Maintenance of 33KV Incoming lines from 220 KV Sub-Station Dohna to 400 KV Sub-Station Bareilly for Staion Supply at 400 KV Sub-Station Bareilly

Amount

Patrolling of following 33 KV Incoming Lines from 220 Kv Sub-Station Dohna to 400 KV Sub-Station Bareilly for Staion Supply at 400 KV Sub-Station Bareilly and Providing of Patrolling Report

Patrolling of 33 KV Line from 220 KV Sub- Station Dohna to 400 KV Sub-Staion Bareilly (3.75 Km x 12 Job= 45km Length)

Patrolling of 33 KV Line from Tapping Point of 33 Kv Dohna (132 Kv S/S Dohna) - Nawab Ganj (33KvS/S) Line to 400 Kv Sub-Station Bareilly (1.0 Km Length x12 Job=12.0Km)

Periodic Lopping & Copping of Branches of different types of Trees like Mango, Neem, Sheesham, Peepal Semal Eucalyuptus,Popular etc. Falling in corridor of the above said 33 kv line to provide safe Electrical clearance between Trees & Conductors on both sides of line with all due care and safety & precautions to avoid any damage to near by Buildings, Power & Telephone lines passing nearby Trees etc. The work also includes Removing, Eliminating & cleaning the line sites after Lopping & Chopping of the Trees during the Period of 12 Month

Restringing of Loose Sagged Conductors, if found Loose.

Providing of Cable outdoor End Jointing Kit alongwith cable Jointing work,whenever required. (01 Job per cable outdoor end jointing kit)

Providing of Cable Straight Through Jointing Kit alongwith cable Jointing work,whenever required. (01 Job per cable Straight Through jointing kit)

Replacement of damaged 33 KV Tension Disc Insulator / Insulator String by new Disc insulator to be provided by the Deppartment free of cost as per requirement (01 Job per Tension Insulator String)

Replacement of damaged 33 KV Pin Insulator by new Pin Insulator to be provoded by the contractor as per requirement (01 Job per Pin insulator)

Replacement of damaged Pin of 33 KV Pin Insulator by new Pin of 33 KV Pin Insulator to be Suppied by the contractor as per requirement (01 Job per Pin)

Replacement of damaged P.G clamp (ACSR Dog to Dog conductor) by new ones to be Suppied by the contractor as per requirement (01 Job per P.G clamp)

Tightening of Jumper /Clamp including replacement of damaged Bolts- Nuts Washers, if any bt new ones to be provided by the Deppartment free of cost as per requirement (01 Job per Jumper/ clamp)

Replacement of damaged Jumper by ones whenever Snapping occurs. The location of Snapped Jumper will be informed by the Supervising Engineer (01 Job per Jumper)

Attending Break-down of conductor due to Snapping of conductor due to damaged of conductor / Tension Insulator String, whenever Snapping occurs. The location of Snapped Jumper will be informed by the Supervising Engineer (01 Job per Conductor)

Bharat Trading Corporation

EMC Associates