Civil Work For Proposed A Type Residential Building Block (G+2) (2 Blocks) of Shree Narmada Khand Udyog Sahakari Mandali Ltd. at Dharikheda, Post: Timbi, Ta: Nandod, Dist: Narmada, 393140, Gujarat, India.

Amount For Type A Block (2 Blocks)

This BOQ shall be read in conjunction with Technical Specifications and drawings issued separately.

All workmanship shall be first quality and shall conform to all the requirements of this specification (mentioned elsewhere in tender documents).

Contractor shall be deemed to have visited the site prior to submitting his Bid and made all necessary inspection and investigations and to have decided for himself the means of access and working space, the nature of the ground and subsoil, if any, level of water table, extent of rock demolitions, alterations, support of neighbouring properties, etc.

Electricity & construction water required for works shall be free arranged by the Company at one point.

BOQ is provisional, the Payments shall be made as per actual work done at site as per the joint measurement sheet.

Measurement shall be as per net area for isolated and combined footings, provision of slopes and working space, (if required) will not be measured and shall not be paid.

All levels mentioned in GFC drawing are with respect to existing ground level at site or, for trenches and pits, the bottom of mass excavation, whichever deeper. At the time of handing over the site to the Contractor, if in case, any variation, discrepancy between Good For Construction(GFC) and existing site conditions is noticed, the same should be brought to the notice of Engineer-in Charge/ Architects/Consultants in writing.

Levels are to be taken before and after excavation and as directed by Engineer-in-charge for calculating the depth of excavation.

Contractor should obtain JMS with Engineer / QS / Employer prior to the start of excavation of rock.

Contractor shall provide surveyor along with Total Station Instrument along with other surveying equipment at site when required.

Contractor to ensure the salvage of material from existing structure in demolition to the extent possible in consultation with Engineer / Employer. This Material is Property of Employer, Contractor has no right to takeout of the site unless otherwise instructed.

Contractor shall use the latest mechanical means of excavation suitable to achieve the required excavation level within the agreed time period. All such equipment mobilized on the site shall be in perfectly working condition, well maintained, ensuring no down time during the entire agreed working period. A list of all such equipment, manpower, machinery and the proposed infrastructure that the contractor is going to mobilize for the work shall be submitted to the Engineer in charge before start of work for his approval along with the calculations for estimated output per equipment.

The final approved founding strata shall be left absolutely clean by removing loose, slushy soil, murrum and weathered rock with necessary tools & tackles, cleaning the surface by wire brush and carting away debris, dewatering to keep site dry at all times etc. all complete to the approval of Engineer in charge.

The Contractor shall take all necessary measures for the safety of the excavation, persons working, tools and plants working in and near the excavation pits, property and people in the vicinity. Contractor shall provide all health and safety including necessary barricades, protecting excavated areas, signages etc. and contractor shall indemnify employer against any accident, loss, damage to either personnel or property etc.

Required Dewatering in Vendor scope

WC Policy In Vendor scope

Required Lodging, Boarding, Travelling in Vendor scope.

Required PPE's in Vendor scope.

Pre-Medical Test from External Doctor in Vendor scope.

SHE policy as per Factory Guidelines

Labor License in Vendor Scope (If Required).

Experience Enginner & Supervisor shall Provide by Vendor during Execution.

All Required Scaffolding in Vendor scope.

Vendor Tools, Tackles and Material Security at site is Vendor responcibility

Disposal/carting away surplus excavated earth/debris etc. outside the Owner's premises as directed and instructed by Engineer. Disposal shall not be measured in Terms of Truck Loads but measured in terms of cubic meters of excavation and dismantling carried out and measured under relevant items minus actual back fill quantities as measured.

Back Filling in Foundation and plinth with approved materials in layers of 150 mm thickness, consolidating each layer by ramming and watering and rolling with vibro roller for a compaction to the modified proctor density of 95 percent of approved borrow pit. (Minimum 1.60 gms / Cu.cm.)

Providing and laying close graded Granular sub base (GSB), conforming to 25% CBR conforming to grading-2 of table 400-1 of MoSRTH specification laid in layers not exceeding 150 mm thick compacted to 125mm, 2 layers, spreading to level gradient and camber using motor grader, rolling at Optimum Moisture Content using vibratory power roller of 8 - 10 Ton operational weight to acheive not less than 98% proctor density (IS2720 Part-8). including all material, labour, machinery with all leads & lifts etc. complete. all as laid down in Clause 401 of MORTH etc complete as directed by Engineer in charge. (for foundations, plinth and plinth protection

Providing pre ­ construction `Anti-termite treatment' of building including foundation trenches as per IS specifications (vide IS:6313 Part II of 1981) through specified firms dealing with pest control work (approved by consultants) giving ten years service guarantee. Pressure pump shall be used to carry out spraying and injecting operations to facilitate proper penetration of chemicals into the soil. (The area of treatment shall be building size + 1 Meter all around the periphery of the building

Providing, mixing and laying plain cement concrete with 40 mm nominal size graded aggregates of approved quality as a leveling course under the column foundation, wall foundation, cable trenches, other trenches, machinery foundations, raft foundations, pipe supports, plinth beam, as floor sub base, Drain etc. including ramming, leveling, curing etc. complete at any level (i.e. up to any depth or height from ground level). Please consider the cost of form work if required any.

Providing, mixing, Batching and laying Reinforced cement concrete M:25 with 20 mm and downsized aggregate in all type of works such as foundation and superstructures, footings, pile caps, raft beams, columns, runners, coping beam, walls, slabs, lintels, tie-beams, canopies, staircase, fins, ledge, ugwt, drain etc. including vibrating, tamping, curing, complete as per the drawing and specification Excluding the cost of plywood form work including necessary centering for alignment and levels for columns, blocks, pedestals, lintels, beams (regular and inverted), slabs, chajjas, copings, gutters, pardi, facias, fins, bands, walls, staircases, slopping RCC elements, rain water chutes, etc. of rectangular, square shapes, curve, including strutting, shoring, bracing, propping, staging, water retaining structure / any type of structure member, etc. keeping the same in position during the concreting and removal of the same after a specified period, etc. complete as per drawings and specifications. The framework shall ensure smooth finish surface without any additional rendering. Rate to include coating formwork with approved quality of non-staining mineral oil. Note: Mix design details to be got approved before commencement of work.

Providing, Fabricating & fixing in position Reinforcement Steel for RCC work with Thermo mechanically Treated (TMT) bar of various diameters and grade of steel as specified below conforming to IS specification including straighting, cutting, , bending, hoisting, fabricating and placing in position at all heights & levels according to drawings including preparation of bar bending schedules and obtaining their approval from consultant and binding the reinforcement with GI annealed binding wire in two strands of 18 gauge and providing PVC / cement mortar cover blocks for placing the reinforcements in position and for maintaining the cover specified and/or according to relevant IS codes. Note : Reinforcement shall be measured only in lengths of bars as actually placed in position on standard weight basis, no allowance being made in the weight for rolling margin, chairs of any shape & profile, spacer bar of any shape & profile. Cover block, wastages and binding wire shall be included in the quoted rate and to include lead, lift, placing at all levels and as per the approved bar bending schedule etc all complete.

Providing & Fixing Fair face form work with good quality water proof timber /ply wood / steel of required thickness and smooth surface Below finished ground floor level for foundations, footings, base of columns, walls, columns, pedestals, plinth/ground beams, mass concrete, trenches etc.

Providing & Fixing Fair face form work with good quality water proof timber/ply wood / steel of required thickness and smooth surface Above finished ground floor level for columns, beams, suspended floors, roofs, lintels, cantilevers, staircases, landings, balconies, domes, arches, circular overhead tanks etc. for all heights.

Providing brick work in cement mortar 1:4 (1 cement 4 coarse sand) in 230mm Thk. walls, chambers etc. at all heights, places and position above or below plinth/graded level including providing two nos. 8 mm diameter MS bars at every fourth layer, raking out joints, curing, scaffolding etc. complete excluding plastering and painting as per specification. Using burnt clay bricks of class designation 5 / (Strength not less than 3.5 N/mm2 if locally available bricks) of nominal dimension

Providing brick work in cement mortar 1:4 (1 cement 4 coarse sand) in Partition walls, chambers etc. in thickness 115 mm at all heights, places and position above or below plinth/graded level including providing two nos. 8 mm diameter MS bars at every fourth layer, raking out joints, curing, scaffolding etc. complete excluding plastering and painting as per specification. Using burnt clay bricks of class designation 5 / (Strength not less than 3.5 N/mm2 if locally available bricks) of nominal dimension

Providing and laying 12 mm thick internal cement plaster to all surfaces of AAC BLOCK masonry, and R.C.C. in C.M. 1:4 finished smooth with cement punning including scaffolding, racking of joints, racking of RCC surface, curing, etc. complete including providing and fixing G.I. chicken wire mesh of 150mm overlap either side of joint of the junction of R.C.C. / P.C.C. and masonry, Bonding chemical etc as directed by Engineer-in-Charge. (For cement punning, the proportion of lime and cement shall be 1:10). The item is inclusive of grooves up to 12 x 12mm, drip moulds (50 mm wide x 12 mm thick), bands of any width etc. complete.

Providing and applying 20 mm thick. Double coat external sand faced water proof plaster(using river sand only) in 2 coats over masonry surfaces, concrete surfaces, etc. First coat 12 mm thick in C.M. 1:4 & second coat 8 mm thick in C.M. 1:3 at all heights including scaffolding, racking of concrete / masonry surfaces, curing, etc. complete including providing and fixing G.I. chicken wire mesh of 150mm overlap either side of joint of the junction of R.C.C. / P.C.C. and masonry, Bonding chemical as directed by Engineer-in-Charge. The item is inclusive of grooves up to 12 x 12mm, drip moulds (50x12 mm), bands of any width etc. complete. The plaster should be dabbed with a sponge pad to gice a uniform finish etc.Note: Yellow Sand to be used For Plaster work.(Note: For External Plaster Use Ambuja Kavach Cement)

Providing and laying cement water proofing of average 115 mm. thick (average) for terraces, balcony and at all floors using water proofing compound of approved make in three layers first layer / base coat of 15mm cement mortar using CM 1:3 (1 cement : 3 coarse sand) second layer of arranging brick bats in CM 1:3 according to the slope and third layer of 20mm thickness in CM 1:3 (1 cement : 3 coarse sand) including addition of water proofing compound and finishing the top with neat cement @ 2.75kg / m2 and wired finish, including laid to proper slope to drain of water entirely, including rounding of the junctions and extending them up to 30 cm. including curing, scaffolding for all leads and lifts for all heights / all levels all as per specifications and direction of Engineer - in - charge. The contractor should give a guarantee bond for 5 years as per the format.

Providing and applying Three coats of synthetic enamel paint with matt finish from following of approved make, colour & shade on newly dry interior plastered surface at all heights give an even shade, including required coats (minimum two coats) white cement based putty of Birla white / Acrylic putty of Asian paint or equivalent after thoroughly brushing the surfaces free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth etc. after applying every coat of putty. Priming coat of alkali resistant cement primer (water or solvent based) is to be applied on putty etc. complete as directed by engineer-in-charge. Sample to be approved before starting of the work. The rates shall include the cost of filler for filling the cracks on surface.

Providing and applying anti algal weather proof Apex 100% Acrylic exterior paint of approved make & shade to the plastered, exposed brick, stone and concrete surface in two coats. Including preparation of the surface like holes,dents and cracks to be filled only by using mixture of white cement and fine sand(in the ratio 1:3), applying a exterior wall primer(X2) two coat , scaffolding , curing, cleaning at all levels and locations etc. complete.The dry/wet cleaning of floors/pipes/glass etc. after painting is to be carried out, protection of surfaces before painting is included in the item.

Providing and laying first quality vitrified tiles of desired finish, pattern, colour, size and make Finishing should be done with flush pointing in Tile Epoxy and pigment with residue and skirting, including curing, polishing and cleaning with mild oxalic acid etc. complete for all floors / all levels, as shown and specified, for flooring, or channel work etc. complete, for all floors / all levels / all heights and all as per specifications and direction of Engineer-in-charge. The rate should be inclusive of protection of flooring until the handling of the project by covering the joints with abrotaps, plastic sheet and Plaster of Paris. The rate shall include cost of 25mm cement mortar and 20mm wired finish screed. Basic Rate 800 Rs/Sqm

Providing and laying first quality glazed tiles of approved colour, make and size in floor & dado works. The tiles shall be fixed, after applying cement slurry (3.3 kg. cement / Sqm), with 1:1 cement fine sand mortar (butter to tiles) in dado on minimum 12 mm thick wired plaster in CM 1:3 in line level & as per drawings /specification and / or directed by Engineer in Charge. Joints shall be filled with white cement and matching approved pigment including curing, and cleaning with mild oxalic acid etc. complete at all floors / all levels / all height etc. complete. The sizes that can be used are up to 300mm X 600mm X 8 mm thick. The rate shall be inclusive of the cost of 12mm thick wired plaster.

Providing & fixing mirror/leather finish polished Granite Stone of average 20 mm. thick of uniform size and colour for kitchen platform, staircases, mid landings sinks, shelves,partition,morry,staircases skirting etc. in floor, dado or facia etc. from 1.0m. to 1.5m long, including necessary machine-cut edges (uniform thickness) rounded edges, nosing of grooves necessary cement mortar bedding in CM 1:3 of required thickness., average 20 mm. Cement joints and pointing as specified with polishing (with oxalic acid), curing, daily mopping with water and kerosene as directed for at least 15 days or up to the satisfaction of the Architect & Engineer-in-charge etc. complete.

Providing and laying Granite Stone mirror polish of average 20mm thik over Window frame and door frame with Cement Mortar 1:3 including rounding on inner side. For Main Door frame Double stone to be provided.

Providing and fixing superior quality factory made single or double leaf Phenol Bonded solid core flush door shutters commercial type hot pressed conforming to IS:2202 (Part I,II) 1991 including 12 mm thk teak wood lipping all around with one coat of primer, putty and 2 coats of synthetic enamel paint on both faces etc. complete as directed by Engineer. (inclusing Hinges, aldrop & standard door hardware)

Providing and fixing of factory made Pvc doors with all required fittings to be completed as per instruction of Engineer in charge.

Providing and fixing in position Silver gray matt finish anodised (15 microns) aluminium glazed sliding windows of approved make using 4mm thick rattle proof plain glass panels fixed to shutter by means of Neoprene rubber beading or equivalent PVC beading including silver gray matt finish outer frame, all necessary fixtures, fastenings, locking devices, PVC weathering strips, nylon gliders, etc. complete as per drawings, specifications and as directed by the Engineer. The rate shall includes supplying and fixing on site and putting the glazed sliding windows in operation and including providing 6 mm groove all around and seiling the same from both the faces with silicon base sealent. All visible and flush type of locking devices shall be made of silver gray matt finish anodised aluminium.

Providing and fixing in position silver gray matt finish anodised (15 microns) aluminium ventilators with staggered glazing using rectangular tube section with single or double groove section of approved manufacturer including distance pieces, 4mm thick plain glass panels, aluminium glazing clips, fixing 25 x 25 x 10mm gauge GI bird mesh 100mm wide between the staggered gap with aluminium angle frame 25 x 25 x 5mm and 20 x 3mm flat, necessary fixtures and fastenings etc. complete as per client

Providing, laying, testing and commissioning CPVC SDR-11 pipe 25 mm dia complete with fittings, clamps, cutting and making good walls for internal cold water supply lines.

Providing, laying, testing and commissioning CPVC SDR-11 pipe 32 mm dia complete.

Providing and fixing SS kitchen sink 610x450 mm with waste coupling.

Providing and fixing vitreous china wash basin with pillar cock and waste coupling.

Providing and fixing European water closet complete with flush tank and seat cover.

Providing and fixing health faucet with CP tube.

Providing and fixing approved make chromium plated brass wall mixer (hot and cold water) with overhead shower arrangement, consisting of wall mixer body, hot and cold operating handles, shower arm of 300 mm length, overhead shower of 100 mm dia, wall flanges, concealed/exposed fittings, all necessary connections and accessories complete, including testing, commissioning and making good the damaged surfaces complete as directed by the Engineer-in-Charge.

Providing and fixing bib cock 15 mm dia.

Providing and laying SWR soil pipe 110 mm dia including fittings.

Providing and laying SWR waste pipe 75 mm dia including fittings.

Providing and laying SWR waste pipe 50 mm dia including fittings.

Providing and fixing floor trap with SS grating.

Providing and fixing nahani trap.

Providing and laying external underground HDPE drainage pipe 200 mm dia.

Constructing inspection chamber 600x600 mm with ci cover complete.

Providing, laying, testing and commissioning complete point wiring in surface mounted heavy duty rigid PVC conduit using FRLS copper conductor of suitable size including modular switches, sockets, fan regulators, switch boxes, junction boxes, saddles, bends, accessories, earthing conductor, fixing hardware and all necessary materials complete as required. Approximate Includes 170 Light Points, 48 Fan Points, 119 Nos. 6A Socket Points, 65 Nos. 16A Power Points, 16 Bell Points, 16 TV Points and 16 Intercom Points.

Supply, installation, testing and commissioning of all internal lighting fixtures including LED batten fittings, LED ceiling lights, balcony lights, bathroom lights and all accessories complete.

Supply, installation, testing and commissioning of ceiling fans complete with electronic regulators, mounting accessories and wiring connections.

Supply, installation, testing and commissioning of common area lighting fixtures including staircase lighting, passage lighting, stair cabin lighting, terrace lighting and external building lighting complete.

Providing and fixing SPN Distribution Board complete with MCBs, RCCB, neutral link, earth bar and accessories.

Providing and fixing Common Area Distribution Board complete with MCBs, RCCB and accessories.

Providing and installing complete earthing system consisting of GI pipe electrode, earth chamber, GI strip, earth wire and accessories complete.

Breaking of R.C.C. or P.C.C. at any level including cutting of existing reinforcement bars, shifting of debris from factory premises to outside as directed by Engineer-in-Charge.

Breaking of Brick masonry of any thickness including the finishing over the masonry surface. The rate shall include the shifting of debris from factory premises to outside the factory premises as directed by Engineer-in-Charge.

Providing, drilling & fixing anchor bars in concrete using Hilti HY-150 chemical grout as per as per manufacturer's specifications.

Providing and fixing anchor fasteners of approved make including chemical drilling hole in RCC, finishing the surface etc complete as per the instructions of Engineer-in-Charge.(BY HILTY/FISHER MAKE)

Supply of Manpower including tools & Tackles as required by EIC

Supply of Machinery as required including operator, fuel etc

Providing fabricating, welding Steel Work

Description

Excavation in all types of Soil

Up to 1.50 mtr. Depth

From 1.50 mtr. to 3.00 mtr. Depth

From 1.50 mtr. to 3.00 mtr. Depth Soft Rock

From 1.50 mtr. to 3.00 mtr. Depth Hard Rock

Backfilling in foundation with approved materials

Approved Good quality Earth brought from Outside

Sand (2.6 to 2.8 F.M.) brought from Outside

Filling in plinth with approved material

Approved Good quality Earth brought from Outside

Sand (2.6 to 2.8 F.M.) brought from Outside

Dry Stone Metal Soling - 230 mm thk.

Antitermite Treatment.

Surface Cutting

Empty Boring

350mm Dia

P.C.C. in Foundation and Floor

R.C.C M30 for Piles with Tremie

R.C.C. M:25 by batching Plant

For Foundation and up to Plinth lvl.

For Superstructure up to 3.050 mtr.

- Do - but from 3.050 to 6.10 mtr. Height

- Do - but from 6.10 to 9.15 mtr. Height

- Do - but from 9.15 to 12.075 mtr. Height

Reinforcement

Mild Steel Bars.

High Strength Deformed Bars.

TMT Bars

Form work / Shuttering

For Foundation and up to Plinth lvl.

-Do- upto 3.05 Mtr Ht

- Do - but from 3.05 to 6.10 mtr Ht

- Do - but from 6.10 to 9.15 mtr. Height

- Do - but from 9.15 to 12.075 mtr. Height

Precast Reinforced Cement Slab - R.C.C. M:25

Water Proofing admixture in Liquid form.

Free Flow Non-Shrink Grout. (FOSROC GP-2)

25mm thick Premoulded compressible foam for expansion joint filler.

Expansion Joint filler.

Expansion Joint Cover.

Staging for Direct Ht

Brick Masonary C.M. 1:6 for fdn. and plinth

Brick mansonary in C.M. 1:6

Up to 3.00 mtr. Height(230MM THK.)

-Do- from 3.00 mtr to 6.00 mtr . Height(230MM THK.)

-Do- from 6.00 mtr to 9.00 mtr . Height(230MM THK.)

- Do - but from 9.00 to 12.00 mtr Ht(230MM THK.)

Parapet Wall (230MM THK.)

Brick Partition Wall - 115mm thk.

Extra over item no 1 & 2 for masonry in 1:4 Cement mortar instead of 1:6

Hot Rolled Steel Structure

Fully Welded Structure

Erection incl. Alignment

Applying First Coat Oil Paint

Applying Second Coat Oil Paint

RHS / SHS - TISCO Tube Structure

Fully Welded Structure

Erection incl. Alignment

Applying First Coat Oil Paint

Applying Second Coat Oil Paint

Sag Roads

Foundation Bolts

Cold Rolled Steel Structure

0.65 mm. thk. Galvalume Color coated plain sheets for accessories

Below 150mm size

150mm to 250mm size

250mm to 650mm size

North Light Curve

Apron Piece

0.47mm thk. Bare Galvalume Sheets for roofing

0.47mm thk. Galvalume Color Coated Sheets Cladding

4mm Thk Aluminium Foil Insulation

Armstrong Acoustical Mineral Fiber False Ceiling-1210 x 610

- Do - but for 610 x 610mm - Bottom Laminated

- Do - but for 610 x 610mm - Both Side Laminated

G.I. Rain Water Gutter

Rain Water Down Take pipe (P.V.C.)

90mm. Dia.

110mm. Dia.

125mm. Dia.

160mm. Dia.

180mm. Dia.

Streamline ridge Ventilators

P & F Translucent Roof light sheets 2mm thick plycarbonate corugated

Air vent turbine - VERGOLA Ventilator

Model - AV 600

Box type Door Frame 125mm x 60mm - Pressed Steel Sheets(1-BLOCK-3FLOOR)(D01)

Fully Glazed Aluminum Door

35mm thick laminated flush door shutter

Aluminum Anodised frame Window.

Fully Glazed Fixed type.

- Do - but sliding type 50% opening.

Fully glazed Fixed type but fixed glass strips louvers

Fully glazed Fixed type but Adjustable glass strips louvers

Openable type shutters

Supplying, providing and fixing of Float glass

4mm thick

5.5 to 6mm thick

8mm thick

10mm thick

12mm thick

Extra over Item No. 5 for Toughening of Glass.

4mm thick

5.5 to 6mm thick

8mm thick

10mm thick

12mm thick

Extra over Item No. 5 for Frosting of Glass of any thick

Extra over Item No. 2, 4 and 11 for

Extra for Powder Coating

Extra for Color Anodizing.

Hydraulic Door Closer

Plastic section Doors of Syntex

Aluminum Frame Door partially galzed and partially laminated board panel

Supplying, providing and fixing 10mm thick laminated board.

Rolling Shutter - 18 gauge thickness

- Do - with gear arrangement.

- Do - without gear arrangement.

- Do - but with 100% Grill type with gear arrangement.

- Do - but with 100% Grill type without gear arrangement.

- Do - but with 25% of the area to be Grill type with gear arrangement

Extra for providing motorized system to

Sliding Door

Rolling Shutter

Aluminium Windows with Double Glass (Domal-40 series)

Providing and fixing Acoustics Partitions

Fire Proof Door

20 mm thk. water proof cement plaster.

12 mm thk. Cement Plaster to all surface

12 mm thk. Cement Plaster to all surface

From plinth to 3.00 mtr. Height

From 3.0 mtr. to 6.0 mtr. Height

From 6.0 mtr. to 9.0 mtr. Height

From 9.0 mtr. to 12.0 mtr. Height

Double coat Sand Faced Plaster

6mm thk. Cement Plaster over all R.C.C. Work

Extra over Item no 2 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm

Extra over Item no 3 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm

Cement Paint

Acrylic Distemper

Oil bound distemper

Weather seal coat exterior quality paint

Texturised matt finished paint

Acrylic emulsion (Matt & glossy) Paint

lime white wash

Providing and Laying Granolithic Floor

40mm thick. Granolithic floor. (With out vacuum dewatering )

50mm thick. Granolithic floor. (With out vacuum dewatering)

75mm thick. Granolithic floor. (With vacuum dewatering)

100mm thick. Granolithic floor. (With vacuum dewatering)

125mm thick. Granolithic floor. (With vacuum dewatering)

150mm thick. Granolithic floor (With vacuum dewatering)

Non Metallic floor Hardner

Ashford Formula Floor treatment

Polyproplylene fibrous reinforcement

Expansion Joints in the Floor

Reinforcement Bars for Flooring

Mild Steel Bars

H.Y.S.D. Bars (T.M.T. Tor Steel)

3.175mm (10 gauge) 50mm x 50mm weld mesh

Prefabricated cold rolled welded wire fabric

Isolation Joints

White Glazed Ceramic Tiles - 6mm thk.

TOTAL FLOOR(1 BLOCK-3 FLOOR)

In Dado(ROOM WALL

Extra for Colored Ceramic Tiles

In Floors

In Dado

Extra for Matt finish Colored tiles

In Floors

In Dado

Polished Kota Stone Flooring - 30 to 40mm thk.(1BLOCK-3 FLOOR)

Polished Kotah Stone Flooring - 25 to 30mm thk.

Polished Kota Stone 100mm high Skirting fixing by Mortar

Polished Kota Stone 100mm high Skirting fixing by Adhesiv

P.V.C. Vinyl Flooring - 3 mm thk. Anti static

Marble Flooring

Makrana white marble.

For Udaipur / Kesariaji green marble.

Makrana white marble Skirting

For Udaipur / Kesariaji green marble Skirting

20mm thick Acid resistance tiles

False Flooring

250 micron PVC Sheet

Minimum 10mm thick Vetrified Tiles in floor with 100mm Skirting

Polish Kota stone for Staircase and Window Sill

Marble for Staircase and Window Sill

Stone Cladding

Nimbaheda Rough Stone

8 to 10mm thick Polish Granite

Red Agra Stone

2 mm thk.Self leveling Epoxy Coating

P.C.C. Fillet

100 x 100mm size

150 x 150mm size

100mm thk. Partition with Double Gyp. Board on each face.

G.I. Expanded Chain link Jali

DORMA Door

Breaking of R.C.C. at all levels & Pile Head

Breaking of Brickwork and shifting of debris at all levels

100mm thk. Partition with Single Gyp. Board on each face.

Making & Finishing Openings of any size

Making corner fillet 25 x 25mm size in Epoxy modified polymer mortar.

Fixing 450mm dia. Exhaust fan

Fixing 300mm dia. Exhaust fan.

Fixing 250mm dia. Exhaust fan.

India Type waterproofing

Red Agra Stone Paving.

P & E Structural glazing

1800 mm high Barbed Wire Fencing

Dumbble Type PVC Water Stopper

Providing and Fixing Aluminum Composite Panel

Total thickness 2.0mm

Total thickness 4.0mm

75mm thick Precast M30 Grade Concrete Paver Block

Aluminum Nosing angle

3mm thick APP & SBS Polymeric Water Proofing Membbrane

G.I. "B'' Class Pipe Nozzle with Puddle Flange

150mm dia x 1000mm Long.

200mm dia x 1000mm Long.

300mm dia x 1000mm Long.

G.I.Pre painted Sheets Partition

2mm thick Polythene or Tarpaulin sheet curtain wall

Perforated Pipe P.V.C. 225mm dia

Pebble Filling as Filter media for Rain Harvesting

40mm to 65mm

20mm to 30mm

Existing Structure Roof sheet & Wall sheet Removing & Staking

Existing Steel Structure Member Remove & Stacking

Providing and fixing Rebaring

8mm Bars

10mm Bars

12mm Bars

16mm Bars

Providing and fixing Anchor Fastner

10mm Bars

12mm Bars

16mm Bars

20mm Bars

M.S Gate

Modular merino toilet partition

White China Water Closet (India type)

White China Water Closet (Orissa type)

White China Water Closet Universal (Anglo Indian) Type

White China Water Closet European Floor mounting type.

White China Water Closet European wall Hung type.

Extra for Colured Wall hung European W.C.

Wash Basin

Stainless Steel Sink

Wall Mixer

Shower rose with Arm

Wash Basin Mixer Center Hole

Senso Urinal

Flat Back Large Urinal

Single urinal

Two urinal Set

Three Urinal Set

Marble Partition 1200 x 650

Bib Tap

In Bathroom (Cat.no.107)

In Hand Wash area Taps

Toilet Paper Holder

Mirror

C.P.Brass Towel Rail

Liquid Soap Container

P/F PVC Soil, waste and vent Pipe

150 mm Dia. PVC Soil Pipe.

100 mm Dia. PVC Iron Soil Pipe.

75 mm Dia. PVC Pipe.

PVC Floor Trap 100 mm INLET & 100mm dia. OUTLET

P.C.C. 1:2:4 around Pipe

150 mm Dia. PVC Pipe.

100 mm Dia. PVC Pipe.

75 mm Dia. PVC Soil Pipe.

Painting of G. I. Pipes with 2 coats of bitumastic paint

15 mm dia nominal bore.

20 mm dia nominal bore.

25 mm dia nominal bore.

40 mm dia nominal bore

50 mm dia nominal bore

75 mm dia. nominal bore.

100 mm dia. nominal bore.

P/F of UPVC Pipes including all fittings

15 mm dia. Nominal Bore

20 mm dia. Nominal Bore

25 mm dia. Nominal Bore

40 mm dia. Nominal Bore

50 mm dia. Nominal Bore

75 mm dia. Nominal Bore

100 mm dia. Nominal Bore

P/F Brass Full Way Valve with wheel tested on 20 kg/sqm

15 mm dia. Nominal Bore

20 mm dia. Nominal Bore

25 mm dia. Nominal Bore

40 mm dia. Nominal Bore

50 mm dia. Nominal Bore

75 mm dia. Nominal Bore

100 mm dia. Nominal Bore

Sintex Water Tank

500 ltr. Capacity Tank

1000 ltr. Capacity Tank

2000 ltr. Capacity Tank

5000 ltr. Capacity Tank

Stoneware pipe 1.50 mtr. Deep

150 mm dia. S.W. pipe

230 mm dia. S.W. pipe

300 mm dia. S.W. pipe

- Do - but below 1.50 mtr. To 3.00 mtr. Depth

150 mm dia. S.W. pipe

230 mm dia. S.W. pipe

300 mm dia. S.W. pipe

PVC Pipes of 6 Kg. / Sq.M. - 1.50 mtr. Deep

160 mm dia. P.V.C. pipe

225 mm dia. P.V.C. pipe

315mm dia P.V.C. Pipe

PVC Pipes of 6 Kg. / Sq.M. - 1.5 mtr. To 3.00 mtr. Depth

160 mm dia. P.V.C. pipe

225 mm dia. P.V.C. pipe

315mm dia P.V.C. Pipe

Stone ware Gully trap

Manhole Chamber up to 1.50 mtr. Depth

Extra over above Item for Additional Depth

P / F of C.I. rungs

P / F Double seal C.I. manhole cover of size 600mmx600mmx100mm

Constructing of Honeycomb brick mashonry

Filling the angular shape brick bats.

M.S. Plate Cover

Sub grade preparation incl. Excavation and Rolling

Yellow soil filling in layers

335mm thick Granular Sub Base

200mm thick Water Bound Maccadam

60mm thick Binder course

25mm thk. Wearing Course

Seal Coat

L Shape Pre cast R.C.C. M25 Kerbing

Oil Paint to Kerbing Stone

Interlocking coloured Concr. Block 200 x 100 x 40

P/L N.P.3 Class Hume Pipes

200mm dia.

300mm dia.

450mm dia.

600mm dia.

750mm dia.

900mm dia.

Cast in situ Paving with Grass Slot

2mm Thick Thermoplastic Paint

150mm thick Concrete Panel

Area grading in all types of soil including excavation upto 1.50 mtr. depth

Approved Good quality Earth brought from Outside