COMPRESSIVE MAINT TO OTM ACCN POCKET 7 UNDER AGE B/R-II GE ROORKEE

Amount

Dismantling timber scantling 40 sq cm & over in section, any position in unframed work complete all as specified and as directed.

M & L 2nd class hard wood in timbers scantling fixed in clean sawn complete all as specified and as directed.

M&L preparation surfaces of wood new or old of any description and girth not otherwise described and treated with creosote oil complete as specified and directed.

M&L for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm thick with pressed steel shutter 1mm thick Godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including MS hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs including spray including locking arrangement spray painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm (1:3) or PCC (1:2:4) type B-0 complete all as specified and directed.

S&F in repairs, 18mm thick plywood grade MDF Board, type BB fixed with screws for shelves, kitchen cupboard etc, to timber frame work or ply wood including 3mm thick teak wood lipping on edges any description fixed in any position with nails complete all as specified.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as directed.

M&L for pre-painted, galvalume aluminium zinc coating GI based corrugated sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa AZ-150, as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume zinc coated GI based plain sheet of any colour having tensile strength of 550 Mpa, AZ-150 fixed as in roof covering/ cladding to wall, ridges, valley gutter etc with self tapping screws complete all as specified and directed.

M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as in PCC Gola, hold fast cills/steps/coping etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

M&L for Steel tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to I.S.1161-1979 grade Fe-290 (Gde St-165 complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

M&L for Providing and fixing tiled false ceiling of designer tiles (high pressure steam Cured) of 4 mm thickness (as per IS:14862) of size 595x595mm and approved design in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick MS powder coated/GI sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick MS powder coated/GI sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ‘T’ runner to be suspended from ceiling using GI soffit cleats/by using dash fastners to RCC lintel or slabs/ by welding MS cleats of suitable size on truss/purlin/rafters” GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, at all heights as per directions complete all as specified and directed.

M&L for Providing & fixing false ceiling With fully perforated 12mm thick micro tegular edged or 1 0 mm thick square edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 Mtr length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.

All as per item no. 16 above but except brick complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) using coarse sand on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick (in two layer) rendering on wall/concrete surface with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 10 mm thick in cement (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 2mm thick wall care putty on wall over new/old plastered surface to prepare the surface even and smooth all as specified and as directed.

M&L for prepration of new wall surface and applying two coat OBD including primer all as specified and directed.

M&L for prepration of new wall surface and applying two Cement Base paint including primer all as specified and directed.

M&L for three coat of white wash on new surfaces (wall) including all prereration complete all as specified & directed

M&L for three coat of white wash on new surfaces of ceiling including all prereration complete all as specified & directed

M&L for preparation of old decorated surfaces (plastered/un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces inluding one mm thick cement base putty complete all as specified and directed.

Taking down old U/S wooden /steel chowkhat with shutter nexc 1.50 sqm each and removing from site complete all as specified and directed.

All as per item No. 30 above but exc 1.5 and nexc 4 sqm complete all as specified and directed.

Taking down old U/S shutters of any description exc 1 sqm and n.exc 2 Sqm each and removing from site complete all as specified and directed.

Taking down shutter from the frame of any discription n.exc 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including soap coat complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, towe bolt complete without gauzed bars, dovetailed or welded including soap coat complete all as specified and directed.

M&L for Steel ventileter with top hung shutters including projecting type hinges with MS handle and MS peg stay, including tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F mild steel framed work such as grills gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars barred iron doors, door chowkat, ladders; framed balusters, walk ways, railings, framework of water tanks, hold fast, sheet and similar work conforming to Fe-410-0 or Fe 310-0 complete all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed

S&F 30 mm thick Flush shutters, solid core construction, with blockboard core and plywoodface panels, commercial type on both sides is covered with decorative face veneer with lipping/frame to match complete all as spcified and directed

S&F factory made 35mm thick 2nd class hard wood glazed and skelton shutter (two or more panel) single or double leaf open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F MS Framed work as in doors or gates or chowkhat of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including of steel sheeting or other covering, running rails and guides and hanging; also fastening and fixing complete all as specified and directed.

S&F Stainless steel butt hinges 100 mm size, medium weight ,fixed with 8 nos stainless steel screws complete all as specified and directed.

S&F 150mm Stainless steel handles fabricated type bright finish having metal thickness 3 mm complete fixed with 4 Nos stainless stell screws complete all as specified and directed.

S&F 200 mm size Stainless steel barrel tower bolt, complete all as specified and directed.

S&F 300 mm size Stainless steel sliding door bolt, hasp & staple type with 16 mm dia rod, for use with Pad lock, with and including minimum 06 nuts and bolts, 4 on bolt plate and two on staple plate as per IS-15834 (2008) complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing minimum weight 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door 300 mm long, 3 nos hinges 100 mm size mortice lock 3 lever 100 mm size, anodised aluminum snap beading screws including power coating of any color complete all as specified and directed.

S&F anodised aluminium frame for door, windows, with one or more rebates including joininig cleat for fixing including powder coating of surface complete all as specified and directed

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m (minium wt) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 No.) suitable handle (1 No) 2 nos tower bolt in each shutter including powder coated complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, DG -902 complete all as specified and directed.

S&F in reapirs aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all fitting and fixer complete all as specified and directed.

S&F in repair mild steel stove enamalled black 300 mm,size ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square in each pane complete all as specified and directed.

M&L for 5mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square each pane complete all as specified and directed.

Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beds size 2 mm to 3 mm size complete all as specified and directed.

Demolition of concrete of any description in any position complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 as in plinth protection, path etc laid in alternate bays n.exc 2.50 Sqm and joints filled with mastic filling including surface finish even and smooth without using extra cement complete all as specified and directed.

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.o.06 sqm n exc.,0.18 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm (1:6) complete all as specified and directed.

M&L glazed ceramic tiles 450x300x/6/7/350x250x7 /300x200x7mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick in cm (1:4) backing coat complete all as specified and directed.

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 sqm n exc. 0.36 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm (1:6) complete all as specified and directed.

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 sqm n exc. 0.36 sqm in vertical surface/ suck as skirting and dado etc set and jointed with neat cement slurry and pointed in colur cement to match including 10 mm thick back plaster in cm (1:4) complete all as specified and directed.

M&L for 18 to 20mm thick marble stone as in platforms / counter slab/flooring and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20 mm thick over cement screed base 20mm thick screed bed in bedding layer in cm (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the the slab including grinding, rubbing and polishing complete all as specified and directed.

M&L machine cut kota stone slab 18-20mm thick in risere of step, skirting, dado and piller over cement screed base 10 mm thik (1:4) cm laid and jointed with grey cement slurry mixed with pigment to match the shade of the the slab including grinding, rubbing and polishing complete complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (40mm crushed stone aggt) as in foundation, flooring sub base, mass concrete complete all as specified and directed

M&L 25 mm thick PCC (1:2:4) Type B-1 20 mm stone aggregate as in sub floor /roof/chajja complete all as specified and directed.

S&F for 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple complete all as specified in SSR Pt-I.

S&F for 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple complete all as specified in SSR Pt-I.

Dismantling water tanks of any size any description complete all as specified and directed.

S&F in repair W.C vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & P or S trap, flush pipie complete excluding cistern complete all as specified.

S&F in repair WC vitreous china, (pedestal patern) white (excluding flushing cistern and flush pipes) including seat cover fixing bolt & P or S trap, flush pipe complete all as specified and directed

S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and waste pipe connections to pipes of capacity 10 ltr complete all as spepciified and directed.

S&F stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressur screwed both ends for iron pipe or for unions and fixed complete all as specified and directeed.

S&F in repair CP shower rose with or without swivel joints of 15 mm size complete all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair CP fancy type bib tap chromium plated cast copper alloy, screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed.

S&Fin repair Vitreous China wash basin white flat back size 580 x 450mm excluding taps waste, chain and plug, but incl brackets fixed waste pipe complete all as specified and directed.

S&F for 32mm PVC waste pipe for flushing cistern complete all as specified and directed.

S&F in repair 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed.

S&F in repair 15 mm bore cast copper alloy stop valve, fancy type chromimum plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly screwed both ends for iron pipr or union and fixed complete all as specified and directed.

S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed.

S&F in repair vitreous china urinal half stall type white fixing plugs bedding urinal against wall in cement mortar (1:2) securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465x 355x265 mm white (minimum), with grating and union for discharge pipe vitreous china urinal bowl type white fixing plugs bedding urinal against wall in cement mortar (1:2) securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed.

Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed..

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed..

S&F PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as specified and directed.

M&L in repair for 12mm thick toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape,etching of approved logo/design drilling holes required complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair 30 cm length Stainless Steel Glass Door Handle of D/Oval shape including all fittings complete all as specified and directed.

S&F in repairs, 25 mm dia stainless steel fancy type curtain rod in suitable size with and including stainless steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed.

Supply in repair and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion(where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this accountshall be made.

Providing and fixing Double Rollers blinds utilize two layer of fabric, quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with Acrylic coating resistance to Cracking & Fraying and treated for dust repellency, UV proof , virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom weight - 116.20mmX48.30mm and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete all as specified and directed.

Nand Associates (BID ID -3294881)

Alankar Traders (BID ID -3295127)

AMARJEET SINGH AND CO. (BID ID -3295578)