Construction of Compound Wall and Painting to Govt. Junior College at Singanamala (V&M) and Construction of Compound Wall to Govt. Jr College at Narpala (V&M) and Construction of Compound Wall to Govt. High School (Boys) at Narpala (V&M) and Providing Additional Amenities to Govt. Jr College Old Town at Ananthapuram (V&M) in Ananthapuram District - Estimate Cost of Rs. 112.20 Lakhs.

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in Loamy and Clayey Soils like B.C. Soils, red earth & Ordinary Gravel (SS 20-B) including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work for Foundation of Building.(APSS No. 308) - Singanamala

Filling with carted sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work (APSS No.309 & 310) - Singanamala

Refilling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work (APSS No.309 & 310)- Singanamala

Plain Cement concrete (1:5:10) Proparation nominal mix (coarse aggregate) for foundation levelling courses and bellow flooring beds using 40 mm size (SS5) Hard Granite metal up to plinth level from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc.,complete for finished item of work, inluding centering, shuttering as per APSS. No. 402. for Machine Mix Base course- Singanamala

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh batching / Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 Kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, Plinth , Pedastals (below plinth) (APSS No. 402 & 403)For Footings- Singanamala

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh batching / Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 Kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, Plinth , Pedastals (below plinth) (APSS No. 402 & 403)For Columns- Singanamala

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh batching / Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 Kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, Plinth , Pedastals (below plinth) (APSS No. 402 & 403)For Plinth beams- Singanamala

Cost supply and fabrication of FE 500 grade HYSD steel bars of different sizes of C/C of all materials labour charges for wrought and put up like decoiling straighting cutting bending cranking using biniding wire for tying after placing at required place and position as for design and drawing of specified structure including cost and conveyance of all materials and lobour charges etc., complete for finished item of work as per design and drawing and as per engineer -in-charge at site.- Singanamala

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sqm for walls for Superstructure walls.- Singanamala

Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.- Singanamala

Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). - Singanamala

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls.- Singanamala

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for Internall walls.- Singanamala

Cost, supply, fabrication and fixing of MS iron gate using MS angles, pipes including cost and conveyance of all materils and all labour charges etc completed.,- Singanamala

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in Loamy and Clayey Soils like B.C. Soils, red earth & Ordinary Gravel (SS 20-B) including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work for Foundation of Building.(APSS No. 308) - Narpala

Filling with carted sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work (APSS No.309 & 310)- Narpala

Refilling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work (APSS No.309 & 310)- Narpala

Plain Cement concrete (1:5:10) Proparation nominal mix (coarse aggregate) for foundation levelling courses and bellow flooring beds using 40 mm size (SS5) Hard Granite metal up to plinth level from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc.,complete for finished item of work, inluding centering, shuttering as per APSS. No. 402. for Machine Mix Base course- Narpala

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh batching / Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 Kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work For footings- Narpala

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh batching / Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 Kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work For columns- Narpala

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh batching / Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 Kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work Plinth beams- Narpala

Cost supply and fabrication of FE 500 grade HYSD steel bars of different sizes of C/C of all materials labour charges for wrought and put up like decoiling straighting cutting bending cranking using biniding wire for tying after placing at required place and position as for design and drawing of specified structure including cost and conveyance of all materials and lobour charges etc., complete for finished item of work as per design and drawing and as per engineer -in-charge at site.- Narpala

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sqm for walls for Superstructure walls.- Narpala

Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.- Narpala

Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). - Narpala

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls.- Narpala

Cost, supply, fabrication and fixing of MS iron gate using MS angles, pipes including cost and conveyance of all materils and all labour charges etc completed.,- Narpala

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in Loamy and Clayey Soils like B.C. Soils, red earth & Ordinary Gravel (SS 20-B) including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work for Foundation of Building.(APSS No. 308) - Narpala

Filling with carted sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work (APSS No.309 & 310)- Narpala

Refilling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work (APSS No.309 & 310)- Narpala

Plain Cement concrete (1:5:10) Proparation nominal mix (coarse aggregate) for foundation levelling courses and bellow flooring beds using 40 mm size (SS5) Hard Granite metal up to plinth level from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc.,complete for finished item of work, inluding centering, shuttering as per APSS. No. 402. for Machine Mix Base course- Narpala

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh batching / Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 Kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, Plinth , Pedastals (below plinth) (APSS No. 402 & 403) For footings- Narpala

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh batching / Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 Kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, Plinth , Pedastals (below plinth) (APSS No. 402 & 403) For columns- Narpala

Vibrated Reinforced Cement Concrete M 25 Design Mix ( by weigh batching / Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 Kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, Plinth , Pedastals (below plinth) (APSS No. 402 & 403) Plinth beams- Narpala

Cost supply and fabrication of FE 500 grade HYSD steel bars of different sizes of C/C of all materials labour charges for wrought and put up like decoiling straighting cutting bending cranking using biniding wire for tying after placing at required place and position as for design and drawing of specified structure including cost and conveyance of all materials and lobour charges etc., complete for finished item of work as per design and drawing and as per engineer -in-charge at site.- Narpala

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sqm for walls for Superstructure walls.- Narpala

Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.- Narpala

Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately). - Narpala

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls.- Narpala

Cost, supply, fabrication and fixing of MS iron gate using MS angles, pipes including cost and conveyance of all materils and all labour charges etc completed.,- Narpala

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sqm for walls for Superstructure walls. FIRST FLOOR - ATP

Plastering with CM 2 coats, 12mm thick, base coat in CM (1:6), 8mm thick and top coat in CM (1:4), 4mm thick with sponze finishing including cost and conveyance of all materials and all labour charges etc., complete for walls. FIRST FLOOR - ATP

Supplying, fitting and placing heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost and conveyance of all materials and all labour charges etc., complete.- ATP

Supply & fixing pre-painted galvalium trepizoidal profile roofing sheets with 0.47mm thickness,coating Alu-zinc coating AZ 150 GSM. Tensile strength : 550 MPA,paint coating : Regular modified polyster painting. Thickness (top) 18-20 microns,(bottom) 5-7microns including C/C of all materials like sheets, J bolts, bitumen washers etc. with or wothout ridge with sales & all other taxes & all labour charges etc. complete for fixing sheets in position.- ATP

Flooring with vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8 - 10 mm of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work. First Floor- ATP

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials- ATP

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 - ATP

Supply and Fixing of 25mm dia 2.2mm thick concealed in Roof Slab P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles and decolam board for switches for Light, Fan and separate plug point including all labour charges etc., complete including cost and conveyance of all material and labour charges for the finishing item of the work.- ATP

Supply and Fixing of 20mm dia 2mm thick concealed in wall P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles and decolam board for switches for Light, Fan and separate plug point including all labour charges etc., complete including cost and conveyance of all material and labour charges for the finishing item of the work.- ATP

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, 6A, flush type Neon Indicator, 8 or 9 module Hot Dip galvanized 18 SWG Module metal box with earthing terminal and 8 Modular Horizontal / Vertical Cover Frame covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings- ATP

Supply and run of 2 of 14/0.3mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.- ATP

Supply and Run of 2 of 2.5 sq. mm WPSC (Weather Proof Single Core) Aluminium cable along with No.10 SWG G.I. bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains- ATP

Supply and fixing of 6A 3 pin wall plug Module Modular Socket with a 6A Modular Switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.- ATP

Supply and fixing of 20W,2000 lumens T8, , not less than 1100 mmlength LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. as per IS 10322 (Part 5/ Sec 1)..2012 etc., complete including all accessories and connections etc., completed with 20 W LED Retrofit Tube light. Make: a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.- ATP

Supply and fixing of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories including electronic stepped regulator and including cost and conveyance of all material and labour charges for the finished item of the work. Makes: Crompton Decora / Bajaj Ultima- ATP

Supply and fixing SPN Distribution board with IP-43 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.- ATP

( Ruppes in Seventy Nine Lakhs Seventy Seven Thosuand Nine Hundred and Seventy Two Only)