SPECIAL REPAIR TO JCOs/ORs MD ACCN BLDG NO. 40 AND 72 UNDER GE BARRACKPORE

Amount

Taking down of existing un-serviceable tarfelt / bituminous membrane on roof and parapet of any roof height carefully by cutting chiseling, cleaning the surface by scraping, brooming, brushing etc and removing the rubbish from site complete all as specified and directed.

Demolition of cement concrete as in roofs, floors (other than ground floors), beams, stair cases, landing, chajjas and similar suspended work all as specified and directed.

Taking down cement plaster of any description on brick or stone or concrete surface of wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) averaging 30 mm thick as in roof padding / levelling course with WPC @ 2% by weight of cement complete all as specified and directed. (Note : WPC shall be measured and paid separately).

M&L for rendering 10mm thick on concrete surfaces in RCC roof surfaces with cement mortar (1:3) with WPC @ 2% by weight of cement finished the surfaces even and fair without using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separately)

M&L for rendering 20 mm thick on other than fair face of brick works or concrete surfaces of walls with cement mortar (1:4) with WPC @ 2% by weight of cement finished the surfaces even and smooth without using extra cement complete all as specified and directed. all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L for providing, cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in roof /chajja kerbs or mud stops, top of chajjas, coping, basement for water tank etc rounded or chamfered on edges finishing the surface even and smooth complete all as specified and directed.

M&L for applying evenly a coat of bitumen primer on roof, canopy, chajja, parapet (vertical surface etc) @ 0.40 Litre / Per Sqm by the same membrane manufacturer of density 250C, 0.87 to 0.89 litre and viscosity 70-160 cps after proper cleaning the roof surfaces (horizontal/vertical) and providing APP based polymeric membrane minimum weighing 3.6 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms / sqm) laid on primed surface with side over lap of 80 mm and end overlap of 100 mm, using bitumen torch or by LP gas torching and sealing all joints etc and ensuring complete thermo fusing and applying one coat of aluminum paint @ 100ml per Sqm over it complete all as per manufacturer instructions complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles

M&L for Brick work built in CM (1:6) with well burnt subclass 'B' bricks, straight or curved on plan exc 6m mean radius all as specified and directed.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) as in boundary wall, drain etc complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement.

M&L for 20 mm thick rendering in CM (1:4) including WPC on brick work or concrete surface as in wall including finishing the surfaces even and fair all as specified and directed. (Note : WPC will be measured and paid separately).

Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each.

Taking down chowkats with shutters (without taking down of shutter from the frames)n. exc 1.50 Sqm each.

Taking down shutter of any description exc 1.00 Sqm and n.exc 2 Sqm each.

Taking down shutter of any description n exc 1sqm each.

Refixing Shutter of any description exc 1 sqm but n exc 2 sqm each

Refixing Shutter of any description n exc1 sqm each

S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet colour PVC sheet reinforced with MS square tube for toilet.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as specified of drawing.

S&F 2nd class hard wood plain solid, straight chowkats and frames wrought,frame rebated on the solid,rounded or chamfered,put together with glue pinned at joints,

S&F for flat iron size 25mmx3mm as in hold fast including tarring or coal tar black paint conforming to Fe 410-0 or Fe 310-0 all as specified and directed.

Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

S&F 35mm thick factory made 2nd class hard wood plain framed partly pannel and partly glazed shutter (As per existing shutter type) with lock rail and panel of 12mm veneered board particle board of exterior grade with commercial veneering on both faces. The size of rail and style as per IS-1003

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass/gangue (with sash bars) edges of forming plain chamfered or rounded fitted with cut and mitred bead for securing glass/ gauged etc size of member of shutter as per Pt-I, Section 8, Clause 8.20 (a)

S&F steel window double shutter ( glazed & gauged ) box type hingeswith steel handle frame, peg stay complete with glaging bar( weighing not less than 44 Kg / Sqm ) dovetailed or welded all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for

S&F Framed work such as grills, gratings, Gates including pintle hinges,stops, hand made sliding bolts etc., with ends of bars shouldered, welded and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165.

Dismantling structural steel work including old MS Grills , gates but excluding framed truss etc.

Fixing only Framed work such as framed guard bars,Grills,gates and similar work

S&F in repairs Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repairs Anodised aluminium window and ventilator shutters, fixed type with lowers fixing arrangement including lowers handling system, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/window.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples in window and door as fixed in repair as old door/window.

S&F 3 mm thick sheet glass, ordinary quality in square n.exc 0.5 sqm in each pane and glazing with oil putty or fixed with beads .

All as per Srl item No. 36 here-in-above but including hacking out old broken glass

S&F 100 mm long mild steel, cold rolled medium weight butt hinges .

S&F 100mm long stain less steel hinges all as specified & directed.

S&F 200 mm aluminum , anodised, barrel tower bolts of extruded section .

S&F for 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified & directed.

Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) all as directed

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing rubbish off the premises.

M&L 25 mm thick PCC 1:2:4, type B-1 using 20mm graded aggregate as in sub base and leveling course.

M&L screed bed or bedding layer of mortar for laying floor finishes 15mm thick in CM 1:4 and S&F non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) joint free area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry pointed in coloured cement to match coloured tiles.

M&L for 10mm thick plastering (as backing coat) other than fair faces of brick work or concrete surfaces in CM 1:4 and S&F glazed ceramic coloured tiles in vertical surfaces 350X250X6 to 7mm / 450 x 300 x 6 to 7mm thick set and jointed in neat cement slulrry and pointed in white or colour cement to match coloured tiles .

M&L screed bed or bedding layer of mortar for laying floor finishes 20mm thick in CM 1:6 and S&F Machine cut kota stone slab flooring 18-20mm thick as in floor, Trade of steps etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish complete

M&L for 10mm thick plastering (as backing coat) other than fair faces of brick work or concrete surfaces in CM 1:4 and S&F Machine cut kota stone slab flooring 18-20mm thick as in skirting,riser of steps etc over cement plaster laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish complete.

Taking up or down steel tubing and connections for 15mm bore of pipe all as directed.

Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed.

S&F for 15mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store .

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.)

S&F 20mm bore GI tubing medium grade with all fittings and fixed to walls, ceilings or laid in floors.

Taking up or down 25 mm dia steel tubing and connections, including cleaning for refixing or removal to store .

Refixing old steel tubing of 25 mm bore and connections in new or old position (walls, ceilings, floors etc.)

S&F 25mm bore GI tubing medium grade with all fittings and fixed to walls, ceilings or laid in floors.

M&L for 75mm thick PCC type C2 (1:3:6) using 20mm graded crushed stone aggregate as in plinth protection , finishing cement concrete surfaces even & smooth without using extra cement.

All as per Srl item No. 58 here-in-above but finishing the surface even and fair as in sub floor

M&L coloured Chequred cement concrete tile glossy type 30 cm x 30 cm x 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:6.

M&L Cement concrete type B1 1:2:4 ( 20mm graded aggregate) as in edges of chequired tile path to making slope Interlocking surface to GL.

S&F Curtain rod of cromium plaated 25 mm dia (heavy) complete all as specified and directed

S&F MS bracket powder coated of best approved quality suitable for fixing 25 mm bore chromium plated (heavy) rod fixed on wall as directed

Supply only Liquid water proofing compound

M&L for Preparing surface of new plastered wall and applying two coats of oil bound distemper over a coat of Avg 3mm thick wall care putty and alkali resistant primer complete all as specified and as directed

M&L for two coat of oil bound distemper on walls over a coat of alkali resistant primer and average 3mm thick wall care putty including complete removal of existing treatment

M&L for preparing surfaces of Old ceiling and applying one coat of white wash.

M&L for Preparing surface new plastered and applying two coats of cement base paint over a coat of chalk whitning.

M&L for Preparing surface Old plastered and applying two coats of cement base paint

S&F in repairs for 15 mm Bib taps, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore.

S&F in repairs Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle/ Capeston head screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed.

S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges

S&F in repair 15mm bore n fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm.

M&L for 75mm PVC(SWR) dia floor trap plain with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4 )

Demolition and breaking up drain pipes PVC or AC pipe set in cement mortar for 100mm bore pipe .

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls .

All as per Srl item No. 77 here-in-above but fixed in trenches

S&F for 110 mm bore PVC (SWR) bends any radious .

S&F for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with access door .

S&F 110 mm PVC (SWR) vent COWL

Dismantling of 75mm bore cast iron/ reinforced concrete drain pipes/ PVC (SWR) pipes, jointed in any type and taking out from wall/ceiling/floor/trenches and any position complete all as directed.

S&F 75 mm bore PVC (SWR ) pipes single socketed, in any lenth with rubber ring fixed to wall with suitable MS/PVC clamp including dismantling the old damaged pipe .

All as per Srl item No. 83 here-in-above but fixed in trenches

S&F for 75mm bore PVC (SWR) bends any radious provided .

S&F for 75mm bore PVC (SWR) bends any radious provided with access door .

S&F vitreous china wash down water closet pan (pedestal pattern) white coloured with integrated 'P' trap outlet including 110mm PVC (SWR) WC connector with lip ring, conection to flush pipe and out going pipe and plastic water closet seat cover white coloured closed pattern with flat bottom and PTMT hinging device complete fixed in repairs.

S&F vitreous china wash basin white colour flat back size 550 x 400mm including brackets and fixed in repairs

S&F in repairs 32 mm dia waste coupling of PTMT (half or full threaded) all as specified and directed by EIC

S&F in repairs LDPE pipes 32mm dia, of pressure rating 6 kg/sqcm fixed to wall or laid in floor etc including necessary pipe fittings and fixing arrangement complete all as specified.

S&F in repair for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall including provision of PVC connection pipe 15mm bore with brass union and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete as in repair all as specified and directed.

S&F in repairs ball brass valves high pressure, with polythelen float and fly nut complete screwed for iron pipe of 15 mm bore all as specified

S&F in repairs plastic seat cover , white , closed pattern with flat bottom and fixed cover with mild steel chromium plated or alu hinging devices

S&F in repairs 15mm bore stop valve fancy type chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle/ Capeston head screwed both ends for iron pipe or for unions all as specified and directed.

S&F in rapair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

M&L 20 mm thick granite tile machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the of grinite stone including grinding and polishing .

S&F for 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including fixing cover of tank with its locking arrangement, making hole for inlet, outlet and overflow connection including dismantling / taking down old PVC water tank, ball valve etc complete all as specified and directed.

Disconnecting existing tanks of capacity n.exc 500 litre setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Including Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. complete all as directed.

M&L for preparation of new wood surface over 10 cm girth or width and apply two coat synthetic enamel paint over a coat of pink primer

M&L for One coat of synthetic enamel paint after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth all as specified and directed.

M&L for two coat of synthetic enamel paint over one coat of red oxide primer to the new steel surfaces of any description including preparation of surfaces exc. 10cm width or girth .

M&L for preparation of old steel surface over 10cm girth or width and apply two coat synthetic enamel paint over a coat of red oxide primer.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade(MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing one light point controlled by one switch complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are used same make/brand only and including cutting & chasing work at any height and shall be deemed in to included in quoted rate only.)

All as per Srl item No 125 here-in-before but one fan point controlled by one switch and one regulator.

All as per Srl item No 125 here-in-before but one exhaust fan point controlled by one switch .

All as per Srl item No 125 here-in-before but one 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per Srl item No 125 here-in-before but one 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per Srl item No 125 here-in-before but one bell/buzzer point controlled by one bell push.

All as per Srl item No 125 here-in-before but one light point controlled by two 2 way switches.

All as per item No.125 but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

S&F modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

S&F modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed.

S&F modular type bell push 6 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed.

S&F modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

S&F modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

S&F modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

S&F red color lighting indication lamp 6 Amps, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

S&F modular type step fan speed regulator 100/120W, 2 module,230volts,AC, 360 degree rotation 0 to 4 steps, ISI Marked complete all as specified and directed.

S&F call bell AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed.

S&F angle lamp holder, insulated body with back plate for batten fittings including LED lamp 10 watts complete all as specified and directed.

Fixing only 10 watt LED bulbs including taking out old as directed. (Note: Materials shall be supplied by the department as free for fixing only under Sch 'B'.)

S&F ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

S&F in repair TPN distribution board 4 way acrylic door 415 volts AC, TPN for flush mounting with 100 Amps copper busbar , neutral bar , earth bar and MCB incomer of rating upto 100 Amps , MCB SPN/DP and MCB SP as outgoing and complete connecting cable links with top and bottom removal gland plate with IP 43 DBs protection and including making good the distrubed surfaces to match with existing surface and colour coated complete all as directed and as directed.

S&F SPN distribution board 8 way acrylic door 240 volts AC,SPN for flush mounting with 200 amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 200Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat and including removing old unserviceable item all as specified and as directed. Make:- Legrand cat No.5076 21 8 Way / Hager cat ref No.VYS08G (Acrylic door)/L&T Cat ref:-DBSPN008GD or equivalent in any approved make.

S&F MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed. Make:- Legrand/Hager/Havells or as approved make

S&F MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed. Make:- Legrand/Hager/Havells or as approved make

S&F MCB FP.63 to 100amps 10 KA, 415 volts, 50 Hz, 'B' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed. Make:- Legrand/Hager/Havells or as approved make.

M&L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unserviceable submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M&L Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size (45X 45X 45) CM, RCC cover 1:2:4 type B1 of size (45X45X6) CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.

Taking down of ceiling fan 1200/1400 mm of any make & capacity from any height overhauling of fan motor of any size and removing unserviceable grease, bearings, bushes, split pin, nuts and bolts and cleaning with petrol/kerosene applying new grease and reassembling complete including replacement of wornout spares with new like split pin, nut & bolts and material and labour for painting to ceiling fan complete body, blades & down rod etc of any sweep/make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation surfaces with black paint complete and refixing the same to its original position and proper electric connection to be made and all as specified and directed. Make of paint:-Asian/Berger/Nerolac (Note:-Painting work to be carried out after dismantling of ceiling fan)

Taking down of Exhaust Fan of size 300 mm of any make & capacity from any height and removing from frame and refixing the same including removing unserviceable grease, bearings, bushes, split pin, nuts and bolts and cleaning with petrol/kerosene apply new grease and reassembling complete including replacement of wornout spares with new like split pin, nut & bolts and material and labour for painting to exhaust fan complete body, blade assembly,frame etc of 300/250 mm sweep /make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces with black paint complete and refixing the same to its original position and proper electric connection to be made and all as specified and directed.Make of paint:-Asian/Berger/ Nerolac (Note:-Painting work to be carried out after dismantling of exhaust fan)

Taking down electric meter of any make and capacity from any height and removing from frame and refixing the same including removing unserviceable, nut and bolts and cleaning and reassembling complete including replacement of wornout spares and refixing the same to its original position and proper electric connection to be made and all as specified and as directed.

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 230 to 300 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5cm apreature MS jali and proper wooden frame for to avoid insects fix at outer surface of wall and making good the disturbed surface area complete all as specified and directed.

S&F GI bracket pipe of size 25 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on PCC & Steel poles/on wall surfaces and including suitable MS flat iron clamps of 30 x 6 mm thick -02 Nos suitable for fixing any place of poles with nuts, bolts & wahsers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

S&F in repair suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts suitable for AC's/Geysers complete all as specified and directed. Make:- Legrand cat No.5078 11 20A SP,2P+E/ Hager cat ref no.VYA120C / Havells Cat No.DHDPUSN020/L&T Cat No.DBMPS220SD or as approved make Note:- MCB SP 20Amps will be deemed to be quoted rate

M&L for GI tubing 40mm dia "Medium Grade" in any length including embedded in wall two ends duly welded MS holdfast at two ends of GI pipe and providing PCC in wall and making good disturbed surfaces complete allas directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Supply and filling in and spreading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

Fixing only 20 watt LED tube light including taking out old all as directed.

Fixing only 1x6 surface mounted LED light including taking out old all as directed.

Fixing only 1x10 mirror LED light including taking out old all as directed.

Fixing only Fresh Air Fan 250 mm sweep and connecting up including provision of cable from ceiling rose/ connecting to exhaust fan and testing complete all as specified and directed.

Fixing only LED security light fitting of capacity 35 Watt LED street light fitting including taking out old omplete all as specified and directed.

Fixing only water storage heater (Geyser) of 25 ltrs capacity, vertical type all as directed.

Laying only cable of size 35 Sqmm and 4 core including taking out old all as directed. (Note applicable for Srl items Nos 166 to 172: Materials shall be supplied by the department as free for fixing only under Sch 'B'.)

M/S H.P Singha

Shree Mahabir Builders