Loading…
Loading…
Tender Value
₹4.9 L
EMD Value
₹4,888
Closing Date
2 Feb 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Ankleshwar nagarpalika chief officer
Providing Erecting & Installation of 25 Mtr High Mast at Sukavali Processing plant at ankleshwar.
269248
101 of 2025-2026
Open
Civil Works - Others
Bharuch
3 documents required · 3 mandatory
₹900
Chief Officer, Ankleshwar Nagar Palika, Ankleshwar
₹4,888
23 Jan 2026
23 Jan 2026
23 Jan 2026
2 Feb 2026
23 Jan 2026
NAME OF WORK : PROVIDING, ERECTING & INSTALLATION OF 25 MTR HIGH MAST
Item No. & Description Qty. Rate Per Amount
Making trench in Hard Murrum / Tar Road of suitable width
of 90 cm or required depth for laying any size of cable or
locating the fault all over the run and back filling the same
and making the surface as normal ground. 38.00 74.74 Rmt
Providing & laying approved make Double walled
corrugated pipes (DWC) of polyethylene(conforming to IS
14930 II )with necessary connecting accessories of same
material at required depth in existing trench for laying of
cable. below ground / road surface for enclosing cable
(A)50 mm outer dia 40.00 62.62 Rmt
providing and erecting Mains with ISI marked, 1.5KV grade
electrolyte multi stranded, annealed copper conductor with
heat resistant PVC insulated conforms to IS 694, IEC -
erected in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs, nuts and
bolts if required.
(e) One wire 6.00 sq. mm 5.00 53.53 Rmt
(h) One wire 25.00 sq. mm 5.00 236.34 Rmt
Supplying and erecting Flexible PVC insulated multi strand
multi core 1.1 kv grade ISI marked copper wires of following
size to be erected as directed.
h) 2.50 Sq.mm 3 core round PVC sheathed 360.00 77.77 Rmt.
Supplying and erecting LED street light / Flood light fittings
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than
lm/w and corrosion free High pressure die cast aluminum
housing with smooth finish powder coated and heat sink
extruded aluminium with diffuser and Polycarbonate optics/
lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more
than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity
ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED
driver efficiency > 85 %.( fittings required LM-79 & LM-80
Item No. & Description Qty. Rate Per Amount
(NOTE: Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may select
any wattage capacity between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral
and ,Light must have 440VAC line supply with over-
voltage protection.
(vii) above 200 to 250 watts Cat-lll 12.00 10768.62 Each
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured
cable multistrand / Solid Aluminium conductor for 1.1 KV.
to be laid on wall with necessary clamps or in existing
trench / pipe of following size of cables
(b) 4 core 6 Sq. mm 50.00 126.25 Mtr.
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured
cable multistrand Aluminium conductor for 1.1 KV. to be
laid on wall with necessary clamps or in existing trench /
pipe of following size of cables
(b) 4 core 25 Sq. mm 44.00 190.89 Mtr.
Providing and, fixing heavy duty flange type brass cable
gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc for
following size of cables.
(e) 2 to 4 core 25 Sq. mm 2.00 51.51 Each
Solder less crimping type Aluminium lugs conforming to IS
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.
Providing & erecting 415 V MCB Four Pole for Motor &
Inductive Load (C Curve) having 10KA breaking capacity &
confirms to IS :8828 in existing box having following
(C) 63 Amp. Cat.III 1.00 737.30 Each
providing and erecting Approved make Four pole moulded
case circuit breaker having breaking capacity ICU of 25 KA.
at 415 V,having normal current rating up to 25 A to 100A.
with Fixed thermal & magnetic release suitable to work on
A.C. supply 50 c/s. with all internal connections & complete
erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III 1.00 6173.12 Each
Providing & erecting weather proof, dust & vermin proof,
floor mounted front operated indoor type cubical panel
board necessary IP-42 and above protection as per
approval from engineer incharge made from 14 SWG thick
CRC M.S. sheet for outer body & doors, 16 SWG thick CRC
M.S.sheet for internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal partitions &
cable alley as per requirements & instruction of engineer-in-
charge with erection of
Item No. & Description Qty. Rate Per Amount
supplied switch gears, BUSBARS, suitable size of inter
connecting PVC copper wire / copper-aluminium strips,
rubber grommets, rib, bakelite control fuses/MCB for
measuring instruments, earth bus & earth bolts, foundation
flange - bolts-base Plates, sufficient nos. of hinged doors,
handles with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice
board,necessary ventilation,earthing strip complete. The
Panel shall be painted with epoxy powder coating.
(The rates excludes the cost of switchgears, bus bars, inter
connecting mains & Copper Aluminium strips, meters,
Fuses etc. The dimension shall be measured excluding
base beams) The panel shall be supplied with following
approved manufacturers with following size.
(B) The standard companies switch gear shall be used
and only manufacturers at CPRI approved factory as
per IEC 61439 for beneficial use.
(ii) with 550mm depth 1.00 19387.96 Sq.Mtr
Providing , erecting , fabricating the M.S. structure as per
requirement on site incorporating proper size of M.S.
angles,square,round, flats, bars, channels, sections
complete with cutting, welding, grinding & finishing duly
painted with one coat of red oxide with erection on site as
per direction of engineer in charge with necessary grouting,
cementing, plastering & finishing complete. 25.00 77.77 Kg.
Supplying and erecting approved make suitable panel
indicator lamps of LED type lamp, lens cover, Bakelite
holder complete erected with necessary connections. 1.00 43.43 Ea.
Supplying & erecting earth pit of minimum bore dia.150mm
size approved make Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion
free hot dipped G.I.Pipes having Outer pipe dia of 50mm
having 80-200 Micron galvanising, Inner pipe dia of 25 mm
having 200-250 Micron galvanising, connection terminal dia
of 12mm with constant ohmic value surrounded by highly
conductive compound with high charge dissipation suitable
for following type of applications with chamber and heavy
duty cover.(approved make OEM has to submit test
certificate) & having back filling compound of (B) Inner
chemical (CCM Compound)- Resistivity:- 0.2 / meter
testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no
load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to
retain moisture for long time Necessary test report must be
(b)For Electrical installation up to 11 KV in normal soil.
Length of Pipe : 2.00 mtrs
Back filling Compound :1 no. Bag of 25 Kg. 1.00 5760.03 Each
Providing and erecting Annealed bare Copper wire 8 to
Item No. & Description Qty. Rate Per Amount
Supplying, erecting, testing, commissioning approved make
M.S. Polygonal High Mast Pole having following general
(a) Polygonal Section fabricated from M.S. Plate confirms
BSEN 10025 & Hot deep galvanized minimum 65/86 micron
(as per IS 2629 /1985) Lantern carriage with ring and
rubber lines for erection of luminaries of suitable site.
(b) Maximum telescopic section not more than four
(c) Double drum gear pipe motorized winch with 6mm dia
S.S. Rod (For 16 mtr and above size)
(d) Approved make L.E.D. aviation light = 1 No. Lightening
arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core
ISI copper cable Unarmoured.
(e) Bottom most section suitable for mounting reversible
motor and switchgears having door not more than 1400mm
x 300mm with waterproof gasket & hinges & locking
(f) Pole structure comprises suitable size of reversible
motor, cable and necessary switchgears with control panel.
(g) bottom section shall have suitable size of thickness
supports ribs foundation bolts nuts etc.
(h) Item not comprises the cost of lanterns.
(i) Necessary Cement Concrete foundation as per IS
including testing & commissioning of the entire structure for
following size of High Mast poles
[11] High Mast 25 Mtr. TOP AJF 170 Mm, BOTTOM AIF
450 Mm, No. of sec. No. - 2, Bottom Thickness - 4 mm, Top
Sec. - 3 mm, Size Base Plate -dia. 680 mm x 35 mm thick,
Foundation Bolt Size M30 x 10T mm, Qty - 12 NOS.,
Suitable for mounting Fttjng of Light - 12 1.00 265187.62 Each
Providing & erecting 240 V MCB double pole switch for
lighting Load (B Curve) having 10 KA breaking capacity &
confirms to IS : 8828 in existing box having following
(B) 40 Amp. Cat.III 1.00 295.93 Each
Supplying & erecting approved make Digital time switch
having lithium cell 6 years operative and operate battery
backup 1 channel day clock with 14 memory programme,
suitable to operate on 240V + 5%, 16A with, floating
contacts Minimum switching setup time 1 minimum & LCD
display. Also comprised permanent ON/OFF switching.
Programming switches & housed in fire proof thermoplastic
enclosure & transparent cover erected as required with
necessary connection erected as directed. 1.00 3168.37 Ea.
Item No. & Description Qty. Rate Per Amount
Supplying & erecting power contactor ,AC3 duty for time
switch complete erected as per direction Cat III
[D] 4 pole 440V 40 Amp. 1.00 2782.55 Each
Supplying and erecting triple pole & neutral 440V / 500V
panel mounting Copper Busbars with four equal Nos. of
electrolyte bus having current density not more than
Amp. / sq.mm (Rated current / cross section area) duly
wrapped with colour insulating tape for phase sequence of
following current carrying capacity, erected with necessary
bus bar supports /insulators, main cable socket to each bar,
erected in existing cubical panel with necessary
(A) Suitable for 100 Amp. Capacity 0.80 1961.42 Rn.Mtr
Supplying following size of Light duty “A” Class G.I . Pipe
& erecting as directed by Engineer-in-charge.
(B) 50 mm dia 3.00 300.98 Mtr.
Total Amount Rs.
Total Amount Rs.
I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage
(should be writen in figures and words) of the Estimated rates mentioned above amount of my / our
Tender works out as under.
Estimated Amount Estimated Amount
Put to Tender Rs. 4,88,891=00 Put to Tender Rs. 4,88,891=00
Add % Rs. Deduct %Rs.
Total Rs. Total Rs.
(In Words (In Words
Stamp with Signature of Contractor
Consultant Municipal Engineer
SKV Consultancy Services LLP Ankleshwar Nagarpalika
Ankleshwar Nagarpalika
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01 Tender.pdf
02 Schedule B.pdf
03 Form B 2.pdf
04 Specification of Electric Work.pdf
05 Approved Make List (1).pdf
06 GR 2025.pdf
Download all tender documents and submit your bid