Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹50 LAccepted-AOC | 1 | Accepted-AOC l1 | |
| 2 | Not Admitted-Finance | - | Not Admitted-Finance Not qualified for AOC | |
| 3 | Not Admitted-Finance | - | Not Admitted-Finance Not qualified for AOC |
Tender Value
₹55 L
EMD Value
₹1.1 L
Closing Date
29 Jul 2019, 9:00 amClosed
MANAGING DIRECTOR
THE SHAHABAD COOPERATIVE SUGAR MILLS LTD SHAHABAD MARKANDA
VARIOUS DISMANTLING, FABRICATION AND ERECTION JOBS
2019_HBC_88485_1
SCSM-7-19/71
Open Tender
Miscellaneous Services
Works
shahabad markanda
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Yes
Shahbad Coop. Sugar Mill
₹1.1 L
Yes
15 Jan 2021
22 Jul 2019
29 Jul 2019
22 Jul 2019
29 Jul 2019
22 Jul 2019
22 Jul 2019 - 27 Jul 2019
Amount
Dismantling, fabrication & erection of M.S. Plate job (Tank, Slurry Tank, , Gutter, structure, plate farm any Thickness plate:-
Dismantling.
Fabrication.
Erection.
Dismantling, fabrication & erection of M.S. & G.I. pipeline (all sizes) : -
Dismantling.
Fabrication.
Erection.
Dismantling, fabrication & erection of M.S. pipe accessories above 12’’:- (Bend, reducer, flanges, blind, nipple, tee etc.)
Dismantling.
Fabrication.
Erection.
Strengthening of any equipment
Fabrication.
Erection.
Dismantling, fabrication & erection of pipe accessories (Bend, reducer, flanges, blind, nipple, tee etc.)
Dismantling.
Fabrication.
Erection.
Dismantling & erection of Seamless pipeline (all sizes) :-
Dismantling.
Fabrication.
Erection.
Dismantling, fabrication & erection of Seamless pipe accessories: - (Bend, reducer, flanges, blind, nipple, tee etc.)
Dismantling.
Fabrication.
Erection.
Dismantling, fabrication & erection of S.S. pipe accessories: - (Bend, reducer, flanges, blind, nipple, tee etc.)
Dismantling.
Fabrication.
Erection.
Dismantling of valves( globe, sluice, angle valves & NRV):-
Up to 6” dia.
7” dia to 12” dia
Erection of valves( globe, sluice, angle valves & NRV): -
Up to 6” dia.
7” dia to 12” dia
Dismantling, fabrication & erection of railing:-
Dismantling.
Fabrication & Erection
Dismantling & Erection of C.I. pipe:-
Dismantling.
Erection
Dismantling, fabrication & Erection of S.S. Pipe
Dismantling.
Fabrication.
Erection.
Taking-out old tubes & re-fitting of new Brass / S.S. tubes after necessary cleaning, painting of the Calandria & hydraulic testing. (contractor will arrange the tube expander) a) For J.H. & Dynamic Juice Heater & V.L.J.H.
Removal of old tubes
Fitting of new tubes.
Old tube fitting after necessary repair.
For Pan.
Removal of old tubes
Fitting of new tubes.
Old tube fitting after necessary repair.
For Semi-kestner (New).
Removal of old tubes
Fitting of new tubes.
Old tube fitting after necessary repair.
For Quad Body.
Removal of old tubes.
Fitting of new tubes.
Vapour Cell 1550 m2 & 2400m2
Removal of old tubes.
Fitting of new tubes.
Dismantling, fabrication & erection of cone up to 10mm plate (different sizes): -
Dismantling.
Fabrication.
Erection.
Dismantling & erection of Runners of various chains: -
Dismantling.
Erection.
Dismantling, Fab. & Erection of side plates of cane carriers, Bagasse Carrier from 4” to 8” height: -
Dismantling.
Fabrication.
Erection.
Dismantling & erection of S.S. sheeting of Rake Elevator & Inner Carrier trough & lining at side plate of Fibrizer & Leveller.
Dismantling
Erection.
Dismantling, fabrication & erection of M.S. Pipe (along with Vapour Pipe) above 14” dia of any thickness and of any length (above 14 mtr. Height): -
Dismantling.
Fabrication.
Erection.
Dismantling, fabrication & erection of M.S. Pipe (along with Vapour Pipe) above 14” dia of any thickness and of any length (above 14 mtr. Height): -
Dismantling.
Fabrication.
Erection.
Dismantling & Erection of bottom soccer after replacement of tube along with platform and Terminal connection: -
Quad body.
Pans 85 Ton.
Pan 40 Ton
Vapour cell
Semi-kestner
Evaporator body
Dismantling & erection of top cover of new Semi-kestner along with platform and terminal connection
Dismantling, fabrication & erection of undernoted jobs:-
Dismantling, fabrication & erection of Savealls internal pipe bottom plate & top plate of 85 Ton Pans.
Dismantling, fabrication & erection of Top Cone of 40 Ton Pans
Dismantling and erection of 85 Ton Pan saveall
Dismantling, fabrication & erection of Savealls internal pipe bottom plate & top plate of 60 Ton Pans.
Dismantling, overhauling & fitting of M. S. Angle valves & Globe valves at its site after replacement of its worn out parts: -
Size: - 300mm
Size: - 400mm
Size: - 500mm
Size: - 600mm
Size: - 700mm
Size: - 800mm
Size: - 900mm
Size: - 1000mm
Size: - 1300 mm
Replacement of worn out down take of 40 Ton, 60 Ton & 85 Ton Pan
Dismantling.
Fabrication.
Erection.
Replacement of down take of 440 Sqm., 560 Sqm & 750 Sqm. 1100,1200,1400 Quad body & Vapour Cell etc.
Dismantling.
Fabrication.
Erection.
Dismantling & erection of PVC pipe, Nozzle, main PVC header 8” pipeline 4’’, threaded coupler 2’’, five way header of Main Spray Pond & Mini Spray Pond.
Dismantling & erection of M.S. fabricated Angle & Globe valves: -
Size :- 1300mm
Size :- 1000mm
Size :- 900mm
Size :- 800mm
Size :- 700mm
Size :- 600mm
Size :- 500mm
Size :- 400mm
Dismantling, fabrication & erection of distribution plate of 10mm thick of 40 Ton Pan.
Dismantling & refitting of 3” M.S. Coil of Water Cooled Crystallizer with complete hydraulic test.
Dismantling, fabrication & erection of Internal Ammonia Coil of Quad & Pan make out from M.S. Pipe & bend (Pipe size 2” dia & 5” dia)
Dismantling, fabrication & erection of side channel along with S.S. plate work (inside on which rack moves) of Inter Carrier & MRC.
Dismantling, fabrication & erection of angle supports of Inter Carrier & mrc.
Dismantling, fabrication and erection of reducer above Condenser of Pan & Quads, size 900mm to 1300mm
Dismantling, fabrication & erection of boot for Inter Rack carrier & MRC
Dismantling, fabrication & erection of bagacillo cyclone made out of 3/5mm thick M.S. plate with its supporting structure and connections.
Dismantling, fabrication & erection of umbrella below Feed pipe of 85 Ton Pan & 60 Ton Pan.
Dismantling, fabrication & erection of window & round plate for Fiberizor header on cutter & Leveller made out of M.S. Plate with S.S. Plate lining.
Dismantling & erection of M.S. Square 2” of Cane Unloader & Mill House crane along with grinding work & straighten of M.S. Square
Welding and strengthening of rail section at long travel of cane unloader .
Dismantling, fabrication & erection of worn out internal & side M.S. plates of DSM screen.
Dismantling, fabrication & erection of Primary Cooler of Sulphur Furnace made out of 12” dia M.S. Seamless pipe.
Dismantling, fabrication & erection of Secondary cooler of Sulphur Furnace made out from M.S. Fabricated pipe.
Dismantling, fabrication & erection of internal coil & attached connections of Secondary cooler.
Re-welding of joints of exhaust /vapour pipe line from inside & outside.
Dismantling and erection of S.S. Screen of frame of Bagasse Elevator duct including dismantling & re-fitting of frame.
Dismantling, fabrication & erection of absorption tower of syrup Sulphitor along with connections made out from 12mm thick M.S. Plate.
Dismantling and errection of rotary juice screen including loading & unloading.
Dismantling, fabrication & erection of Flash Tank of Dorr along with connections made out from 8mm thick M.S. Plate
Dismantling, fabrication & erection of Primary & Secondary Clarifier Drum at E.T.P. along with connections made out from 12mm thick M.S. Plate
Dismantling erection of Juice Coils of Dorr along with connections
Fabrication of juice coil of Dorr made from M.S. pipe, M.S. Channel and M.S. Angle.
Dismantling, fabrication & erection of old semikestner worn out vapour gallery made out from 16 mm M.S. Plate.
Dismantling, fabrication & erection of catcher of pumps along with connections made out from fabricated pipe & M.S. Plate
Errection of Planetary gear box at any equipment after necessary dismantling & modification.
Dismantling, Fabrication & erection of bed frame for pump with motor & gear box made out from M.S. plate & channel.
Up to 15 HP
Above 15 HP to 30 HP
Above 30 HP
Dismantling, fabrication & erection of hood, window & side plates of head on cutter with M.S. plate with S.S. plate lining.
Dismantling, repairing & erection of bagasse extractor during off-season including hard facing. Quantity – 06 nos
Dismantling, repairing & erection of bagasse feeder screw conveyor during off-season including hard facing. Quantity – 06 nos
M.S. Fabrication & erection of skirting & covering of ash & bagasse belts conveyors
Dismantling of worn out trough portion & errection of new trough for ash screw conveyors of scroll size: dia 250 x 250 mm pitch & dia 300 x 300 mm pitch) at 125 TPH Boiler.
Dismantling, fabrication & erection of scrolls over 3” NB pipe for ash screw conveyors of 125 TPH Boiler. Scroll size : dia 250 x 250 mm pitch, dia 300 x 300 mm pitch, Material : MS-IS 2062, plate thickness : 5/6 mm
Dismantling & replacement of both worn out bearings of bagasse belt conveyer head / tail /snub /tensioner drums during season.
Dismantling & replacement of both worn out bearings of ash belt conveyer head / tail /snub /tensioner drums during season.
Dismantling, repairing of rotor, assembly & errection of rotary air lock valves of ESP, APH & water drum hoppers at 125 TPH boiler Quantity – 13 nos
Dismantling, fabrication & erection of MS expansion joints of bagasse feeder to furnace of 125 TPH Boiler. Quantity – 06 nos.
Dismantling, fabrication & erection of SS expansion Bellows from secondary air header after Air preheater to Boiler front & back tubes panel of 125 TPH Boiler. Size – 2”x 200 mm long. Quantity – 70 nos.
Dismantling, fabrication & erection of MS expansion joint of secondary air ducting (after air preheater) . Quantity – 03 nos.
Dismantling, Fabrication & erection of Expansion joint of flue gas ducting at inlet & outlet of economizer. Material – CRCA/SS, Plate size appx 1.6 mm thk x 382 mm wide x 24400 mm long (117 Kg/each). Quantity – 02 nos
Dismantling, Fabrication & erection of Expansion joint of flue gas ducting at ESP inlet & outlet. Material – CRCA/SS, Plate size appx 1.6 mm thk x 411 mm wide x 7392 mm long (38 Kg/Each). Quantity – 04 nos
Dismantling, Fabrication & erection of Expansion joint at inlet of ID fans. Material: CRCA/SS, Plate size appx 1.6 mm thk x 411 mm wide x 6826 mm long (36 Kg/each). Quantity – 02 nos
Dismantling, fabrication & erection of expansion joint at inlet of chimney. Material – CRCA/SS, Plate size appx 1.6 mm thk x 485 mm wide x 11694 mm long (72 Kg/each) – 01 no.
Dismantling, fabrication & erection of expansion joint from APH to plenum hopper. Material – MS, Plate size appx : 1.6 mm thk x 454 mm wide x 5160 mm long (30 Kg/each) – 02 no.
Dismantling of old worn out tubes, fitting of new tubes and expanding of tubes in top & bottom tube plates for APH. Tube size- 63.5 mm OD x 4000 mm long. Quantity – appx1000 nos
Dismantling of SS steam pipe along with its side supports, straitening of pipe & fitting of same of rotary soot blowers at 125 TPH boiler. Qty : 05 nos
Dismantling, fabrication, erection & hydraulic testing of coil made out from MS pipes & bends of heat exchanger at 125 TPH Boiler chimney.
Dismantling, modification & strengthening of bagasse carrier non drive end system along with strengthening of its base structure.
Dismantling, modification & strengthening of bagasse carrier drive end system along with strengthening of its base structure of motor , R.G. Box etc.
Dismantling, fabrication & erection of juice splashing system at mil made out from S.S. plate including connections.
Dismantling, fabrication & erection of bagacillo blower casing at mil made out from S.S. plate 5mm thick including connections. 02 nos.
Strengthening/ patching work of continuous C/F machine internal casing
Dismantling and installation, repairing and overhauling of lighting
Dismantling, fabrication & erection of discharge chute made out from M.S. & S.S. plate 5 mm / 8 mm thick including connections. 03 nos. (bagasse and rack carrier, fibrizer)
Dismantling, fabrication & erection of bagacillo line above blower casing at mill made out from S.S. plate 3/5mm.
Patching work of worn out portion any equipment.
Dismantling and re-erection of So2 Gas line seamless pipe 6” & 8” including valves.
Dismantling, Fabrication & erection of Ventury (3 mm S.S Plate) of new & old FBD- 02 nos.
Dismantling, fabrication and erection of hot water / steam jacket for NK 1503 Continuous centrifugal machine massecutie feed pipe.
Dismantling, repairs, overhauling and reassembly of sugar stacker chain, slates with wooden batten, structure, R,G, Box etc. complete
Dismantling, Fabrication & erection of supporting column cane carrier, made out from M.S. channel & plate.
Repairing of flexible shafts for cleaning of evaporator, pans & boilers.
Replacement of Teflon pad of rakes.
Fabrication & erection of plate at the sides of rake elevator, IRC, bagasse carriers, cane carrier & elevator.
Dismantling, & erection of air compressor of mill house size 9-½” x 7-½”
Dismantling, fabrication & erection of cross 6’’ made out of seamless pipe
Dismantling, fabrication & erection of cross 8’’ made out of seamless pipe
Dismantling, & erection of juice coil with cutover line, valves, Quad Body V. Sell & Semikestner after cleaning
Dismantling, Fabrication & Erection of washing coil inside for 85 , 60 Ton pan
Dismantling, fabrication &erection of sulphure melter with attached connections.
Dismantling, Fabrication &erection So2 furnace partition plate with M.S. plate
Dismantling, Fabrication &erection of juice box of double beat valve of Juice heater
Dismantling & erection of double beat valve 8” and 10”
Dismantling, Fabrication &erection of Umbrella of quad body.
Dismantling, Fabrication &erection of Umbrella of old semikestner .
Replacement of syrup sulphiter top plate with 12 mm thick M.S. Plate with connections.
Juice sulphiter work.
Dismantling, Fabrication & Erection of worn out / weak portion (Top Plate) including connections.
Dismantling, Fabrication & Erection of worn out / weak portion of shell including connections.
Dismantling, Fabrication & Erection of worn out / weak portion (Bottom Plate) (made out 12 mm Thick. M.S. Plate.)
Dismantling, Fabrication & Erection of receiving tower.
Syrup Sulphiter work.
Dismantling, Fabrication & Erection of worn out / weak portion (Top Plate) including connections.
Dismantling, Fabrication & Erection of worn out / weak portion of shell including connections.
Dismantling, Fabrication & Erection of worn out / weak portion (Bottom Plate) (made out 12 mm Thick. M.S. Plate.)
Dismantling, Fabrication & Erection of receiving tower.
Maintenance and cleaning of bagasse drying system during season.
Erection of spring support column for main steam pipe line near condenser of Power Turbine.
Dismantling, fabrication & erection of L.T. condensate tank plates.
Dismantling, Fabrication &erection of V- Cell catcher made out of M.S. Plate and angles.
Dismantling, Fabrication &erection of mud box of Door made out of M.S. Plate and angles with its connection.
Dismantling, Fabrication & erection of distribution plate of Door.
Fabrication of M.S. juice coil for S.K., V. Cell & Quad body.
Clamping of leaky pipe of any size. Clamp made out from M.S plate/pipe.
Welding of leaky pipe of any size.
Checking of all the carriers i.e. cane carrier, MRC, IRC, B.E. & Bagasse carrier Removal of link, slat, rakes including checking and bolts etc. during general cleaning
Dismantling, fabrication & erection of steam jacket of 85 ton pan.
Replacement of worn out side angle of cane carrier.
Dismantling, fabrication & erection of steam gallery of semi –kestner (old) made out from 16mm thick M.S. plate with extra supports.
Dismantling, fabrication and erection of worn out monitor casing M.S. top ring of continuous centrifugal machine
Strengthening & replacement worn out/weak portion of B&C sugar melter made out from M.S. plate 12/16 , angle, channel etc.
Dismantling, fabrication and erection of drive bed frame of sugar hopper with M.S. plate as per our Drawing / sample.
Dismantling & erection of hopper trough two meter wide.
Dismantling & erection of hopper trough (where connecting rod fitted) two meter wide.
Erection of new 1000 / 1400 m³/ hr capacity pump & motor along with bed frame & related connections with valves etc.
Dismantling of old 750m³/ hr &1450m³/ hr capacity pump & motor along with bed frame & related connections with valves etc.
Fabrication and erection of discharge chute with M.S. plate of continuous centrifugal machine
Dismantling, fabrication & erection arms & ribbons made out of M.S. plate 12 mm thick of crystallisers.
Repairing of steam bottom jacket of A pan.
Repairing / welding of any crack at tube plate of pans
Dismantling of old 200 Kg. of So2 furnace combustion chamber and erection of new along with related connections and melter.
Dismantling, fabrication and erection of guide plats for various chains ( i.e. bagasse elevator & Cane carrier)
Dismantling, fabrication and erection pinion / sprocket guard of Mill roller made out from 3/5 mm M.S. Thick plate
Shifting and fitting of mono block pump
Shifting and fitting of 6” high flow pump with motor
Shifting and fitting of motor
Arcing of Mill during season including made arrangement for same
Replacement of O.C. Filter agitator made from angle. channel and flats
Replacement of O.C. Filter tray with box made of S.S. / M.S. plate
Dismantling, fabrication and erection of O.C. filter light/heavy receiver bottle made from m. s. pipe M.S. Plate.
Dismantling, fabrication and erection of O.C. filter condenser made from M.S. Pipe & M.S. Plate.
Dismantling, fabrication and erection of O.C .filter condenser receiver made from M.S. Pipe & plate.
Dismantling, fabrication and erection of condensate box of J.H., Quad Body, V. Cell & S.K.
Dismantling, fabrication and erection of Mud scrapper of O.C. Filter.
Dismantling, fabrication and erection of Juice Sulphiter gas coil (perforated) 6’’&3’’ made from SS Pipe.
Dismantling, fabrication and erection of Syrup Sulphiter Internal gas coil made from SS/seamless pipe.
Replacement of worn out shell of Flocculation chamber of Clarifier (36’Dia) made from 8 mm thick M.S. Plate and M.S. Angle.
Dismantling, fabrication and erection of Juice weighing scale upper tank made from M.S. Plate, M.S. Channel and M.S. Angle.
Dismantling, fabrication and erection of Juice weighing scale tripping tank made from M.S. Plate, M.S. Channel and M.S. Angle.
Dismantling, fabrication and erection of water weighing scale upper tank made from M.S. Plate, M.S. Channel and M.S. Angle.
Dismantling, fabrication and erection of water weighing scale tripping tank made from M.S. Plate, M.S. Channel and M.S. Angle.
Dismantling of any juice, syrup, molasses and massecutie and re-erection of same at position after cleaning including valves. cleaning work is not scope of contractor) in
Dismantling and assembly of pipe, tank / any equipment accessories (M.S. / S.S.) i.e. flanges, bends, manhole duly fitted with bolts and jointing.
Dismantling
Assembly
Dismantling of 600 mm valve along with its reducer at exhaust pipe line and mounting of new 900 mm valve, matching flanges fabrication 900 mm dia and fitting on exhaust line.
Dismantling of old bed frame of IRC No. 1, Reduction Gear and motor fabrication of new bed frame made out from M.S. channel 200 x 75 & M.S. Plate and strengthening of its structure.
Modification of bed frame of IRC no. 3 motor according of new 50 HP motor
Fabrication of tilting chute assembly with 2 mm thick S.S. Plate for WIL 1250 & 1750 Batch Type Centrifugal Machine.
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .