Building

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

Corrugated DWC HDPE Pipes (Non-pressure pipes): Providing and supplying of class SN8 structured wall

polyethylene piping systems(Pipe with online/offline coupler and elastomeric sealing ring) with non-

smooth External Annular Corrugated and Smooth Internal Surfaces (double Wall) for non-pressure

underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes,

transportation, frright charges, octroi, inspection charges, loading, unloading, conveyance to the

departmental stories etc. complete.(ID Dia)

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site of work precast RCC

M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing including cost of

reinforcement M.S. Angles or Flate, curing mold work etc.

2 I) Frame suitable for 50cm opening of MH 55.00 Nos. 1121.00

2a ii) Cover suitable for 50cm opening of MH 55.00 Nos. 1173.00

Supplying and fixing of Sewerage System Eco tech Device, removable basket type composite solids

retention grating of composite material from carbon black fibre and GRP (corrosion and fire resistant

material), having minimum 7 mm thickness to withstand load of 0.5 MT & 6 mm dia. holes with suitable

clamping arrangement to suit 500 mm Dia manhole opening and depression of 250 mm on existing RCC

frame as shown in drawing, suitable for all type of Maintenance Hole including all taxes but GST (to be

paid separately in addition this rate), insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. The fixing

mechanism shall be suitable Nut & Bolt or equivalent so that only authorised person can access it for

removal or reinstallation duly endorsed and empowered by the authority

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

Excavation : Excavation for pipeline trenches for water supply, sewerage line, manhole etc. all with

shoring and strutting if required as per required gradient and line including safety provisions using site

rails and stacking excavated stuff including up to all required lead Cleaning the site etc. complete for

lifts and strata as specified.

0 to 1.5 Mt. Depth

In all sorts of soil and soft murrum

4a In hard murrum,boulders,incl. Macadam road 913.53 Cu.M 155.25

4b In soft rock and/or masonry in CM or L M or Lime Concrete. 38.81 Cu.m 187.45

4c Excavation in Bituminous road 227.74 Cu.m 288.65

Excavation : For 0 to 1.5 Mt. Depth

In Ordinary Soil

4e In Hard Murrum 111.08 Cu.m 170.20

4f In Soft Rock 31.74 Cu.m 205.85

Lowering, laying and jointing Of class SN 8 structured wall (External Annular Corrugated & Smooth

Internal surface) Polyethylene Piping and fittings with the help of coupler(online/ offline) attached with

one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the trench at all level, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient, depth & alignment, testing the water

tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete of pipes &

fittings from site stacks to the place of laying erc. as per direction of Engineer-in-charge.

Manholes : Providing and constructing Sewer manholes, scraper manholes and unit house connection

chamber, as per the type design in brick masonry in C. M. 1:5 and inside and outside 20mm thick

plastering in C. M. 1:3 necessary 100 mm coping with reinforcement in R.C.C.M. 200 fixing C. I. steps and

fixing manhole frame and covers (But excluding supply of manhole frame and covers) over manholes and

house connection chambers and fixing Manhole covers (but excluding supplying of manhole covers) over

scraper manhole etc. complete, providing and fixing safety chain wherever necessary as per the

stipulations in the type design complete as per latest CPHEEO manual. (excl. excavation).

Manhole type "A" circular type having inside diameter of 1200 mm for depth up to 1.5 m depth (for

150 mm to 500 mm Dia sewer)

i) MH type "A" up to depth 1.0 m

6a ii) Extra depth beyond 1.0 m but up to 1.5 m depth for "A" type manhole above 4.62 Rmt. 7622.20

6b i) Type "B" up to depth 1.5 m 24.00 Nos. 24283.40

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

ii) Extra depth beyond 1.5 m but up to 4.0 m depth for "B" type manhole above

Shoring or timbering: including cost of local wood material Shoring or timbering for trench with 50 mm

thick planks and suitable size struts etc. complete.

Bedding : Providing bedding incl ramming, watering, levelling, consolidating etc. completed as per

standard and instruction of engineer in charge (As above with selected earth available near site)

Refilling : Refilling the Pipeline Trenches incl. Ramming, watering, consolidating and disposal of surplus

stuff as directed within a radius of 3 KM.

Excavation for well including removing and spreading the excavated stuffs directed with all lead.

10 In all sorts of soil and soft murrum 106.45 Cu.m 147.20

10a In Hard Murrum 63.86 Cu.m 213.90

10b In Soft Rock 21.29 Cu.m 313.95

10c Hard Rock 21.29 Cu.m 757.85

10d In all sorts of soil and soft murrum 18.28 Cu.m 162.15

10e In Hard Murrum 109.66 Cu.m 228.85

10f In Soft Rock 27.41 Cu.m 328.90

10g Hard Rock 27.41 Cu.m 776.25

10h In all sorts of soil and soft murrum 8.49 Cu.m 178.25

10i In Hard Murrum 50.95 Cu.m 244.95

10j In Soft Rock 16.99 Cu.m 345.00

10k Hard Rock 8.49 Cu.m 794.65

10l In all sorts of soil and soft murrum 6.10 Cu.m 197.80

10m In Hard Murrum 30.52 Cu.m 264.50

10n In Soft Rock 9.16 Cu.m 364.55

10n Hard Rock 15.26 Cu.m 813.05

Providing and casting in situ mass cement concrete in grade M-10 (approx. corresp.to prop. 1:3:6) using

granite quartzite trap metal of size 12 mm to 25 mm incl. consolidation curing etc. complete with form

11 PCC for Raft 5.20 Cu.m 4567.80

11a pcc for steps 4.06 Cu.m 4567.80

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

Providing and cast in situ mass C.C in grade M-30 proportions ingredients as per mix design by weight

batching using granite, quartzite trap metal of size 12 mm to 20 mm and 6 mm to 12 mm including

scaffolding cantering formwork, needle vibrated consolidation, curing and hydraulic testing etc.

complete. up to 6 meter height / depth Av. G.L. for all water retaining structures.

12 Flat bottom slab/floor slab/slab with shuttering (RCC for Raft) 8.80 Cu.m 9444.95

12a Above 25 cm (RCC for Wall - long side) 45.25 Cu.m 9295.45

12b Beams/ ring beams/girders (rcc for beam) 4.56 Cu.m 9758.90

12c Precast Slab over chamber 0.20 Cu.m 9444.95

12d Flat bottom slab/floor slab/slab with shuttering (rcc for top slab) 2.78 Cu.m 9444.95

Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS

2502 including cost of steel and binding wire for reservoirs/structures only including lift up to 6 meter

height or depth below G.L. for all diameters. Do-Thermo mechanically treated (TMT)bars Fe-415 grade for

13 all diameters. 6.15 MT 84189.20

Providing Aluminium pole ladder made from channel size 44 mm x 25 mm x 3 mm and step made from non

sleep corrugated aluminium pipe 25 mm dia. complete with rubbers shores at top and bottom available in

14 Aluminium any height from 1.2 mt to 4.0mt. 9.20 Rmt. 1140.80

Cement plaster 20 mm thick in C.M. 1:2 water proofing compound of approved quality, including finishing

15 etc, complete. (Inside & outside Plaster) 206.59 Sq.m 232.30

Providing and applying Epoxy paint of approved make to concrete surface for RCC ESR of GSR or any other

structure including cleaning the surface by scrapping and air blowers to the satisfaction of Engineer-in-

charge necessary scaffolding etc. complete with all leads and lifts and giving satisfactory hydraulic test

for water tightness as per IS codes.

16 For new surface – Two coats 103.77 Sq.m 103.50

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-

17 corrosive paint etc. complete. 16.00 Nos. 144.29

Providing an fixing 25 mm x 5.2 mm MS railing with three horizontal rows and posts of angle iron of size

65 mm x 65 mm x 8 mm RCC 150 mm and 1.15 meter height and placed at 1.85 mt / c/c including

18 painting two coats and anchorage in CC etc complete. 24.00 Rmt. 88.55

19 Providing 1 mm. thick M.S. chequered plates for floor of pump house. 133.00 Kg 42.19

Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with internal cement

mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS 8329-2000). For

sewerage project cement mortar lining shall be with sulphate resistance cement.

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other

specials as per BS-EN-545/1995 Class-A series K12 suitable for use with D.I.Pipes manufactured as per

IS:8329/1994 delivery of specials is to be made to store or site of works any where in Gujarat including all

taxes, loading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete.

Flanged ended type 80 to 300 mm dia.

Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar lined D. I. Pipes of

various classes with CI / MS specials of following diameters in proper position, grade and alignment as

directed by Engineer-in-charge including hydraulic testing etc. comp.

Thrust Block Crossing: Providing and Casting in situ C.C. for Thrust Block in grade M-15 (Proportions as

per mix design or as per table 9 of IS456 2000 in masses by weight batching) using granite, quartzite trap

metal of size 6 mm to 20 mm for RCC work, including scaffolding cantering, formwork, needle vibrated

consolidation, curing complete up to 6 meter depth or height etc. complete for structure other than

water retaining. Work Includes Supplying cutting, bending, binding and placing in position steel as per

plan and design and as per ISS 2502 including cost of steel and binding wire for structures only including

lift up to 6 meter height or depth below G.L., Do-Thermo mechanically treated (TMT) bars Fe-415 grade

for all diameters.

Reinstatement of asphalt roads with asphalt Road Reinstatement : of asphalt roads with 150 mm sand,

200 mm spools, 150 mm black trap metal (25-40 mm size), 150 mm aggregate (6-12 mm), quarry dust as

inert material, watering, ramming with roller, tack coat 1 kg/ sqm, pre-mix carpet 50 mm and seal coat

mm of bitumen 80/100 over refilled soil of at least 200-300 mm on top of pipe (depending upon minimum

24 cover of 0.9 m to 1 m depending upon topography) 286.02 Sq.m 649.48

Reinstatement of roads with RCC where pipe crossing the asphalt road / rcc road / industrial area /

residential area. the Work including excavation, dressing, formwork, curing etc completed and making a

base for road, 100 mm thick PCC in M10 grade of concrete,and Providing and laying 150 mm thick RCC

M15 grade concrete, Providing TMT bars FE-415 reinforcement for RCC work including bending, binding

and placing in position etc.

Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete

M300 pneumatic compressed/vibrated by mechanically and as per approved design conforming to IS

15658: 2006 including 35mm Sand layer for levelling and filling the joint with sand in proper line and

25 level as per guidelines of IRC: SP 63 - 2018 etc. complete. 1196.00 Sq.m 683.88

PVC SWR pipes IS 13592 for Drain Pipe.

PVC fittings : Purchasing and supplying at store or site of work P.V.C. Specials as per requirement incl.

Railway freight, loading, unloading, stacking, insurance & all taxes etc. complete.

PVC Couplers 10 Kg/cm2 (Moulded)

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

PVC Bend 90 Degree(Moulded Heavy)

PVC Pipe Reducer

PVC Tee (Moulded)

26d PVC Elbow 110 mm dia. 205.00 Nos. 358.00

26e PVC SWR Pipe clamp 75 mm 400.00 Nos. 8.47

26f Vent Cowl 55.00 Nos. 25.00

26i Shoe Bend PVC 90 Degree 200.00 Each 23.73

Providing and fixing in position cowel went to pipes.(C)

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jail of the following

nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of

26k cutting and making good the walls. 40.00 Each 552.83

26l PVC SWR Gully Trap 160 x 110 40.00 Each 286.44

Removing of existing pipeline incl. removal of specials, valves jointing material including carting and

stacking of removed material from site of work to the department store as directed excl. excavation and

Painting two coats (excluding priming coat) on external surface of new rain water, soil, waste and vent

pipes and fittings with ready mixed bituminous brushing, black, anticorrosive to give an even shade

28 including cleaning of all dirt, dust and other foreign matter. (C) 100mm dia. 3.00 Sq.m 25.78

Supplying, fixing and jointing PVC/SWR pipe (of required diameter) on vertical walls for

soil/waste/rainwater drainage system including cutting chase in masonry/concrete wall, jointing with

suitable solvent cement, providing white cement and cement mortar grouting around pipe, sealing with

waterproofing chemical-based pest-resistant compound, finishing surface with white cement putty,

applying primer and painting two coats of synthetic enamel paint, including curing, scaffolding, and all

necessary labour and material, etc. complete as directed by Engineer-in-charge.

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

SUBMERSIBLE NON-CLOG VERTICAL PUMP: Supply, installation, testing & commissioning of sewage

submersible, non clog type suitable for working on three phase, 50 Hz ± 3%, 415 V ± 10%, AC supply,

RPM synchronous speed with 3 core flat copper cable from pump to starter panel with cable end

terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc.

complete set & following M.O.C: Casing: CI, Impeller: SS CF8M, Wearing ring & Bearing bush: Bronze, TC

mechanical seal, CS / SS bearing, SS shaft with sleeve, SS strainer & MS motor body.

Capacity of pump - 139 lpm & 7 m. head (2.2 kW/ 3 HP) - 1 Woking + 1 standby

Manufacture, Supply & Delivery of flanged steel cylinder reinforced concrete or CI DF/ Class-A pipes

vertically including clamps at every 3 mt. incl. jointing materials such as nuts, bolts, rubber packing,

hydraulic testing and necessary scaffolding etc. complete.

30 80 mm Dia. - Delivery Pipe for For Average Flow Flow 20.00 Rmt. 2656.00

30a 100 mm Dia. - Header Pipe 6.00 Rmt. 3108.00

Providing and making flanged joints to flanged CI Pipes of all classes/specials etc. including of all jointing

materials rubber packing, nuts, including lowering, laying, jointing labour hydraulic testing etc. complete.

80 mm Dia. - Delivery Pipe for For Average Flow Flow

31a 100 mm Dia. - Header Pipe 2.00 Joints 477.00

Butter Fly Valve : Providing and supplying ISI mark CI D/F Butterfly Valves as per IS 13095 (Latest

Edition) of following class and diameter including Lowering, laying & jointing in position following

Butterfly Valve including cost of all labour, jointing material, including nut bolts and giving satisfactory

hydraulic testing etc. complete. including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores, stacking etc complete.

80 mm Dia (PN 1.0) - On Delivery pipe - For Average Flow

32a 100 mm Dia (PN 1.0) - On Header pipe 0.87 Nos. 3067.85

Reflux Valve : Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312 (Latest Edition) of

following class and diameter including Lowering, laying & jointing in position following Reflux Valve

including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing

etc. complete. including all taxes, insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc. complete.

80 mm Dia (PN 1.0) - On Delivery pipe - For Average Flow

SITC of flange ends Expansions bellow as per EJMA standards of overall length og minimum 300 mm,

designed for 15 mm axial compression and 5 mm axial extension with tie roads of following MOC &

pressure ratings. MOC : Bellows : SA 240 Gr. 304, Internal Sleeve : SA 240 Gr. 304, Weldends : IS 2062 Gr.

B, Flanges : IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392) & Limit Rods & Nuts: CS - IS

80 mm Dia. (PN 1.0) - On Delivery Pipe - For Average Flow

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

CI Specials - Manufacture, Supply & Delivery of 80 mm to 700 mm Dia cast iron Flange socket spigot

bends, tees, reducers or any other specials as per IS:5531-1977 (part-I to III) or its latest evision if any,

delivery of specials is to be made to Gov. store or site of works any where in Gujarat including all taxes,

liading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete.

80 to 300 mm Dia.

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory

calibrated, Regular Power Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser

with all accessories viz. surge arrestor, associated cables, cabinets, hardwares, etc complete as per

following specifications:

1. Flow Meter / Sensor : DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or

equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy

Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/ Polyurethane/ Hard Rubber/ Rilsan lining,

SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction Box, CS

2. Flow Transmitter / Converter (Remote Field Mounted) : Microprocessor based, Modular design, 2 line

LCD for indication of actual flow rate, forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to

m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status output, IP

protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass

window enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter

communication etc along with wall mounted/ stand mounted cabinet.

On Header Pipe - 100 mm NB

Providing & erecting chain pulley block with tripple gear arrangement, lifting hook, load chain & hand

chain & locking device with necessary mounting girder / structure, spur gear travelling trolley & all

37 1 Tonnes capacity 1.00 Nos. 14400.00

Incomer of MCC Panel :

250A, 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free mechanism, current

limiting type with Thermal-Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable

settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-

Mechanical protections & interlocks etc. MCCB module, when used as Incommer / Bus Coupler- 4 Pole,

MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), TM release

DOL / Star Delta starter suitable for local & remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination including digital voltmeter, analogue ammeter

with selector switch, run hour meter, required protective relays & control accessories.

39 D.O.L. UPTO 3 HP - For Average Flow 2.00 Nos. 6924.00

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

Supply, installation, testing & commissioning heavy duty APP type capacitor unit, vacuum impregnated

with non-PCB / non toxic oil, internally delta connected with built in internal fuses complete with

discharge resistances & terminal cover, rated for 440 V AC, 3 Phase, 50 Hz as per IS: 13585 Part-1.

1 KVAR - 0 Nos, 1 KVAR - 2 Nos, 1 KVAR - 0 Nos

1.1k Grade cable:

Supply, laying , testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor,

galvanised steel flat strip/ round wire armoured, extruded PVC type ST2 sheathed, heavy duty (to be lad

on wall surface with necessary clamps/in existing cable trench / cable trays/ conduit/ pipe sleeve at road

crossing or floor as per site requirement) conforming to IS: 7098(part-1) & IEC: 60502(part-1):

1 Run 4 Core 6 sq mm - Supply Side

41a 1 Run 3 Core 4 sq mm - Motor Side - For Average Flow 40.00 m 61.00

41b 1 Run 4 Core 4 sq mm - For LDB 20.00 m 70.00

Cable Glands: Supplying and fitting heavy duty Double compression brass cable glands with washers &

rubber ring for confirming to IS, Suitable for following cables:

42 4 Core 6 sq mm 2.00 Nos. 107.00

42b 3 Core 4 sq mm 4.00 Nos. 107.00

42b 4 Core 4 sq mm 2.00 Nos. 107.00

Cable Lugs : Supplying and fitting crimping type cable termination (Lugs) conforming to IS of following

types and sizes: Aluminium Tubular Terminals (Long Barrel) (in Sq. mm.)

43b 4 sq.mm 8.00 Nos. 2.00

Cable Tray & Accessories: Supply & laying GI ladder type cable trays with side channels of size- 75 x 15 x

15 mm & rungs of size - 35x 15x 15 mm spaced at 250 mm apart, fabricated from 2 mm thick sheet stell in

standard length of 2.5 meter, duty not dipped galvanized after fabrication as per IS 2629 1989/IS 4759-

1984 including accessories such as couple plates/ fish plates, bends, tees, reducers, elbow, covers, and

electo galvanized hardware etc. erected on existing support as per specification and instruction of

engineer in charge.

150(W) X 100(H) X 2.0 mm Thick

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

Earthing: Supplying & erecting Funnel type earthing having earth plate of following size burrid in

specifically prepared earth pit 3 m below ground with 40 kg charcoal & salt with alternate layers of

charcoal & salt , 20 mm Dia GI pipe with funnel with a wire mesh for watering & brick masonry block CI

cover complete as per para 7.3 of IS 3043 with necessary length of double GI/copper earth wire No.6 SWG

bolted with lug to the plate & covered in 12 mm Dia GI pipe 2.5 mt. long complete connected to the

nearest switch gear with ends socket as per direction & duly tested by earth tester conforming to IS (As

per Drawing) with following specifications.

With 45 X 45 X 0.35 cms CI earth plate

Providing and erecting required size HOT deep Galvanised Strip for earthing of Transformer, LT Pannel

46 board, Motors, etc. using necessary clamps. 50.00 Kg 90.90

Supplying rubber matting of 4 mm thickness as per IS:15652/ IEC 61111 of required length and breadth

47 with good insulation property for 22kV. 4.00 Sq.m 1212.00

Supply & erection metallic vitrified danger notice board for Medium voltage installation to be erected as

48 per IS. 2.00 Nos. 80.80

Providing Printed instruction chart both in English & Gujarati and duly frame with front glasses for

49 treatment of person suffering from electric shock 1.00 Nos. 151.50

Supplying stand First aid box with antiseptic cream medicine for use on wounds due bum, crepe bandage,

gauge, medicated ready to use bandage.(Band-aid) adhesive tape maditional user, scissors, anticeptic

solution (sevlon or similar) etc. (All above contents shell be of standered makes)

Supplying & erecting FIRE bucket round bottom of 9 lit. capacity made out of 24 gauge GI sheet with

extra handle at bottom duly painted white inside & red out side with fire mark filled with dry sand & kept

51 on existing stand provided or hund on wall hook 4.00 Nos. 252.50

Supplying & erecting floor mounting stand for keeping 4 nos of fire buckets comprising 1500 mm in length

& 900 mm height made out of 30mmX30mmX4mm angle iron with cross supports for lags welded with

hooks & duly painted with one coat of red lead & two coats of approved enammeled silver paint

Design, Supply, Installation, Testing, and Commissioning of a 200 KLD Packaged Sewage Treatment Plant

(STP) based on MBBR technology/Open technology, suitable for continuous 24x7 operation at a hospital

site. The STP is designed to handle an average sewage flow of 8.33 m³/hr, with inlet characteristics of

BOD 250-300 mg/l, COD 400-500 mg/l, TSS 250-350 mg/l, and O&G up to 50 mg/l. The treated effluent

quality will comply with GWSSB and CPCB discharge norms (BOD ≤ 20 mg/l, TSS ≤ 10 mg/l, COD < 50 mg/l,

Fecal Coliform < 100 MPN/100ml).The treatment scheme includes Fine Screening, Collection Tank, Anoxic

Tank, MBBR Biological Reactor, Plate Settler, Chlorination, Dual Media Filter, Activated Carbon Filter, UV

Disinfection, and Sludge Dewatering Unit (Filter Press/Bag Filter).

Sewage Treatment Plant (STP) based Capacity- 200 KLD at MG Hospital.

SR NO. ITEM DESCRIPTION Total QTY. UNIT RATE (RS.) AMOUNT (RS.)

Box cutting the road surface to proper slope and camber for making a base for road work including

removing the excavated stuff and deposing on the road slope as directed up to 50 mt. lead.

Providing and laying cement concrete 1:3:6 (1-cement:3-coarse sand:6-hand broken stone aggregates

40mm nominal size) and curing completed excluding cost of formwork in (A) foundation and plinth.

Providing and laying ordinary cement concrete 1:2:4 (1-cement: 2-coarse sand: 4-graded stone

aggregates 20mm nominal size) and finishing smooth with, curing etc. completed excluding the cost of

56 formwork in (A) foundation and plinth 21.00 Cu.m 3631.49

Providing TMT bars FE-415 reinforcement for RCC work including bending, binding and placing in position

57 complete up to floor two level 1050.00 Kg 67.26

OPERATION & MAINTENANCE FOR SEWAGE TREATMENT PLANT (STP) 1 YEAR

comprehensive operation and maintenance for the 200 KLD Packaged Sewage Treatment Plant (STP). This

includes routine, preventive, and emergency maintenance for the complete STP system comprising

screening, biological treatment, filtration, disinfection, and sludge handling units. The contractor shall be

responsible for ensuring uninterrupted and efficient functioning of all systems, including deployment of

trained manpower, supply of all necessary consumables, spareparts, and chemicals, and maintaining

detailed records of daily and monthly operations, breakdowns, treated water quality, and maintenance

schedules, along with periodic training to Authority staff for smooth handover in future.The rate shall also

include all consumables and deployment of Manpower but excluding electric power (The electrical bill for

power shall be paid by the Authority) . The O & M work shall be carried out as per detailed specifications

in the tender & maintaining the record for the same.

For 1st year O&M

Total for Schedule-B1 (Rs.)

Signature of the Contractor Dy.Executive Engineer Executive Engineer

PIU, Surendranagar PIU, Surendranagar