Construction of Germplasm Resource Network under the Research and Development funds of the Department of Genetics and Plant Breeding COA, CSKHPKV, Palampur ( SH Providing and fixing Electrical Installation)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group B. (wires of KEI/Finolex/Polycab make and accessory anchor make)

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. (KEI/Finolex/Polycab/L&T make)

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Polycab/KEI/Finolex make).

3x1.5 Sq. mm.

5x1.5 Sq. mm.

3x4.0 Sq. mm.

5x4.0 Sq. mm.

3x10 Sq. mm.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required. 2 Pair (ISI marked)

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. (Finolex/D-plast/Anchor make)

25 mm. dia (Heavy duty)

32 mm. dia (Heavy duty)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. Telephone socket outlet, Modular. Anchor (Penta series) make.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required. (Anchor make)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. (ISI mark.)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. (ISI mark.)

Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required. Anchor (Jumbo 2/3 plate)/Havells make.

Supplying and fixing bakelite batten/angle holder including connections etc. as required. (Anchor/Havells make)

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron (35 mm x 35 mm x 6 mm thick) with sufficient numbers of horizontal and vertical intermediate members (25mm x 6mm thick) flat iron including painting and bonding to the existing earth as required:-

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required. (ISI mark.)

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required. (ISI mark.)

Providing and fixing following rating, four pole, 415 volts, On-Load change over switch unit, panel mounting, front handle operation, including drilling holes in the cubical, making connections, etc. as required. 200 Amps. (L&T / C&S Make)

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required. (L&T / C&S/ Legrand Make)

100 Amp. -16 KA (Four pole)

125 Amp. -16 KA (Four pole)

160 Amp. -16 KA (Four pole)

200 Amp. -25 KA (Four pole)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. Single pole. Cat-A. (L&T/ C&S/Legrand Make)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. Double pole. Cat-A. (L&T/ C&S/Legrand Make)

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. Cat-A. (L&T/ C&S/Legrand Make)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required. (L&T / C&S / Legrand Make)

Double door-8 way

Double door-12 way

Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 25mmx5mm G.I. strip at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size. (KEI/Polycab/Hevells/L&T make)

Armoured cable 6 sq. mm (twin core)

Armoured cable 50 sq. mm (3.5 core)

Armoured cable 95 sq. mm (3.5 core)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. Ceiling Fan 1200 mm sweep, Category-A. Crompton (Smart breeze stylish design white)/Bajaj (speedster white) make

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. Exhaust Fan, Light duty, (Domestic) 300 mm sweep. Crompton (Brisk Air Neo) make.

Supplying and erection of 3 stepped steel tubular swaged and welded pole of suitable length and dia. to be fixed up to a required planting depth below G/L in a hole of excavation about 30 cm dia. and of suitable depth, to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- Overall length 7 meter, with planting depth 1.25 m, length of sections 4 m, 1.5m and 1.5m (bottom, middle and top respectively), outer dia and thickness of sections 127mmx4.5mm, 101.6mmx3.65mm and 76.1mmx3.25mm (bottom, middle and top respectively) with approximate weight 74 Kg.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 75 mm dia (OD-75 mm nominal) ( D-Plast/finolex make)

Providing and fixing ultra slim polycarbonate LED batten tube lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack complete with all accessories, connections, testing and commissioning etc. as required. 36watt-LED (Havells /Crompton make)

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 50 mm dia. G.I. pipe, heavy class

Providing and fixing LED outdoor luminaries energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 uminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith Street light bracket, electronic driver complete with all accessories, connections, testing and commissioning etc. as required. 50W LED 6K (Havells /Crompton/Bajaj make)

Supplying and fixing twin core PVC insulated weather proof aluminium conductor cable with GI bearer wire 8SWG as required complete in all respect. 2 Core 6 sq mm (ISI mark)

Supplying and Erection of All aluminium conductor of size 7/4.26 mm dia. on the pole including binding etc. as required.

Supplying and Erection of GI wire of size 4 mm (8SWG) diameter on the pole including binding etc. as required.

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (75 mm X 90 mm),G. I. bolts, nuts and washers, coach screws etc. as required.

Dismantling and re-erectioning of over head lines comprising of copper/Aluminium over head conductor, GI wire, Cross arms, insulators etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres longstay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Supplying and erection of metal frame suitable for mounting shackle insulator with D iron clumps including flat iron clumps with nuts and bolts to tightening matel frame with steel tubular pole, welded frame work made of M.S. angle iron 40 mm x40 mm x 5 mm thick duly welded complete including painting and bonding to the existing earth as required:- (Size-- 1.5 mtr x 1mtr with 1 number intermediate member of same size angle iron

Supplying and fixing following way, MCCB enclosure, sheet steel , MCCB distribution board ,415 volts on surface / recess , including painting , earthing etc. as required (Havells make) G FRAME (Four Pole)