Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹33.9 LAccepted-AOC | 1 | Accepted-AOC L1 BIDDER | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 BIDDER |
| Sl No | Description | Qty | Unit | SKYHIGH BUILDERS L2 | MAS CONSTRUCTIONS L1 |
|---|---|---|---|---|---|
| 1.00Maintenance | |||||
| 1.00 | OD273562/2025-2026:Engaging labour for cleaning | 12 | Day | 1,114.65 ₹13,375.8 | 1,082.18 ₹12,986.16 Lowest |
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.86 | cum | 370.51 ₹689.15 | 359.72 ₹669.08 Lowest |
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 18 | sqm | 397.74 ₹7,159.32 | 386.16 ₹6,950.88 Lowest |
| 1.00 | 4.4.1:Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 3.21 | cum | 10,053.64 ₹32,272.18 | 9,760.82 ₹31,332.23 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 432 | kg | 192.66 ₹83,229.12 | 187.05 ₹80,805.6 Lowest |
| 1.01 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 3,510 | kg | 200.1 ₹7,02,351 | 194.27 ₹6,81,887.7 Lowest |
| 1.01 | OD315651/2025-2026:Providing and fixing Aluminium profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.460 mm or nearest available thickness. The sheet shall be fixed using
self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. OD71/21-22 (Approved data vide CE circular dated 18.08.2016) | 450 | sqm | 818.2 ₹3,68,190 | 794.37 ₹3,57,466.5 Lowest |
| 1.01 | OD335468/2025-2026:Providing and fixing Aluminium sheet roofing for ridges 0.50 mm (+ 0.05%) coating using self
drilling/self tapping screws complete:
Ridges plain (500-600 mm) | 15 | 1 meter | 547.76 ₹8,216.4 | 531.81 ₹7,977.15 Lowest |
| 1.01 | OD273563/2025-2026:od1295269/2021_2022 :Providing and fixing 200 mm wide square uPVC rain water gutter
including all necessary fittings and making all necessary connnections complete as per the direction of
engineer in
charge at site
OD75/21-22 | 18 | metre | 516.55 ₹9,297.9 | 501.5 ₹9,027 Lowest |
Tender Value
₹33.9 L
EMD Value
₹50,000
Closing Date
23 Oct 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ASSISTANT EXCECUTIVE ENGINEER
ASSISTANT EXCECUTIVE ENGINEER, EDAPALLY ZONAL OFFICE
EYE1-4248140-2025- Sheet Roofing and Tile Laying infront of RRF Building in Division - 40-2025-26-General Civil Work
2025_LSGD_810542_7
EYE2/7600/22
Open Tender
Civil Works - Buildings
Item Rate
180 days
EDAPALLY ZONAL OFFICE
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,950
₹50,000
Yes
5 Mar 2026
17 Oct 2025
24 Oct 2025
17 Oct 2025
23 Oct 2025
17 Oct 2025
Amount
Maintenance
OD273562/2025-2026:Engaging labour for cleaning
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
4.4.1:Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD315651/2025-2026:Providing and fixing Aluminium profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.460 mm or nearest available thickness. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. OD71/21-22 (Approved data vide CE circular dated 18.08.2016)
OD335468/2025-2026:Providing and fixing Aluminium sheet roofing for ridges 0.50 mm (+ 0.05%) coating using self drilling/self tapping screws complete: Ridges plain (500-600 mm)
OD273563/2025-2026:od1295269/2021_2022 :Providing and fixing 200 mm wide square uPVC rain water gutter including all necessary fittings and making all necessary connnections complete as per the direction of engineer in charge at site OD75/21-22
50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
16.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30
OD315724/2025-2026:(MD) Providing and laying of interlocking concrete Block pavements using 80 mm M40 Hydraulic blocks of approved size,design & shape laid in required pattern over and including a compacted bed of 6 mm stone aggregate of 50 mm average thickness , etc . all complete as per the direction of Engineer- in-charge.
OD274736/2025-2026:Engaging Fitter
50.18.9.16.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
SKYHIGH BUILDERS (BID ID -2406041)
Bidder Name
MAS CONSTRUCTIONS
SKYHIGH BUILDERS
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.25 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
Tendernotice_4.pdf
PDF • 0.25 MB
Tendernotice_5.pdf
PDF • 0.27 MB
Tendernotice_6.pdf
PDF • 0.98 MB
Tendernotice_7.pdf
PDF • 0.52 MB
BOQ_1353570.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .