove enameled block complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 300mm long MS sliding bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and including a min of siz bolt & nuts four on bolt & two on staple complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repair 300mm long MS sliding bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and including a min of siz bolt & nuts four on bolt & two on staple complete all as specified and directed by Engr-in-Charege.

Supply and fixing MS flat Iron as small article fixed to chowkhats as in hold fast complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repair 25 mm dia stainless steel curtain rods including fancy type end cap/ brackets,stops, latest design etc and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair Floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charege.

Supply and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc including welding,grinding,buffing,polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolts etc of required size,on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engr-in-Charege.

Supply and fixing Solar control film 25 micron reflective type sticked to glass panes complete all as specified and directed by Engr-in-Charege.

Dismantling water tanks of capacity 250 ltrs to 500 ltrs and removing to store complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top including all fittings and 15mm ball valve) hoisted & fixed in position complete all as specified and directed by Engr-in-Charege.

Dismantling water tanks of capacity 500 ltrs to 1000 ltrs and removing to store complete all as specified and directed by Engr-in-Charege.

Supply and fixing of 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top including all fittings and 20mm ball valve) hoisted & fixed in position complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repair 20mm dia ball PTMT valves high pressure with polythene float valve & fly nut screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repair vitreous china squatting pan "ORISSA" pattern size 580 x 440mm white ('P' trap 110 mm dia) with integral foot rests complete including provn of lime concret beding and making good for floor complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repair PVC low level flushing cistern 9/10 ltrs capacity with float ball valve and bracket including fixing of flush pipe (dia 32 mm) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white (including PVC SWR P Trap of 110 mmsize, fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repair plastic water closet seat, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charege.

Supply and fixing in repair vitreous china wash basin white, flat back, size 550 X 400 mm excluding taps, waste, chain and plug but including 32mm waste coupling of PTMT 32mm-45 gm/ 40mm-60 gm, brackets, cutting for and pinning in as required complete all as specified and directed by Engr-in-Charege.

Supply & Fixing in repair wash basin outlet waste pipe 32mm dia corrugated type expandable type complete all as specified and directed by Engr-in-Charege.

Supply & Fixing in repairs Vitreous China wash down water closet pan (Single piece suit),of size 630x370x690mm white complete all as specified and directed.

Supply and fixing in repair 15mm fancy type pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair fancy type Pillar taps, 15mm Bore dia of pipe, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair 15mm dia PVC connection pipe 450mm ling with two nos fly PTMT nuts etc complete all as specified and directed by Engr-in-Charge.

Taking down GI/PP-R tubing 15/16mm dia and connection including removable to store complete all as specified and directed by Engr-in-Charge.

Taking down GI/PP-R tubing 20mm dia and connection including removable to store complete all as specified and directed by Engr-in-Charge.

Supply and fixing of GI tubing 15mm dia medium grade with all fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing of GI tubing 20mm dia medium grade with all fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 16mm outer dia, 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 20mm outer dia, 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm 125gms) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 15mm fancy type bore Bib tap CP, brass cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 15mm bore Stop valve/angle valves CP cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fixingin repairs fancy type chromium plated cast copper alloy stop valve 20mm dia complete all as specified and directed by Engr-in-Charege.

Deduct Credit for Demolished/Dismantled material Rs (-) 39,084.00 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S TRADE LINK (BID ID -3116748)

M/S M/S MOHD AMIN MUNTAZIR (BID ID -3099695)

KASHMIR FAIR DEAL SERVICES (BID ID -3101479)

M/S Ghulam Mustafa (BID ID -3113557)

M/S MOHD HUSSAIN (BID ID -3101726)