COMPREHENSIVE REPAIR TO OUTER SURFACES OF BUILDING OF OLD MARRIED ACCOMMODATION OF JCOs AND OR AT SANJAY VIHAR IN NORTH ZONE UNDER GE (NORTH) BINNAGURI

Amount

M&L for complete removal of existing treatment of old decorated treatment on wall / ceiling / chajjas by scrapping with true care wall sander to make the surface free from dust, loose paints etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete including using putty/surface as required basis to address undulations and obtain smooth surface and applying Two or more coats of premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.

M & L for preparation of old treated surface of ceiling by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash / colour wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M & L for preparation of old surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper of any tint/shade with roller including wall putty / white cement wherever required to fill the wall cracks/holes complete all as specified and as directed.

M&L for complete removal of existing treatment of old decorated treatment on wall / ceiling / chajjas and applying waterproof cement based putty of average thickness 1 mm and sand papering surfaces to achieve smooth surfaces over surface on wall / ceiling / chajjas after preparation of surface and applying two coats of distemper acrylic of approved tint over a coat of alkaline resistant primer with roller including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M & L for preparation of old treated surface of walls by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash / colour wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enameled paint including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

Taking down cement plaster on brick work of any description including racking out joints and cleaning dust etc including removing rubbish material complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for applying average 15mm thick plaster in two layers (10+5mm) with ready-mix pre-packed proportioned dry mix mortar, blended with PP fibres, mixed with liquid water proofing compound @ 200ml/50 Kg Bag of cement or as per manufacturer's instruction on top layer on fair faces of brick wall or concrete surfaces additives on external surfaces including transporting of material, mixing, curing, scaffolding etc including finished even and fair without using extra cement complete all as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only.

M&L for 15mm thick rendering in cement mortar (1:4) in two layers (10+5mm) on fair faces of brick walls or concrete surfaces in mixed with water proofing compound @ 200ml/50 Kg Bag of cement or as per manufacturer instructions on top layer, finished even & fair without using extra cement all complete as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only.

Supply only liquid water proofing compound etc complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & fair without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash/ colour wash including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M&L for waterproof cement based putty of average thickness 1 mm and sand papering surfaces to achieve smooth surfaces over new plastered surface on wall / ceiling / chajjas after preparation of surface and applying two coats of distemper acrylic approved tint over a coat of alkaline resistant primer with roller including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M&L for preparation of new plastered surfaces on wall / ceiling / chajjas including using putty/surface as required basis to address undulations and obtain smooth surface and applying Two or more coats of premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coas of colour/white wash to match the colour of existing adjecent surface complete all as specified and as directed.

M&L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and as directed.

M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and as directed.

M&L for cutting and clearing away all grass, vegetation, saplings, shrubs, brushwood, undergrowth, toots etc from roof/wall for area n.exc 1 sqm each job and removing rubbish off the premises including applying approved root killer chemical like Herbicide etc as per manufacturer's instructions and making good disturbed portion if reqd with PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) finished exposed surface of concrete even and fair complete all as specified and as directed.

M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets, bed block, copings, filling concrete, gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height, in roof kerbs or mud stops, rounded or chamfered on edges, padding to roof etc including necessary form work and demolition/dismantling as required complete all as specified and as directed.

Tirupati Construction (BID ID -3174998)

BBKundu (BID ID -3172967)

SHRI MANOIRANJAN BISWAS (BID ID -3175284)

N K Construction (BID ID -3175078)

M/S SINHA ENTERPRISE (BID ID -3175122)

SINGH & CO (BID ID -3174901)

ANUP ENGINEERING WORKS (BID ID -3176225)

flexpro construction company (BID ID -3175542)

M/s Om Prakash Agarwala (BID ID -3174982)

Bidder Name

Tirupati Construction

R.MANJIT& CO