REPAIR TO CERTAIN ROADS/HARDSTANDING ETC AT ARMY AREA SHIKARGARH UNDER GE ARMY NO 2 JODHPUR

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 sqm each and exc 50 mm deep but not exc 100 mm deep incl removing the unserviceable materials / debris outside the premises not exceeding 50 meter away and disposal of the same all as specified and as directed by Engineer-in-charge

Preparing Scarified road surfaces and / or unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat of paving bitumen VG 30 Grade @ 10 Kg per 10 Sqm mannually or with mechanical sprayer all as reqd at site and as directed by Engineer-in-charge.

Material & Labour for premix bituminous macadam using 4 % binder (paving bitumen VG 30 Grade) by weight of total mix laid manually or with mechanical pavers (consolidated thickness 75mm or less), rolled and compacted to gradient and camber required with 8 to 10 tonne power road roller all as specified and directed by Eingneer-in-Charge. (Tack coat as applicable shall be measured and paid under Serial item 2 here-in-before including preparation and cleaning of surfaces.)

Material & Labour for repair to pot holes any depth n. exc 4.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road , cutting around edges to at least 25mm in depth, making good by applying tack coat using paving bitumen VG-30 grade @ 5 kg per 10 Sqm, putting in premix asphaltic semi-dense concrete as specified for thin premixed carpet (30mm thick) in serial item No 5 here-in –after & filled up to the top level of existing road , well rammed (including supply of materials) and compacted with vibromax power roller , depth of pot holes not exc 40 mm (averaging 30mm thick). Note:- Pot holes shall be marked by Engineer-in-Charge before commencement of work and the same shall be entered in MB after making good and before laying of bituminous premixed carpet.

Preparing black topped surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat of paving bitumen VG 30 Grade @ 5Kg per 10 Sqm with mechanical sprayer and laying bituminous premixed asphaltic semi-dense concrete (consolidated thickness) 30mm thick with 5.5% binder content (paving bitumen VG 30 Grade) by weight of total mix, mixed in central computrized hot mix plant and laid using mechanical self propelled paver and rolled with 8 to 12 tonne vibromax power roller to required camber and gradient all as specified and directed by the Engineer-in-Charge.

Making strip, straight line, zebra crossing and stop line not less than 2.5mm thick with hot applied thermoplastic road marking paint of brand Asian (Apcomark) / Berger (Sigmark) (white or yellow) by using automatic mechanical road painting machine all as specified. Note:- Glass beads shall be "Potters" of England/ UAE/ Austria/ Astralia but Not Chinese.

Solar Studs 125 x 125 x 25mm (Model DA 110-DHRUV or Equivalent) Made from Aluminum Alloy. Solar powered by nionocrystal solar panel with high capacity Ni-Cad Battery and 06 pieces LEDs -010mm (03 pieces on both sides) View distance approximately 1000 meters, backup 12 hours of continuous lighting at night incl mild steel pin 12 cm long/ epoxy adhessive as per manufacturers instructions for fixing on road all as specified and as directed by Engineer in Charge complete incl taking out old unserviceable Solar studs/ cat eye any size & and removing the same from site complete. Make:- Safezone / Darkeye/ Greelight.

ABS road colour Cat eyes having dual directions reflective panels (Both sides) of size 100 x 100 x 18-20mm with ABS body filled & fixed with epoxy adhessive as per manufacturer and / or fixing with 12 cm long mild steel pin on road complete with PMMA lens with load capacity greater that 50 Kg with visibility 800 meters etc (Colour of reflective panels Amber/ Red/ White) complete all as specified and as directed incl taking out old unserviceable cat eye any size & and removing the same from site complete. Make: - Dark Eye/ Safe Zone/ Green Light.

S&F in repairs metal guide post delenator with twin reflector made out of pipe 50mm dia 750mm long and two pillars of plastic metal of dimension 302mm x 167mm fitted with 02 Nos of 110mm dia high reflectivity reflectiors and 02 Nos 70mm x 23mm rectangular reflectors each side for excellent reflectivity in dark hours. Make: - Dark Eye/ Safe Zone/ Green Light.

S&F in repair 80cm dia outdoor type, weather proof, unbreakable polycarbonate face roadside convex mirror for vehicle of high visibility orange visor with floor mount type post and brackets, horizontal and vertical angle adjustment complete all as per manufacturer's instructions (make vertex, KRM or equivalent), fixing to 75mm dia GI pipe 2.10mtr high in post hole of size 60x60x75cm and embedding the same in PCC 1:2:4 type B-1 using 20mm graded stone aggregate including required excavation, complete all as specified and directed by Engineer-in-Charge.

M&L for Identification sign/ cautionary mandatory and information sign board, area exceeding 1.00 Sqm but not exceeding 1.50 Sqm with 2mm thick aluminium composite panal covered by encapsulated lens type retro reflective sheet (grade 3m type II diamond grade ) on both side with green base, fixed on and including stainless steel frame of size 25mmX25mm and hang on 50mm dia stainless steel pipe (fabrication work from SS 304 material ) of height up to 2.00 metre from the natural ground level to top and post embedded in ground with PCC 1:2:4 type B-2 using 40mm graded stone aggregate of size 45cmX45cmX60cm including necessary excavation and earth work complete all as specified and directed. Note: (i) Shape/ Design of sign board as approved by GE. (ii) The letters and symbols etc; on both side shall be as per site requirement and as approved. The size and font of wording as per direction of GE.

S&F in repairs retro reflective cautionary, mandatory and informatory sign board 90 cm equilateral triangle as per IRC 67 made out of high intensity reflective grade sheeting fixed over aliminium sheeting 1.5mm framed with 25mm stainless steel square tube supported on stainless steel 40mm dia pipe 3.0m length incl 0.5m embedded in PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) complete all as specified and directed. The size of foundation shall be 45 x 45 x 60cm. Note:- The stainless steel shall be of SS 304 Gde.

S&F in repairs retro reflective cautionary, mandatory and informatory sign board 60 cm circular as per IRC 67 made out of high intensity reflective grade sheeting fixed over aliminium sheeting 1.5mm framed with 25mm stainless steel square tube supported on stainless steel 40mm dia pipe 3.0m length incl 0.5m embedded in PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) complete all as specified and directed. The size of foundation shall be 45 x 45 x 60cm. Note:- The stainless steel shall be of SS 304 Gde.

S&F in repairs retro reflective cautionary, mandatory and informatory sign board 60x90 cm rectangle as per IRC 67 made out of high intensity reflective grade sheeting fixed over aliminium sheeting 1.5mm framed with 25mm stainless steel square tube supported on stainless steel 40mm dia pipe 3.0m length incl 0.5m embedded in PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) complete all as specified and directed. The size of foundation shall be 45 x 45 x 60cm. Note:- The stainless steel shall be of SS 304 Gde.

Demolition of un reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

Demolition of un reinforced cement concrete in any description and in any position (below or above ground level) complete all as specified.

M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified.

M&L for 60mm thick factory made pre cast cement concrete rubber moulded laquer finish using chemical and admixure inter locking tiles having compressive strength not less than 350 kg/Sqcm, of shape and colour as approved by GE , laid over 25mm thick compacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed.

M&L for 80mm thick factory made pre cast cement concrete rubber moulded laquer finish using chemical and admixure inter locking tiles having compressive strength not less than 350 kg/Sqcm, of shape and colour as approved by GE , laid over 25mm thick compacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed.

M&L for factory made precast cement concrete solid blocks M-30 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size (with plain or interlocking joints as directed) set in cement mortar 1:4 for path edgings etc; embedded in position including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc., complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified.

S&F in repairs ABS Plastic speed breakers (Road Bump) (Cat Part No DA - 1006) of size 750x75x250mm per piece (with two reflectors 70mmx23mm on each piece) duly filled with PCC 1:2:4 type B-0 fixed on road surface with appropriate Nos of steel pins and with epoxy.

New Vishvakarma Udhyog